Abstract:The effect of thermal surface cleaning on the Gilbert damping, $\alpha$, of yttrium iron garnet (YIG), before capping with a metallic layer, has been investigated. Our results show that $\alpha$ is strongly effected by relatively mild annealing conditions (T = 300 C) when performed in a vacuum. This increase needs to be taken into account when obtaining the spin mixing conductance from spin pumping measurements. We measure an increase in $\alpha$ by a factor of 8 when the YIG is vacuum annealed at 300 C. No such changes in $\alpha$ are observed when annealed at the same temperature in 0.1 mbar of oxygen.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is: in yttrium iron garnet (YIG), the effect of surface thermal cleaning treatment on its Gilbert damping ($\alpha$). Specifically, the researchers explored the changes in Gilbert damping of YIG after low - temperature annealing treatment in vacuum and oxygen environments. This problem is of great significance for understanding the performance of YIG in spin - pumping measurements and accurately obtaining the spin - mixing conductance. ### Research Background As a magnetic insulator, YIG has a wide range of applications in the field of spintronics, especially in the transmission of pure spin currents. However, in practical applications, YIG usually needs to be used in combination with other metal layers. For example, the spin accumulation generated by magnetization precession is transferred to the adjacent metal layer through spin - pumping. To ensure the effectiveness of these structures, it is crucial to understand the influence of different treatment conditions on the material properties of YIG. ### Main Problems 1. **Effect of Vacuum Annealing on Gilbert Damping**: - It was found that after annealing in a vacuum environment at 300°C for 15 minutes, the Gilbert damping of YIG increased significantly, with an increase of up to 8 times. - Expressed by the formula: \[ \alpha_{\text{vacuum}} = 8\times\alpha_{\text{initial}} \] - This phenomenon indicates that certain chemical or physical changes may have occurred during the vacuum annealing process, resulting in a change in the magnetic properties of YIG. 2. **Annealing Effect in an Oxygen Environment**: - When annealing at the same temperature (300°C) but in an oxygen environment of 1×10$^{-1}$ mbar, the Gilbert damping of YIG hardly changed. - Expressed by the formula: \[ \alpha_{\text{oxygen}}\approx\alpha_{\text{initial}} \] 3. **Effect of Aluminum Overlayer**: - Depositing a 2 - nm - thick aluminum overlayer also led to a significant increase in Gilbert damping, regardless of whether heat treatment was carried out or not. - Expressed by the formula: \[ \alpha_{\text{Al - capped}}>\alpha_{\text{initial}} \] ### Conclusions The research shows that moderate vacuum annealing treatment or adding an aluminum overlayer can significantly increase the Gilbert damping of YIG. Especially under vacuum annealing conditions, this increase is particularly obvious. Therefore, when conducting spin - pumping measurements, the influence of these treatment conditions on the material properties of YIG must be considered to ensure the accuracy of experimental results. In addition, the research also proposes that the increase in Gilbert damping may be due to the reduction of Fe$^{3+}$ to Fe$^{2+}$, which is consistent with the results of soft X - ray magnetic spectroscopy. This finding not only helps to understand the microscopic mechanism of YIG materials but also provides an important reference for optimizing the design of spintronic devices.

Increased Gilbert damping in Yttrium Iron Garnet by low temperature vacuum annealing

Cubic Yttria Stabilized Zirconia Sintering Additive Impacts: A Comparative Study

Short-Wavelength Spin Waves in Yttrium Iron Garnet Micro-Channels on Silicon

Effects of post-deposition annealing on the structure and magnetization of PLD grown Yttrium Iron Garnet films

Giant anisotropic Gilbert damping and spin wave propagations in single-crystal magnetic insulator

Structural, Magnetic, and Low-Temperature Electrical Transport Properties of YIG Thin Films with Heavily Reduced Oxygen Contents

Yttrium Iron Garnet Thin Films with Very Low Damping Obtained by Recrystallization of Amorphous Material

Pulsed laser deposition of epitaxial yttrium iron garnet films with low Gilbert damping and bulk-like magnetization

Aluminium substituted yttrium iron garnet thin films with reduced Curie temperature

Origin of high-frequency magnetic loss of Y3Fe5O12 single crystal thin films prepared with high-throughput screening by magnetron sputtering

Effect of Air Annealing on the Color Center in Yb:Y3Al5O12 Transparent Ceramics with MgO As Sintering Additive

Angular-dependent spin-wave modes observations and excitation origins in Yttrium iron garnet thin films

Enhancement of YIG$|$Pt spin conductance by local Joule annealing

Integration and characterization of micron-sized YIG structures with very low Gilbert damping on arbitrary substrates

Damping Enhancement in YIG at Millikelvin Temperatures due to GGG Substrate

Crystallization Dynamics of Amorphous Yttrium Iron Garnet Thin Films

On the oxygen vacancy annealing in air plasma sprayed YSZ thermal barrier coatings

Influence of vacuum annealing temperature on damping performance of NiCrAlY composite coatings

Ultra-low damping in lift-off structured yttrium iron garnet thin films

Microwave magnon damping in YIG films at millikelvin temperatures

Room- and low-temperature magnetic parameters of Y$_3$AlFe$_4$O$_{12}$ garnets