Abstract:The deployment of a growing number of devices in Internet of Things (IoT) networks implies that uninterrupted and seamless adaptation of wireless communication parameters (e.g., carrier frequency, bandwidth and modulation) will become essential. To utilize wireless devices capable of switching several communication parameters requires real-time self-optimizations at the radio frequency integrated circuit (RFIC) level based on system level performance metrics during the processing of complex modulated signals. This article introduces a novel design verification approach for reconfigurable RFICs based on end-to-end wireless system-level performance metrics while operating in a dynamically changing communication environment. In contrast to prior work, this framework includes two modules that simulate a wireless channel and decode waveforms. These are connected to circuit-level modules that capture device- and circuit-level non-idealities of RFICs for design validation and optimization, such as transistor noises, intermodulation/harmonic distortions, and memory effects from parasitic capacitances. We demonstrate this framework with a receiver (RX) consisting of a reconfigurable complementary metal-oxide semiconductor (CMOS) low-noise amplifier (LNA) designed at the transistor level, a behavioral model of a mixer, and an ideal filter model. The seamless integration between system-level wireless models with circuit-level and behavioral models (such as VerilogA-based models) for RFIC blocks enables to preemptively evaluate circuit and system designs, and to optimize for different communication scenarios with adaptive circuits having extensive tuning ranges. An exemplary case study is presented, in which simulation results reveal that the LNA power consumption can be reduced up to 16x depending on system-level requirements.

Autonomous Nonlinear Passive Transmit-Receive Switch for Compact IoT Devices: A Three-Port Agile Network

A 2.85mm 2 RF Transceiver in 40nm CMOS for IoT Micro-Hub Applications

High-speed Silicon-Integrated Photonic Radio Frequency Switch Based on Optical Switching.

Two 180nm CMOS Wireless Transceivers for IoT Applications

RF-Transformer: A Unified Backscatter Radio Hardware Abstraction

A Low-Cost ISM-Band Multi-Transceiver Cognitive Radio

Reconfigurable Intelligent Surface Enhanced Massive IoT Systems with Nonlinear Measurements

TinySDR: Low-Power SDR Platform for Over-the-Air Programmable IoT Testbeds

RF-transformer

Toward Wireless System and Circuit Co-Design for the Internet of Self-Adaptive Things

Robust Relay in Narrow-Band Communications for Ubiquitous IoT Access.

A CMOS SPDT RF Switch with 68 Db Isolation and 1.0 Db Loss Feathering Switched Resonance Network for MIMO Applications

An Energy-Efficient Low-Voltage Swing Transceiver for mW-Range IoT End-Nodes

Overview of Reconfigurable Antenna Systems for IoT Devices

A Low Power Reconfigurable Digital Polar Transmitter for IoT Applications

A 24-30Ghz 4-Element Phased Array Transceiver with Low Insertion Loss Compact T/R Switch and Bidirectional Phase Shifter in 65 Nm CMOS Technology

Optimal Operation of Active RIS-Aided Wireless Powered Communications in IoT Networks

Intelligent wireless power transfer via a 2-bit compact reconfigurable transmissive-metasurface-based router

A 180nm CMOS wireless transceiver by utilizing guard band for narrowband IoT applications

Power Efficient Cooperative Communication within IIoT Subnetworks: Relay or RIS?

Non-reciprocal Components Based on Switched Transmission Lines