Abstract:CONSPECTUS: To tackle the foreseen energy crisis and serious environmental problem caused by conventional energy resources, solar cells, or photovoltaics (PV), a technology that can directly convert sunlight to electricity has been considered to be one of the most important and cost-effective clean energy techniques that benefit the environment. So far, silicon-based PVs have dominated the market due to mature fabrication techniques and their relatively good power conversion efficiency (PCE) and excellent stability. In the past decades, metal halide perovskite PVs have been a major direction of current PV research owing to their intriguing optoelectronic performance. The record PCE of perovskite PV cells has unprecedently increased from an original 3.8 to 25.5%. The typical structure of a photovoltaic perovskite is ABX(3), where A refers to a monovalent cation such as methylammonium (MA(+)), cesium (Cs+), or formamidinium (FA(+)); B refers to a divalent cation such as Pb2+ or Sn2+; and X refers to a halide anion. In general, a perovskite PV device consists of an active layer of the perovskite absorber, which is connected by a hole-transporting layer (HTL) and an electron-transporting layer (ETL). In the beginning, the strategies to improve the PCEs mainly focused on developing an effective method to grow a smooth and continuous polycrystalline film. After the improvement of the baseline PCE of the perovskite PVs, various techniques were employed to reduce the defects of perovskite formed at grain boundaries and surfaces, further pushing the PCEs of perovskite PV devices to over 20%. In the meantime, the discovery of suitable and low-cost interfacial materials such as electron-transporting materials and hole-transporting materials has appealed to the attention of the perovskite research community to accelerate the commercialization of the perovskite PVs. In this Account, we start from our efforts to develop facile and effective fabrication strategies to obtain smooth and continuous polycrystalline perovskite thin films, including vapor-assisted and moisture-assisted perovskite crystal growth. The strategies and the in-depth mechanisms of preventing the formation of specific detrimental defects accumulated at grain boundaries or the surface are also portrayed by designing various passivation molecules with certain functional groups, such as carbonyl groups, amine groups, or sulfonic groups. Some systematically designed electron- or hole-transporting materials to improve the charge extraction and collection efficiency in perovskite PV devices are discussed as well. Finally, future perspectives for further enhancing the long-term stability and PCE are proposed to accelerate the commercialization of perovskite PV devices in the next decade.

New Development on Ambient Fabrication of Efficient and Stable Perovskite Solar Cells

A Prenucleation Strategy For Ambient Fabrication Of Perovskite Solar Cells With High Device Performance Uniformity

Tailored Key Parameters of Perovskite for High-Performance Photovoltaics

Efficient and Stable of Perovskite Solar Cells

Ambient Fabrication of Organic–Inorganic Hybrid Perovskite Solar Cells

Achieving Efficient and Stable Perovskite Solar Cells in Ambient Air Through Non‐Halide Engineering

Ambient Inkjet‐Printed High‐Efficiency Perovskite Solar Cells: Manipulating the Spreading and Crystallization Behaviors of Picoliter Perovskite Droplets

Air-processed, Large Grain Perovskite Films with Low Trap Density from Perovskite Crystal Engineering for High-Performance Perovskite Solar Cells with Improved Ambient Stability

Low-Temperature Atomic Layer Deposition of Metal Oxide Layers for Perovskite Solar Cells with High Efficiency and Stability under Harsh Environmental Conditions

A Heat‐Liquefiable Solid Precursor for Ambient Growth of Perovskites with High Tunability, Performance and Stability

Fast and Controllable Electric-Field-Assisted Reactive Deposited Stable and Annealing-Free Perovskite toward Applicable High-Performance Solar Cells

Improved Air Stability of Perovskite Solar Cells Via Solution-Processed Metal Oxide Transport Layers

Tailoring Precursor Chemistry Enabled Room Temperature‐Processed Perovskite Films in Ambient Air for Efficient and Stable Solar Cells with Improved Reproducibility

High efficiency of 19% for stable perovskite solar cells fabrication under ambient environment using “conductive polymer adhesive”

Anion‐Stabilized Precursor Inks Toward Efficient and Reproducible Air‐Processed Perovskite Solar Cells (Adv. Energy Mater. 13/2024)

Spontaneously supersaturated nucleation strategy for high reproducible and efficient perovskite solar cells

Solvent Engineering for Scalable Fabrication of Perovskite/silicon Tandem Solar Cells in Air

Diffusion Engineering of Ions and Charge Carriers for Stable Efficient Perovskite Solar Cells

One-stone-for-two-birds strategy to attain beyond 25% perovskite solar cells

Current Development toward Commercialization of Metal‐Halide Perovskite Photovoltaics

Efficient and Stable Perovskite Solar Cell with High Open-Circuit Voltage by Dimensional Interface Modification