Separation of biocrude produced from hydrothermal liquefaction of faecal sludge without any solvent

H M Fairooz Adnan,Md Khalekuzzaman,Md. Atik Fayshal,Md. Mehedi Hasan

2024-02-27

Abstract:In this study faecal sludge is used as raw biomass due to its abundance, low cost, and easy availability. After HTL operation, product separation is getting challenging. Current developed studies observed the separation of aqueous and biocrude oil products occurs during the HTL process more popularly with the use of an organic solvent which is quite expensive. Focusing on this critical issue, this study aims to separate the biocrude and aqueous phase without using any solvent by gravity separation technique. From FTIR analysis data it showed that centrifuged at 6000 rpm partial separation of biocrude and aqueous phase (AP) was noticed. however, at 9000 rpm, FTIR analysis showed that biocrude samples included aliphatic hydrocarbons, phenols, and esters where no signs of any carbon chain were found at AP which indicated the products are successfully separated. The separated Crude portion had the higher A-Factor (0.68) and lower C-Factor (0.58) value which indicates the oil quality was immature grade of lower kerogen type II (i.e., moderate oil-prone). This low-cost technique can be economically advantageous for commercial-scale biocrude production.

Signal Processing

What problem does this paper attempt to address?

The main problem that this paper attempts to solve is: to separate biocrude from faecal sludge (FS) treated by hydrothermal liquefaction (HTL) through gravity separation technology without using any organic solvents. Specifically, the research aims to:

1. **Avoid using expensive and environmentally - harmful organic solvents**: Previous studies usually used organic solvents such as dichloromethane (DCM) to separate biocrude and aqueous phases in HTL products. However, these solvents are not only costly but also potentially harmful to the environment. Therefore, this study explored a solvent - free separation method.

2. **Improve separation efficiency and reduce costs**: Experiments were carried out at different rotation speeds (6000 rpm and 9000 rpm) through centrifugal separation technology to determine the optimal separation conditions. The research shows that at 9000 rpm, effective separation of biocrude and aqueous phases can be achieved, and the quality of the separated biocrude is relatively high.

3. **Evaluate the quality and maturity of the separated products**: Fourier - transform infrared spectroscopy (FTIR) was used to analyze the separated biocrude and aqueous phases to confirm their chemical compositions and structures. The results show that the separated biocrude contains components such as long - chain aliphatic hydrocarbons, esters, phenols and alcohols, while no carbon - chain compounds were detected in the aqueous phase, indicating a good separation effect.

4. **Verify the economy and sustainability of the separation method**: The study found that the solvent - free separation method not only reduces costs but also reduces energy consumption and environmental pollution, having significant economic advantages and environmental benefits.

In summary, the core objective of this paper is to develop an economical, efficient and environmentally - friendly biocrude separation technology to promote the resource utilization of faecal sludge and provide new ideas and technical support for solving the global energy crisis and environmental protection.