Abstract:Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Ahead of Print. A detailed computational study was carried out to explore how the presence of a cavity and cavity angles influence the performance and combustion mechanisms within a scramjet combustor. This research utilized ANSYS Fluent 2021 to create hexahedral meshes and simulate the complex fluid dynamics in scramjet engines equipped with dual strut injectors. The simulations addressed various critical aspects of fluid mechanics, including the continuity, momentum (via the Navier-Stokes equations), and energy equations. These equations were used to model non-reacting flows, while the species transport equations were applied to analyse reacting flows. The turbulence within the combustor was modelled using the standard K-ε model, a common choice for such high-speed aerodynamic evaluations. The study's primary goal was to assess the effects of different geometrical configurations of cavity flame holders on the performance characteristics of an H2-based scramjet combustor overall efficiency, focusing on mixing efficiency, combustion performance, and total pressure loss. Both configurations with and without a cavity were examined. Key findings indicate that incorporating a cavity into the combustor design leads to developing a robust recirculation zone within the cavity area. This recirculation zone is pivotal in enhancing fuel-air mixing and combustion efficiency, with cavity-based combustors showing an earlier onset of combustion and achieving peak combustion efficiencies around 90–95%. The extent of the recirculation region is notably influenced by the proximity of the strut injector to the cavity's length. Additionally, the presence of a shear layer within the cavity generates a weak shock at the cavity's trailing edge. This shock interaction can adversely affect scramjet combustor performance, especially at higher cavity angles (α) and specific geometric configurations, such as an L/D ratio of 4 and α=30°. The L/D ratio of 4 and α=30° combustor model results in a 13.8% increase in turbulence intensity, which raises air-fuel mixing and there by improves mixing and combustion efficiency by 14.23% and 13.34%, compared to the other depth of the cavities. This advantage is critical, especially considering the compact length of the combustor, which is a desirable attribute in scramjet design.

Scramjet Intake Aerodynamic Studies Using Sharp Interface Immersed Boundary Method

SHOCK INDUCED SEPARATING FLOWS IN SCRAMJET INTAKES

High fidelity simulations of unstart phenomena in a scramjet inlet due to angle of attack

Design optimization and off-design performance analysis of axisymmetric scramjet intakes for ascent flight

Unstart Simulation of Scramjet Inlets

Numerical simulation of MHD flows in 2-D scramjet inlets

Effect Of Inlet Performance And Starting Mach Number On The Design Of A Scramjet Engine

Numerical Investigation of the Injection Scheme for One Rectangular RBCC Engine at Scramjet-Mode

Dynamic multi-objective optimization of scramjet inlet based on small-sample Kriging model

Calculation of Unstarted Flow in Hypersonic Inlet-Isolator with High Back Pressure

Numerical investigation on implication of innovative hydrogen strut injector on performance and combustion characteristics in a scramjet combustor

Numerical Investigation on a Typical Scramjet Combustor Using Cavity Floor H2 Fuel Injection Strategy

Computational analysis of the scramjet mode of the RBCC inlet using micro vortex generators

Effect of Leading-Edge Bluntness on Shockwave–Boundary-Layer Interaction in a Scramjet Intake

Numerical Investigation on Hydrogen Combustion in a Scramjet with 3D Sidewall Compression Inlet

Integrated flow field calculation of a modularized scramjet

Numerical investigation on influence of different geometrical cavity flame holders and flame stabilization mechanism in hydrogen fueled multi-strut-based scramjet combustor

Design of a Three-Dimensional Hypersonic Inward-Turning Inlet with Tri-Ducts for Combined Cycle Engines

Numerical Investigation on the Effect of Inflow Mach Numbers on the Combustion Characteristics of a Typical Cavity-Based Supersonic Combustor

Performance of Wavecatcher Intakes at Angles of Attack and Sideslip

Three Dimensional CFD Analysis of Two-Strut Assisted Scramjet Combustor