Development of the X-ray polarimeter using CMOS imager: polarization sensitivity of a $1.5~{\rm μm}$ pixel CMOS sensor

Toshiya Iwata,Kouichi Hagino,Hirokazu Odaka,Tsubasa Tamba,Masahiro Ichihashi,Tatsuaki Kato,Kota Ishiwata,Haruki Kuramoto,Hiroumi Matsuhashi,Shota Arai,Takahiro Minami,Satoshi Takashima,Aya Bamba
2024-05-29
Abstract:We are developing an imaging polarimeter by combining a fine-pixel CMOS image sensor with a coded aperture mask as part of the cipher project, aiming to achieve X-ray polarimetry in the energy range of $10$$\unicode{x2013}$$30~\mathrm{keV}$. A successful proof-of-concept experiment was conducted using a fine-pixel CMOS sensor with a $2.5~\mathrm{\mu m}$ pixel size. In this study, we conducted beam experiments to assess the modulation factor (MF) of the CMOS sensor with a $1.5~\mathrm{\mu m}$ pixel size manufactured by Canon and to determine if there was any improvement in the MF. The measured MF was $8.32\% \pm 0.34\%$ at $10~\mathrm{keV}$ and $16.10\% \pm 0.68\%$ at $22~\mathrm{keV}$, exceeding those of the $2.5~\mathrm{\mu m}$ sensor in the $6$$\unicode{x2013}$$22~\mathrm{keV}$ range. We also evaluated the quantum efficiency of the sensor, inferring a detection layer thickness of $2.67 \pm 0.48~{\rm \mu m}$. To develop a more sensitive polarimeter, a sensor with a thicker detection layer, smaller pixel size, and reduced thermal diffusion effect is desirable.
Instrumentation and Methods for Astrophysics
What problem does this paper attempt to address?
### What problems does this paper attempt to solve? This paper aims to develop an imaging polarimeter for X - ray polarimetry in the 10 - 30 keV energy range. Specifically, the research team combines a fine - pixel CMOS image sensor and a coded aperture mask to achieve this goal. The following are the main problems that the paper attempts to solve: 1. **Improve the Modulation Factor (MF)**: - The modulation factor is an important parameter for measuring the sensitivity of a polarimeter. A sensor with a smaller pixel size can theoretically track photoelectrons more accurately, thus increasing the MF. However, the thermal diffusion effect may erase the information of the initial charge distribution, resulting in a decrease in MF. Therefore, the research team hopes to verify whether the MF can be improved by using a CMOS sensor with a 1.5 µm pixel size. 2. **Evaluate the Quantum Efficiency (QE)**: - Quantum efficiency refers to the ratio of the number of photons detected by the sensor to the number of incident photons. By comparing the count rates of the CMOS sensor and the silicon drift detector (SDD) under different conditions, the research team evaluated the QE of the CMOS sensor and inferred its detection layer thickness. 3. **Explore X - ray polarimetry in the 10 - 30 keV energy range**: - Currently, X - ray polarimetry in the 10 - 30 keV energy range has not been fully explored. This research aims to fill this gap and provide new tools for understanding astrophysical phenomena (such as the space - time curvature around black holes, magnetic field structures, etc.). 4. **Optimize sensor characteristics to improve polarization sensitivity**: - Research shows that in order to develop a more sensitive polarimeter, a sensor with a thicker detection layer, a smaller pixel size, and reduced thermal diffusion effect is required. These improvements will help to improve the sensitivity and accuracy of polarimetry. ### Summary The core problem of the paper is to evaluate and optimize the performance of an X - ray polarimeter based on a fine - pixel CMOS image sensor in the 10 - 30 keV energy range through experiments and simulations, especially the modulation factor and quantum efficiency. This will help to promote the development of X - ray polarimetry technology and provide new means for astronomical research.