Abstract:From the stripping points, the high intensity proton beam of a compact cyclotron travels through the fringe field area of the machine to the combination magnet. Starting from there the beams with various energy is transferred to the switching magnet for distribution to the beam line targets. In the design of the extraction and transport system for the compact proton cyclotron facilities, such as the 70MeV in France and the 100MeV in China, the space charge effect as the beam crosses the fringe field has not been previously considered; neither has the impact on transverse beam envelope coupled from the longitudinal direction. Those have been concerned much more with the higher beam-power because of the beam loss problem. In this paper, based on the mapping data of 70MeV cyclotron including the fringe field by BEST Cyclotron Inc (BEST) and combination magnet field by China Institute of Atomic Energy (CIAE), the beam extraction and transport are investigated for the 70MeV cyclotron used on the SPES project at Istituto Nazionale di Fisica Nucleare, Laboratori Nazionali di Legnaro (INFN–LNL). The study includes the space charge effect and longitudinal and transverse coupling mentioned above, as well as the matching of beam optics using the beam line for medical isotope production as an example. In addition, the designs of the ±45° switching magnets and the 60° bending magnet for the extracted beam with the energy from 35MeV to 70MeV have been made. Parts of the construction and field measurements of those magnets have been done as well. The current result shows that, the design considers the complexity of the compact cyclotron extraction area and fits the requirements of the extraction and transport for high intensity proton beam, especially at mA intensity levels.

Compact beam position monitor using a segmented toroidal coil

A method of bunch by bunch measurement at nanoseconds interval by using cavity beam position monitors

In situ beam trajectory tilt measurement based on single cavity beam position monitor

Subpicosecond Beam Length Measurement Study Based on the Tm010 Mode

High Intensity Proton Beam Transportation Through Fringe Field of 70 MeV Compact Cyclotron to Beam Line Targets

Three Dimensional Compensation Spherical Coils for Compact Atomic Magnetometers

A Beam Monitor for Ion Beam Therapy Based on HV-CMOS Pixel Detectors

Design and test of a compact beam current monitor based on a passive RF cavity for a proton therapy linear accelerator

Electron Beam Characterization via Quantum Coherent Optical Magnetometry

A novel fiber-optic beam monitor

The Development of Low-Q Cavity Type Beam Position Monitor with a Position Resolution of Nanometer for Future Colliders

A Novel Method for Transverse Beam-Coupling Impedance Measurements in Particle Accelerator Devices Using the Bead-Pull Method

Dedicated beam position monitor pair for model-independent lattice characterization at NSLS-II

Button-Type Beam Position Monitor Development for Fourth-Generation Synchrotron Light Sources: Numerical Modeling and Test Bench Measurements

A prototype scintillating fibre beam profile monitor for Ion Therapy beams

Directional-sensitive wide field-of-view monitoring of high-intensity proton beams by spectral tracking of scattered particles with scattering foil and miniaturized radiation camera

The XBPF, a new multipurpose scintillating fibre monitor for the measurement of secondary beams at CERN

High Resolution and High Precision Beam Profile Monitor for Particle Accelerator using linear contact image sensor

Train probe for beam diagnostics of the SC200 superconducting cyclotron

The Beam Conditions Monitor of the LHCb Experiment