Abstract:Achieving high-performance perovskite photovoltaics, especially in ambient air relies heavily on optimizing process parameters. However, traditional manual methods often struggle to effectively control the key variables. This inherent challenge requires a paradigm shift toward automated platforms capable of precise and reproducible experiments. Herein, we use a fully automated device acceleration platform (DAP) to optimize the process parameters for preparing full perovskite devices using a two-step method in ambient air. Eight process parameters that have the potential to significantly influence device performance are systematically optimized. Specifically, we delve into the impact of the dispense speed of organic ammonium halide, a parameter that is difficult to control manually, on both perovskite film and device performance. Through the targeted design of experiments, we reveal that the dispense speed significantly affects device performance primarily by adjusting the residual PbI2 content in the films. We find that moderate dispense speeds, e.g., 50 {\mu}l/s, contribute to top-performance devices. Conversely, too fast or too slow speeds result in devices with relatively poorer performance and lower reproducibility. The optimized parameter set enables us to establish a Standard Operation Procedure (SOP) for additive-free perovskite processing under ambient conditions, which yield devices with efficiencies surpassing 23%, satisfactory reproducibility, and state-of-the-art photo-thermal stability. This research underscores the importance of understanding the causality of process parameters in enhancing perovskite photovoltaic performance. Furthermore, our study highlights the pivotal role of automated platforms in discovering innovative workflows and accelerating the development of high-performing perovskite photovoltaic technologies.

What problem does this paper attempt to address?

This paper attempts to address the problem of how to precisely control and optimize manufacturing process parameters when preparing high-efficiency perovskite solar cells in ambient air. Specifically, the researchers utilized a fully automated Device Acceleration Platform (DAP) to systematically optimize the key process parameters for preparing all-perovskite devices, particularly the effect of the drop-casting speed of organic ammonium halides on the performance of perovskite films and devices. Through this study, they aim to overcome the limitations of traditional manual methods in controlling key variables and achieve the preparation of high-efficiency, high-stability, and reproducible perovskite solar cells. ### Main Issues 1. **Limitations of Traditional Manual Methods**: - Traditional manual methods rely on the operator's skill and experience to control key variables, making it difficult to achieve highly reproducible results. - The rapid crystallization dynamics of perovskite materials make it challenging for manual operations to achieve high consistency in large-scale production. 2. **Efficient Preparation in Ambient Air**: - Preparing high-efficiency perovskite solar cells in ambient air can reduce preparation costs, increase production scale, and simplify the preparation process. - Precise control and optimization of process parameters are key to achieving this goal. 3. **Application of Automated Platforms**: - Automated platforms can perform experiments with high precision and repeatability, ensuring the integrity and reliability of the data. - Through automated platforms, researchers can systematically explore and optimize process parameters, accelerating the development of high-efficiency perovskite photovoltaic technology. ### Research Methods - **Device Acceleration Platform (DAP)**: Experiments were conducted using a fully automated platform named SPINBOT. - **One Variable at a Time (OVAT)**: Systematically optimized eight process parameters that could significantly affect device performance. - **Effect of Drop-Casting Speed**: Specifically studied the effect of the drop-casting speed of organic ammonium halides on the performance of perovskite films and devices. ### Main Findings - **Optimal Drop-Casting Speed**: A moderate drop-casting speed (e.g., 50 µl/s) can produce devices with optimal performance, while too fast or too slow speeds result in performance degradation. - **Formation of Non-Perovskite Phases**: A too low drop-casting speed (e.g., below 10 µl/s) may lead to the formation of non-perovskite phases, affecting device performance. - **High Efficiency and Stability**: The optimized parameter set enabled researchers to prepare perovskite devices with efficiencies exceeding 23% and excellent photothermal stability in ambient air. ### Conclusion This study emphasizes the importance of precise control and optimization of process parameters in improving the performance of perovskite devices and demonstrates the critical role of automated platforms in accelerating the development of high-efficiency perovskite photovoltaic technology. Through this research, the researchers not only achieved the preparation of high-efficiency and stable perovskite devices but also provided important references for future large-scale production and practical applications.

Precise Control of Process Parameters for >23% Efficiency Perovskite Solar Cells in Ambient Air Using an Automated Device Acceleration Platform

Tailored Key Parameters of Perovskite for High-Performance Photovoltaics

Optimizing Perovskite Thin‐Film Parameter Spaces with Machine Learning‐Guided Robotic Platform for High‐Performance Perovskite Solar Cells

Air-processed, Large Grain Perovskite Films with Low Trap Density from Perovskite Crystal Engineering for High-Performance Perovskite Solar Cells with Improved Ambient Stability

High Efficiency over 20% of Perovskite Solar Cells by Spray Coating via a Simple Process

Tailoring Precursor Chemistry Enabled Room Temperature‐Processed Perovskite Films in Ambient Air for Efficient and Stable Solar Cells with Improved Reproducibility

Preparation and Optoelectronic Characteristics of Perovskite Module Devices in Air Assisted by Polymer Inner Packaging Layern

New Development on Ambient Fabrication of Efficient and Stable Perovskite Solar Cells

Perovskite ink with wide processing window for scalable high-efficiency solar cells

Achieving Efficient and Stable Perovskite Solar Cells in Ambient Air Through Non‐Halide Engineering

Fast and Controllable Electric-Field-Assisted Reactive Deposited Stable and Annealing-Free Perovskite toward Applicable High-Performance Solar Cells

Vapor-Assisted Crystallization Control Toward High Performance Perovskite Photovoltaics With Over 18% Efficiency In The Ambient Atmosphere

Inhibition of Halide Oxidation and Deprotonation of Organic Cations with Dimethylammonium Formate for Air-Processed P–i–n Perovskite Solar Cells

In Air High-Efficiency and Stable Perovskite Solar Cells Module Assisted by Polymer Internal Encapsulation

Combined Vacuum Evaporation and Solution Process for High‐Efficiency Large‐Area Perovskite Solar Cells with Exceptional Reproducibility

Facile and Scalable Fabrication of Highly Efficient Lead Iodide Perovskite Thin-Film Solar Cells in Air Using Gas Pump Method

Scalable Fabrication of High‐Performance Perovskite Solar Cell Modules by Mediated Vapor Deposition

Proper Annealing Process for a Cost Effective and Superhydrophobic Ambient-Atmosphere Fabricated Perovskite Solar Cell

A pressure process for efficient and stable perovskite solar cells

Air‐Processed Perovskite Films with Inner‐to‐Outside Passivation for High‐Efficiency Solar Cells

Solvent Engineering for Scalable Fabrication of Perovskite/silicon Tandem Solar Cells in Air