Demonstration of nuclear gamma-ray polarimetry based on a multi-layer CdTe Compton Camera

S. Go,Y. Tsuzuki,H. Yoneda,Y. Ichikawa,T. Ikeda,N. Imai,K. Imamura,M. Niikura,D. Nishimura,R. Mizuno,S. Takeda,H. Ueno,S. Watanabe,T. Y. Saito,S. Shimoura,S. Sugawara,A. Takamine,T. Takahashi

DOI: https://doi.org/10.1038/s41598-024-52692-2

2024-02-15

Abstract:To detect and track structural changes in atomic nuclei, the systematic study of nuclear levels with firm spin-parity assignments is important. While linear polarization measurements have been applied to determine the electromagnetic character of gamma-ray transitions, the applicable range is strongly limited due to the low efficiency of the detection system. The multi-layer Cadmium-Telluride (CdTe) Compton camera can be a state-of-the-art gamma-ray polarimeter for nuclear spectroscopy with the high position sensitivity and the detection efficiency. We demonstrated the capability to operate this detector as a reliable gamma-ray polarimeter by using polarized 847-keV gamma rays produced by the $^{56}\rm{Fe}({\it p},{\it p'}\gamma)$ reaction. By combining the experimental data and simulated calculations, the modulation curve for the gamma ray was successfully obtained. A remarkably high polarization sensitivity was achieved, compatible with a reasonable detection efficiency. Based on the obtained results, a possible future gamma-ray polarimetery is discussed.

Instrumentation and Methods for Astrophysics,Nuclear Experiment,Instrumentation and Detectors

What problem does this paper attempt to address?

The problem that this paper attempts to solve is: **Improve the efficiency and sensitivity of gamma - ray polarization measurement in nuclear physics to better study the structural changes and energy - level characteristics of atomic nuclei**.

Specifically, the authors focus on how to achieve more efficient gamma - ray polarization measurement by improving the detection system. Due to the low efficiency of the detection system, the application range of the traditional linear polarization measurement method is greatly limited. For this reason, they developed and tested a Compton camera based on multi - layer CdTe (cadmium telluride) as a new - type gamma - ray polarimeter. This device has high position resolution and relatively high detection efficiency, and can significantly improve the measurement ability of gamma - ray polarization characteristics.

### Key issues
1. **Improve detection efficiency**: The traditional method has deficiencies in detection efficiency, which limits its application range.
2. **Enhance sensitivity**: Higher sensitivity is required to accurately determine the polarization characteristics of gamma - rays.
3. **Expand the application range**: It is hoped that the new detection system can perform effective polarization measurement in a wider range of nuclides.

### Solutions
- **Multi - layer CdTe Compton camera**: Utilize multi - layer CdTe sensors, combined with high position resolution and reasonable energy resolution, to achieve effective detection of sub - MeV gamma - rays.
- **Experimental verification**: By using the 847 keV polarized gamma - rays generated by the \(^{56}\text{Fe}(p,p'\gamma)\) reaction, the ability of this detector as a reliable gamma - ray polarimeter was verified.
- **Data analysis and simulation**: Combining experimental data and simulation calculations, the modulation curve was successfully obtained and significant polarization sensitivity was demonstrated.

### Formulas
Several key formulas mentioned in the article are as follows:

1. **Differential cross - section for Compton scattering**:
\[
\frac{d\sigma}{d\Omega}(\theta, \varphi) = \frac{r_e^2}{2} \left( \frac{E}{E_0} \right)^2 \left[ \frac{E}{E_0 + E} - 2 \sin^2\theta \cos^2\varphi \right]
\]
where \( r_e \) is the classical electron radius, \( E_0/E \) is the energy ratio of the incident photon and the scattered photon, \( \theta \) is the scattering angle, and \( \varphi \) is the angle between the polarization plane of the incident photon and the Compton scattering plane.

2. **Analyzing power**:
\[
\Sigma(\theta, E_\gamma) = \frac{\sin^2\theta}{E'_\gamma / E_\gamma + E_\gamma / E'_\gamma - \sin^2\theta}
\]
where \( E_\gamma \) and \( E'_\gamma \) are the energies of the incident and scattered gamma - rays respectively.

These formulas are used to describe the polarization characteristics of gamma - rays and their scattering behaviors at different angles, providing a theoretical basis for experimental design and data analysis.