Abstract:From the stripping points, the high intensity proton beam of a compact cyclotron travels through the fringe field area of the machine to the combination magnet. Starting from there the beams with various energy is transferred to the switching magnet for distribution to the beam line targets. In the design of the extraction and transport system for the compact proton cyclotron facilities, such as the 70MeV in France and the 100MeV in China, the space charge effect as the beam crosses the fringe field has not been previously considered; neither has the impact on transverse beam envelope coupled from the longitudinal direction. Those have been concerned much more with the higher beam-power because of the beam loss problem. In this paper, based on the mapping data of 70MeV cyclotron including the fringe field by BEST Cyclotron Inc (BEST) and combination magnet field by China Institute of Atomic Energy (CIAE), the beam extraction and transport are investigated for the 70MeV cyclotron used on the SPES project at Istituto Nazionale di Fisica Nucleare, Laboratori Nazionali di Legnaro (INFN–LNL). The study includes the space charge effect and longitudinal and transverse coupling mentioned above, as well as the matching of beam optics using the beam line for medical isotope production as an example. In addition, the designs of the ±45° switching magnets and the 60° bending magnet for the extracted beam with the energy from 35MeV to 70MeV have been made. Parts of the construction and field measurements of those magnets have been done as well. The current result shows that, the design considers the complexity of the compact cyclotron extraction area and fits the requirements of the extraction and transport for high intensity proton beam, especially at mA intensity levels.

Space charge dominated momentum spread and compensation strategies in the post-linac section of Proton Improvement Plan-II at Fermilab

Final Physics Design of Proton Improvement Plan-II At Fermilab

Optimization of Superconducting Linac for Proton Improvement Plan-II (PIP-II)

Full-Cycle Simulations of the Fermilab Booster

High Intensity Proton Beam Transportation Through Fringe Field of 70 MeV Compact Cyclotron to Beam Line Targets

Optimization of Proton Beam Quality by Obliquely Incident Laser Pre-Pulse

Momentum Cogging at the Fermilab Booster

Quadrupole multiplet for medium energy beam transport for proton improvement plan −2

Proton beam dynamics in bare IOTA with intense space-charge

Physics Opportunities at a Beam Dump Facility at PIP-II at Fermilab and Beyond

Space Charge Driven Emittance Growth and the Effect of Octupoles in IOTA

Early Beam Injection Scheme for the Fermilab Booster: A Path for Intensity Upgrade

A Cost-Effective Upgrade Path for the Fermilab Accelerator Complex

Beam Dynamics Studies at the PIP-II Injector Test Facility

Beam Dynamics Pre-Design with KONUS Principle for the DTL of SPPC P-Linac

Simulation of a cascaded longitudinal space charge amplifier for broadband radiation production using a superconducting linac

A Simulation of the Photoionization of H- Together with the Subsequent Tracking of the Liberated Electrons

An 800-MeV superconducting LINAC to support megawatt proton operations at Fermilab

Optimization of LANSCE Proton Beam Performance for Isotope Production

Design Study of Multi-Charge Low Energy Beams Transport for BISOL Post Accelerator

PIP2-BD: GeV Proton Beam Dump at Fermilab's PIP-II Linac