Abstract:Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Ahead of Print. A detailed computational study was carried out to explore how the presence of a cavity and cavity angles influence the performance and combustion mechanisms within a scramjet combustor. This research utilized ANSYS Fluent 2021 to create hexahedral meshes and simulate the complex fluid dynamics in scramjet engines equipped with dual strut injectors. The simulations addressed various critical aspects of fluid mechanics, including the continuity, momentum (via the Navier-Stokes equations), and energy equations. These equations were used to model non-reacting flows, while the species transport equations were applied to analyse reacting flows. The turbulence within the combustor was modelled using the standard K-ε model, a common choice for such high-speed aerodynamic evaluations. The study's primary goal was to assess the effects of different geometrical configurations of cavity flame holders on the performance characteristics of an H2-based scramjet combustor overall efficiency, focusing on mixing efficiency, combustion performance, and total pressure loss. Both configurations with and without a cavity were examined. Key findings indicate that incorporating a cavity into the combustor design leads to developing a robust recirculation zone within the cavity area. This recirculation zone is pivotal in enhancing fuel-air mixing and combustion efficiency, with cavity-based combustors showing an earlier onset of combustion and achieving peak combustion efficiencies around 90–95%. The extent of the recirculation region is notably influenced by the proximity of the strut injector to the cavity's length. Additionally, the presence of a shear layer within the cavity generates a weak shock at the cavity's trailing edge. This shock interaction can adversely affect scramjet combustor performance, especially at higher cavity angles (α) and specific geometric configurations, such as an L/D ratio of 4 and α=30°. The L/D ratio of 4 and α=30° combustor model results in a 13.8% increase in turbulence intensity, which raises air-fuel mixing and there by improves mixing and combustion efficiency by 14.23% and 13.34%, compared to the other depth of the cavities. This advantage is critical, especially considering the compact length of the combustor, which is a desirable attribute in scramjet design.

Zero-dimensional Analysis of Thermal Choking in Arbitrary Duct with Application to Dual-mode Ramjet Combustor

Numerical Study of Heat Flux Reduction Mechanism of the Counterflowing Jet in Rarefied Flows

Investigations of the Effect of Constant-Area Section on Thermal Choking in A Dual-Mode Scramjet Combustor

Numerical Investigation on the Effect of Inflow Mach Numbers on the Combustion Characteristics of a Typical Cavity-Based Supersonic Combustor

Flow Field Characteristics Analysis and Combustion Modes Classification for a Strut/cavity Dual-Mode Combustor

Investigation on the mode transition of a typical three-dimensional scramjet combustor equipped with a strut

Experimental research on the thermal throat of rocket based combined cycle combustor

Numerical investigation on influence of different geometrical cavity flame holders and flame stabilization mechanism in hydrogen fueled multi-strut-based scramjet combustor

Effect of Continuous Mach Number Variation of Incoming Flow on Ram–scram Transition in a Dual-Mode Combustor

Scramjet Intake Aerodynamic Studies Using Sharp Interface Immersed Boundary Method

NUMERICAL SIMULATION OF A DUAL-COMBUSTIORSCRAMJET FLOW-FIELD

Numerical Investigation on Performance of Axisymmetric Variable Geometry Scramjet Combustor Equipped with Strut Flame Holder

Control-oriented Modeling and Real-Time Simulation Method for a Dual-Mode Scramjet Combustor

Investigation of Performance and Mode Transition in a Variable Divergence Ratio Dual-Mode Combustor

Thermodynamic Analysis and Parametric Study of a Closed Brayton Cycle Thermal Management System for Scramjet

Numerical Investigation of the Distributed Combustion in the Thermal Choked Solid Fuel Combined Cycle Engine

Analysis of In-cylinder Flow in a Small-Bore Spark-Ignition Engine Using Computational Fluid Dynamics Simulations and Zero-Dimensional-Based Modeling

Numerical Investigation on Internal Regressing Shapes of Solid-Fuel Scramjet Combustor

Design Procedure of a Variable Rectangular Inlet for TBCC Engine Considering Mass Flow Requirements

Thermodynamic Analysis of the Second Fluid Brayton Cycle for Scramjet Engine

A decoupled procedure for convection-radiation simulation in scramjets