Flow Characteristics of Foam in Fracture Networks
Zhengxiao Xu,Aiqing Cao,Longkun Chen,Shiti Cui,Guangming Yu,Zhaomin Li
DOI: https://doi.org/10.1021/acs.iecr.0c04200
2020-01-01
Industrial & Engineering Chemistry Research
Abstract:Foam is widely used in fractured reservoirs. However, few studies on the flow characteristics of foam fluid in fractures have been presented, and the flow mechanism of foam in complex fracture networks remains unclear. In this study, a variety of fracture models are used to systematically evaluate the flow characteristics of foam in fractures. First, based on the variable-thickness fracture and parallel fracture models, the variations in foam flow resistance and velocity are explored. Then, the foam flow path and sweep efficiency are evaluated with complex fracture network models. The results show that the foam flow resistance increases with increasing foam quality. At a higher foam quality (90%-92%), the pressure drop peaks and then decreases sharply as the foam quality increases. When the foam quality ranges from 50% to 90%, the foam volume increases with increasing foam quality, and the bubbles have larger diameters in thicker fractures. When foam flows in parallel fractures with different thicknesses, it preferentially flows in thick fractures (100 mu m), and gas trapping occurs in the thin fractures. When the foam flows in a complex fracture network, the pressure drop increases with increasing foam quality and flow rate, and the foam quality corresponding to the maximum pressure drop is independent of the flow rate. In the vertical intersecting fracture network model, the range of flowing foam is the most extensive when the foam quality is 80%-90%. In the irregular fracture network model, when the foam quality reaches 92%, the volumetric sweep efficiency reaches a maximum of 86.97%. These findings reflect that it is necessary to consider fractures when foam flows in fractured/vuggy reservoirs and that reasonable predictions can be made with experimental results.