Abstract:Acoustic devices offer significant advantages in size and loss, making them ubiquitous for mobile radio frequency signal processing. However, the usable bandwidth is often limited to the achievable electromechanical coupling, setting a hard limit using typical transducer designs. In this work, we present an ultra-wideband transducer design utilizing a tapered electrode configuration to overcome this limitation. The design is realized on a lithium niobate (LN) on silicon carbide platform, utilizing a combination of first and higher order shear-horizontal modes to generate the ultra-wideband response. The implementation shows a fractional bandwidth (FBW) of 55% at 2.23 GHz with an associated insertion loss (IL) of 26 dB for the measured 50 ohm case. Upon improved impedance matching, this performance could be improved to 79% FBW and an IL of 16.5 dB. Upon further development, this ultra-wideband design could be reasonably scaled towards improved FBW and IL trade off to enable improved usability for cases where bandwidth should be prioritized.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is: **How to break through the bandwidth limitations of traditional surface - acoustic - wave (SAW) transducers and achieve ultra - wide - band operation**. ### Problem Background In modern mobile communication systems, acoustic devices (such as surface - acoustic - wave devices) are widely used because of their low loss and compact size. However, the traditional SAW transducer design is limited by the electromechanical coupling coefficient (\(K^2\)) of the material and the selected mode, resulting in a limited available bandwidth. Specifically, the traditional interdigital transducer (IDT) or single - phase unidirectional transducer (SPUDT) designs usually can only cover a relatively narrow frequency band, which limits their performance in applications requiring a broadband response. ### Paper Solution To solve this problem, the author proposes an **ultra - wide - band transducer design based on a tapered electrode configuration**. This design utilizes the platform of lithium niobate (LN) thin films on silicon carbide (SiC) and combines the first - order and higher - order horizontally shear - wave (SH - SAW) modes to generate an ultra - wide - band response. Specific features include: 1. **Tapered electrode design**: By gradually changing the electrode width along the length of the transducer, the transducer can excite sound waves of multiple different wavelengths, thereby significantly expanding the total bandwidth. 2. **Multi - modal excitation**: The transducer can not only excite the fundamental - frequency SH - SAW mode, but also the second - order and third - order SH - SAW modes, further increasing the bandwidth. 3. **Material selection**: The Y - cut LN/SiC structure is selected because it has a high electromechanical coupling coefficient and sound speed, which helps to improve the confinement of sound waves within the thin - film layer and enhance the coupling efficiency. ### Experimental Results The experimental results show that this design achieves a 55% fractional bandwidth (FBW) at a center frequency of 2.23 GHz, with an insertion loss (IL) of 26 dB. After improved impedance matching, the expected performance can be improved to 79% FBW and 16.5 dB IL. ### Application Prospects This ultra - wide - band transducer design is expected to improve the performance of surface - acoustic - wave devices in broadband signal processing, such as in applications for delay lines, optical modulators, and amplifiers, especially when bandwidth needs to be given priority. ### Summary By introducing the tapered electrode configuration, this research has successfully broken through the bandwidth limitations of traditional SAW transducers, demonstrated the potential for ultra - wide - band operation, and provided new ideas for further optimization.

Ultra-Wideband Tapered Transducers in Thin-Film Lithium Niobate on Silicon Carbide

Thin‐Film‐Lithium‐Niobate Photonic Chip for Ultra‐Wideband and High‐Precision Microwave Frequency Measurement

A Compact 2-18Ghz Ultra-Wideband Frequency-conversion T/R Module Based on a 3D Heterogeneous Integrated Process

Research and Fabrication of High-Frequency Broadband and Omnidirectional Transmitting Transducer

High Performance Lithium Niobate Surface Acoustic Wave Transducers in the 4–12 GHz Super High Frequency Range

Design of efficient, broadband single-element (20-80 MHz) ultrasonic transducers for medical imaging applications

Thin-Film Lithium Niobate Acoustic Filter at 23.5 GHz with 2.38 dB IL and 18.2% FBW

38.7 GHz Thin Film Lithium Niobate Acoustic Filter

C-Band Lithium Niobate on Silicon Carbide SAW Resonator With Figure-of-Merit of 124 at 6.5 GHz

Near 30% Fractional Bandwidth Surface Acoustic Wave Filters with Novel Electrode Configuration

Super High Frequency Lithium Niobate Surface Acoustic Wave Transducers Up to 14 Ghz

Double-layer Thin-film LiNbO3 Longitudinally Excited Shear Wave Resonators with Ultra-large Electromechanical Coupling Coefficient and Spurious-Free Performance

Enhancement of Ultrasonic Transducer Bandwidth by Acoustic Impedance Gradient Matching Layer

Design and Simulation of a High Resolution Ultrasonic Micro-Transducer Derived by LiNbO<inf>3</inf>

Ultra-Wideband Surface Acoustic Wave Filters Based on the Cu/LiNbO 3 /sio 2 /sic Structure

A Linbo3 Ultrasonic Phased Array Transducer of More Than 100 Mhz

Bandwidth Improvement Of Linbo3 Ultrasonic Transducers By Half-Concaved Inversion Layer Approach

Transferred Thin Film Lithium Niobate as Millimeter Wave Acoustic Filter Platforms

Layered LiNbO $_{3}$ /At-Quartz Wideband Devices with Inherent Transverse Mode Suppression

Monolithic Integrated Multiband Acoustic Devices on Heterogeneous Substrate for Sub-6 GHz RF-FEMs

Wideband Surface Acoustic Wave Filter at 3.7 GHz With Spurious Mode Mitigation