Abstract:Excellent strain hardening capabilities are known to be the unique strategies to hold the key towards a good strength-ductility balance in Al − base composites. Herein, in-situ Fe-aluminide (FeAl) reinforced Al − matrix composites (Al/Fe-aluminide) were fabricated by a twostep thermal processing method: sintering (900 °C/1 h), and uniaxial forging (400 °C, deformation up to 20 % ). The reinforcements were formed in-situ by the exothermal reaction between the host Al matrix and Fe2O3 nanoparticles during sintering Measured strain rate sensitivity ( m = 0.035)and strain rate recovery rate ( η r ) highlighted that deformation during forging enhances strain hardening ability of the composites. Comprehensive characterization reveals high density of geometrically necessary dislocation ( ρ G ∼ 1 × 10 15 m − 2 ) usually persists near the grain boundaries (GBs) and the triple junctions of highly textured FCC − Al grains. Microtextural and Kernel average misorientation (KAM) measurements highlighted existence of strong deformation texture of Bras { 110 } < 112 > and Goss { 110 } < 001 > 2 in FCC − Al matrix induce strong resistance to plastic deformation. While nanoindentation response based on plastic flow corresponding to activation volume ( V * ∼ 42 b 3 ) revealed that activities of GB interface − dislocation interaction induced strain accumulation at the FCC − Al GB interface zones involved in a thermally activated process promotes the evolution of ρ G distribution during straining sustain larger strains. The results reveal that the simultaneous attainment of both these processes improves global strain hardening behavior which is advantageous for the enhancement of resistance to failure.

The ordered nanoporous CrFe alloy with rapid strain hardening ability

Microstructure evolution and composition redistribution of FeCoNiCrMn high entropy alloy under extreme plastic deformation

Inherent and Multiple Strain Hardening Imparting Synergistic Ultrahigh Strength and Ductility in a Low Stacking Faulted Heterogeneous High-Entropy Alloy

Multistage strain hardening facilitated by in-situ TiO(C) nanoparticles in CoCrFeMnNi high entropy nanocomposite subjected to high strain rate compression

Decipher multiple deformation mechanisms in a FeCrCoNi medium entropy alloy for sustained work hardening

Deformation mechanism and microstructure evolution during superplastic deformation of friction stir processed CoCrFeNiMn high entropy alloy

High strength and ductility in a dual-phase hetero-structured AlCoCrFeNi2.1 eutectic high-entropy alloy by powder metallurgy

Anomalous dislocation response to deformation strain in CrFeCoNiPd high-entropy alloys with nanoscale chemical fluctuations

Preparation of Nanoporous CoCr Alloy by Dealloying CrCoNi Medium Entropy Alloys

An order-disorder core-shell strategy for enhanced work-hardening capability and ductility in nanostructured alloys

Unraveling the Deformation Behavior of the Fe45Co25Ni10V20 High Entropy Alloy

Improving strain hardening behavior in nano-intermetallic reinforced aluminum in-situ composites through an optimized twostep thermal processing method; sintering and uniaxial forging

Achieving High Strength and Deformability in a High Entropy Alloy Containing the Multiscale Phase Structure

Nanolamellar medium entropy alloy composites with high strength and large plasticity

Stable strain hardening behavior of Ti-4Al-5Mo-5V-5Cr-1Nb alloy during plastic deformation

Investigation of microstructures and strengthening mechanisms in an N-doped Co-Cr-Mo alloy fabricated by laser powder bed fusion

High Strength and Deformation Stability Achieved in CrCoNi Alloy Containing Deformable Oxides

Hierarchical Grain Size and Nanotwin Gradient Microstructure for Improved Mechanical Properties of a Non-Equiatomic CoCrFeMnNi High-Entropy Alloy

Strong and ductile CrCoNi medium-entropy alloy via dispersed heterostructure

Microstructure and mechanical properties of Al-Fe-Co-Cr-Ni high entropy alloy fabricated via powder extrusion

Nanocrystalline FeCr alloys synthesised by severe plastic deformation -- a potential material for exchange bias and enhanced magnetostriction