Abstract:Kinetic Poppe plots for small retained compounds were calculated in HPLC (using pure acetonitrile) and SFC (using pure carbon dioxide) for columns having twenty one different lengths (between 3 cm and 30 m), operated under strict adiabatic conditions (no heat exchange was allowed between the column and the external environment), with a constant pressure drop of 200 bar. The outlet pressures were set at 1 and 160 bar in HPLC and SFC, respectively. The eluent inlet temperature was set at 312 K. The hold-up time t0 and the apparent column efficiency <N> were calculated by taking into account the longitudinal variations of the eluent pressure, its temperature, density, viscosity, heat capacity, thermal expansion coefficient, equilibrium constant, and diffusion coefficient along the column length. Three different classes of stationary phase were considered: fully porous particles and core-shell particles of different diameter and structure, and silica monolithic columns of the second generation. The reduced plate heights of these stationary phases were taken from experimental data obtained with liquid eluents (acetonitrile/water mixtures). The columns were assumed to be radially homogeneous. The Henry's constant of the compound was fixed at Ka=2.0 at the column inlet. The results demonstrate the potential advantage of using sub-3 μm core-shell particles for fast analysis in both LC and SFC, regardless of the intra-particle diffusivity through the stationary phase. In RPLC conditions, the contribution of surface diffusion to intra-particle diffusivity is important and the 4.6 μm core-shell particles can perform as well as sub-2 μm fully porous particles and silica monolithic columns of the second generation. In the absence of surface diffusion or for localized adsorption onto the stationary phase, sub-2 μm particles and silica monolithic column of the second generation outperform the 4.6 μm core-shell particles because the solid-liquid mass transfer resistance controls the column efficiency at high speeds. Eventually, for the same stationary phase and speed of analysis, SFC methods using pure CO2 may provide at least a twice column efficiency than LC methods using pure acetonitrile. For a constant pressure drop and resolution power, SFC methods may generate four times faster analyses than LC methods. Ultimately, a standard commercial 4.6mm × 50mm long column packed with 2.6 μm core-shell particles, operated with an inlet flow rate of 25 mL/min in fast SFC (200 bar back pressure, 40 °C) may provide a hold-up time of about 1s requiring data acquisition at a frequency of 400 Hz, with a variance of 0.35 μL(2). This performance will require the use of new, ultra-low dispersion SFC system.

Effect of methanol concentration on the speed-resolution properties in adiabatic supercritical fluid chromatography

Effect of density on kinetic performance in supercritical fluid chromatography with methanol modified carbon dioxide

Enhancement Of Solubility Of Troeger'S Base In Supercritical Carbon Dioxide By Methanol

Limit of the speed-resolution properties in adiabatic supercritical fluid chromatography

Supercritical Fluid Chromatography Using Methacrylate-Based Monolithic Column for the Separation of Polar Analytes

Chemometric evaluation of the combined effect of temperature, pressure, and co-solvent fractions on the chiral separation of basic pharmaceuticals using actual vs set operational conditions

Mass transfer kinetic mechanism in monolithic columns and application to the characterization of new research monolithic samples with different average pore sizes

Adsorption mechanisms in normal-phase chromatography. Mobile-phase modifier adsorption from dilute solutions and displacement effect.

Influence of methanol on retention of hydrophobic organic chemicals in soil leaching column chromatography.

Maximizing kinetic performance in supercritical fluid chromatography using state-of-the-art instruments

Viscosity Measurement of CO2–Solvent Mixtures for the Study of the Morphology and Size of Crystalline Particles Obtained Using Supercritical Antisolvent Precipitation

Influences of Critical Solvents on Methanol Desorption and Extraction from Porous Media

Continuous Production of Biodiesel Via Supercritical Methanol Transesterification in a Tubular Reactor. Part 1: Thermophysical and Transitive Properties of Supercritical Methanol

Separation of azeotrope acetone-methanol mixture at high-concentration conditions: Experimental and theoretical perspective of the molecular packing effects in mesopores

Separation of D4t-P-n-pheome Diastereoisomers by Supercritical Fluid Chromatography

Experimental and Kinetic Studies of Soot Formation in Methanol-Gasoline Coflow Diffusion Flames

Effect of solvent properties on the dispersion coefficient in an on-line microwave flow-injection system

Effect of size and polarity of solutes on partial molar volumes and intermolecular interaction in supercritical fluids

The Study on Oxidation Ratio of Methanol with Gas Chromatography

Preparation and Characterization of C16 Monolithic Columns for Capillary Electrochromatography.

[Influence of Organic Modifier on the Retention Behaviour in Soil Leaching Column Chromatography].