Abstract:Solar simulators have been widely used to characterize the performance of solar photovoltaics cells, which typically have a size of 156 × 156 mm2. In order to amplify the testing area, a flexible optimal design method for solar simulators is presented in this study. In this work, 20 quartz tungsten halogen lamps are used with a light filter composed of a mixture of distilled water and cyan ink. The methodology includes the measurements of the irradiance nonuniformities, spectral profile, and explores the effects of light filters on the primary light source used. During this stage, the power source of the lights should be selected, where direct current is usually assumed. As soon as the primary light source is characterized by its corresponding model, a layout is defined by optimizing the nonuniformity of the irradiance. The constructed solar simulator presents a spectral match of 1.69%, a spatial nonuniformity of irradiance of 1.66%, and a temporal instability of irradiance lower than 0.1%. In addition, the current‐voltage curves are compared under indoor and outdoor test showing a root‐mean‐squared error lower than 3%. A class CAA solar simulator is achieved according to the International Electrotechnical Commission and American Society for Testing and Materials standards over an area of 270 × 270 mm2, suitable for testing small size solar photovoltaic modules. A solar simulator based on quartz and tungsten is designed, incorporating a filter composed of a mixture of distilled water and cyan ink. Methodology aspects of design are addressed, considering a characterization of the primary light source to the solar simulator. Proposed solar simulator achieved a Class A in the irradiance non‐uniformity, according to the IEC and ASTM standards.

UV Irradiation Facility for Solar Effects Simulations

Low Energy, High Flux, Uniform and Large Field Size Electron Beam Facility

UV facilities for the investigation of the origin of life

Irradiation Tests for Commercial Off-the Shelf Components with Atmospheric-like Neutrons and Heavy-Ions

A facility for radiation hardness studies based on a medical cyclotron

Novel solid-state solar thermal simulator supplying 30,000 suns by a fibre optical probe

Optimal design and experimental test of a solar simulator for solar photovoltaic modules

Simulation of Combined Environment of Atomic Oxygen and Ultraviolet and Development of Protection Technologies

Characterising and testing deep UV LEDs for use in space applications

A 28 Kw E Multi-Source High-Flux Solar Simulator: Design, Characterization, And Modeling

A 130 kWe solar simulator with tunable ultra-high flux and characterization using direct multiple lamps mapping

Radiation tests of a CubeSat OBC

Radiation Testing of Optical and Semiconductor Components for Radiation-Tolerant LED Luminaires

Preliminary results of the Single Event Effect testing for the ULTRASAT sensors

Description and Characterization of a 114-kWe High-Flux Solar Simulator

Design development and implementation of an irradiation station at the neutron time-of-flight facility at CERN

The vectorial photoelectric effect under solar irradiance and its application to sun sensing

Irradiation study of UV Silicon Photomultipliers for the Mu2e Calorimeter

An Adjustable High‐flux LED Solar Simulator Based on Dome Structure

Simulations for the JEM-EUSO program with ESAF

Ultrahigh Vacuum Cryostat System for Extended Low-Temperature Space Environment Testing