Abstract:Rationale: The type and quantity of environmentally problematic disinfection byproducts (DBPs) produced during chlorination of water depend on the natural organic matter and organic contaminants that raw water contains, and on the operational conditions of the drinking water treatment process. There is a need for a fast and quantitative method that determines which DBPs are produced and monitors the chemical dynamics during a drinking water treatment. Methods: A small experimental chemical reactor (50 mL) was mounted directly onto the membrane inlet interface of a membrane inlet mass spectrometer (MIMS). In this setup, the membrane was the only separation between the reaction mixture in the chemical reactor and the open ion source of the mass spectrometer 2 cm away. Water samples to be chlorinated were placed in the reactor and the chlorination reaction was initiated by injection of hypochlorite. The formation of intermediates and products was monitored using either full-scan mass spectra or selected ion monitoring of relevant ions. Results: An algorithm for analyte quantification was successfully developed for analysis of the complex mixtures of phenol (a model for waterborne organic compounds), chlorinated intermediates and trihalomethane products which simultaneously pass the membrane into the mass spectrometer. The algorithm is based upon the combined use of standard addition and an internal standard, and all analytes could be quantified at nanomolar concentrations corresponding to realistic water treatment conditions. Experiments carried out in the temperature range 15-60°C showed that the reaction dynamics change with operational parameters, for example in tap versus deionized water. Conclusions: We have successfully shown that an experimental laboratory reactor directly interfaced with a MIMS can be used for quantitative monitoring of the chemical dynamics during a water treatment. This technique could provide rapid assistance in the optimization of operating parameters for minimizing DBP production.

Quantifying temperature and flow rate effects on the performance of a fixed-bed chromatographic reactor

Practical Teaching of Modeling Tools for Ion-Exchange Chromatography: A Case Study

THE MATHEMATICAL SIMULATION OF AN ETHOXYLATION TUBULAR REACTOR

Modeling and Analysis of New Reactor Concepts for Poly(ethylene Terephthalate) Esterification Process

Modeling of thermal processes in very high pressure liquid chromatography for column immersed in a water bath: Application of the selected models

Cross-flow Heat Transfer in Fixed Bed

An experimental laboratory reactor for quantitative kinetic studies of disinfection byproduct formation using membrane inlet mass spectrometry

Numerical modelling of the operational effects on the thermochemical reactor performance

Experimental Approaches for Understanding Mixing Performance of A Minireactor

Using the reactive/transport dispersive models to simulate a monolithic anion exchanger: Experimental parameter determination, simultaneous model evaluation, and validation

Study on Cross-flow Heat Transfer in Fixed Bed

Reaction Calorimetry in Continuous Flow Mode: A New Approach for the Thermal Characterization of High Energetic and Fast Reactions

Mass-Transfer Limitations for Immobilized Enzyme-Catalyzed Kinetic Resolution of Racemate in A Fixed-Bed Reactor

Numerical Simulation of Thermal Performance for the Reaction Tubes in a Miniaturized Methanol Synthesis Reactor

Understanding flow dynamics in membrane distillation: Effects of reactor design on polarization

Estimating the parameters of competitive Langmuir adsorption isotherms from measured responses to rectangular pulse injections exploiting equilibrium theory

Translating High-Temperature Microwave Chemistry to Scalable Continuous Flow Processes

Chemometric evaluation of the combined effect of temperature, pressure, and co-solvent fractions on the chiral separation of basic pharmaceuticals using actual vs set operational conditions

Cfd Modeling of Methanol to Olefins Process in A Fixed-Bed Reactor

Mixing Performance in T-shape Microchannel at High Flow Rate for Villermaux-Dushman Reaction

Molecular Modelling for Reactor Design