Catalytic hydrothermal liquefaction of sewage sludge over alumina-based and attapulgite-based heterogeneous catalysts
Gang Wang,Jiaqi Zhang,Jie Yu,Zhe Zhu,Xiangyu Guo,Guanyi Chen,Thomas Pedersen,Lasse Rosendahl,Xiaofeng Yu,Huan Wang
DOI: https://doi.org/10.1016/j.fuel.2022.124329
IF: 7.4
2022-09-01
Fuel
Abstract:In this study, Co/γ-Al2O3, Co-Mo/γ-Al2O3, Co/attapulgite (ATP) and Co-Mo/ATP catalysts were prepared and applied for hydrothermal liquefaction (HTL) of sewage sludge (SS) to produce bio-oil. The properties of the catalysts were characterized by various techniques (N2 physisorption, ICP, XRD and XPS). The mesoporous nature of synthesized catalysts was conformed. Beside, Co2+ and Mo6+ particles were responsible as the major active species for catalytic HTL reactions. The effect of carrier and metal type, loading of catalyst on product yields and composition of bio-oil was studied. The highest bio-oil yield of 31.36 wt% was achieved in the presence of 10 wt% catalyst loading. The main components of bio-oil were phenols, N-containing compounds and hydrocarbons, and the increased selectivity to hydrocarbons with Co-Mo/ATP was observed. Meanwhile, TGA results showed that Co-Mo/ATP increased the low boiling point fraction (<410 °C) of bio-oil to 81.19 wt%. Additionally, catalytic HTL of SS resulted in higher carbon recovery, increasing from 55.61 to 92.24 wt%. Finally, the potential reaction mechanism of the catalysts on HTL of SS was proposed. Overall, this study provides valuable information for bio-oil production from sewage plant and further HTL implementation with ATP based catalyst, improving energy efficiency and alleviating the energy shortage.
energy & fuels,engineering, chemical