Abstract:In preparation for the forthcoming High-Luminosity phase of the Large Hadron Collider, the ATLAS experiment is working on major upgrades to its detector systems to effectively accommodate the increase in radiation levels and track density. The foremost among these upgrades entails the replacement of the current inner tracking detector with an advanced all-silicon Inner Tracker (ITk). In the outer region of the ITk apparatus is the Strip Detector. Central to the new strip tracking system are the ITk Strip modules, comprising silicon sensors and hybrid Printed Circuit Boards housing the integral read-out Application-Specific Integrated Circuits (ASICs) as well as power distribution services. Thorough characterisation of the electrical characteristics of the silicon strip modules at various stages of the assembly procedure holds paramount significance in evaluating module performance. This rigorous evaluation ensures timely identification of any anomalies, thereby enabling proactive remedial measures. Notably, during the course of these electrical assessments, certain modules manifested breakdown phenomena occurring below the prescribed threshold of 500 V, mandated by the ITk Quality Control protocols. Based on these observations, controlled exposure to low levels of radiation was suspected to elevate the breakdown voltage in susceptible sensors. This contribution presents results from two irradiation campaigns to investigate potentially beneficial effects of irradiation. One study investigates the effects of gamma irradiation on modules showing an early breakdown after gluing. For this study, modules were exposed to an ionising dose of 11 krad (corresponding to the dose accumulated after several days of operation in the HL-LHC) utilising a 60 Co source. The second campaign focuses on silicon sensor test structures with low breakdown voltage due to intentionally caused mechanical defects and their development after exposure to reactor neutrons. In both cases, preliminary findings suggest a discernible improvement in the breakdown voltage.

Radiation Testing of Optical and Semiconductor Components for Radiation-Tolerant LED Luminaires

Radiation Hardening of LED Luminaires for Accelerator Tunnels

Radiation Hardness tests with neutron flux on different Silicon photomultiplier devices

Overview of radiation hardening techniques for IC design

Curing early breakdown in silicon strip sensors with radiation

Optical Transmission Characterization of Fused Silica Materials Irradiated at the CERN Large Hadron Collider

The locality problem for two tastes of staggered fermions

Isothermal annealing of radiation defects in bulk material of diodes from 8" silicon wafers

Radiation Hardness Test of Eljen EJ-500 Optical Cement

Study of the Radiation Hardness of Vcsel and Pin Arrays

Design, fabrication and testing of Al/p-Si Schottky and pn junctions for radiation studies

Radiation hardness studies of AMS HV-CMOS 350 nm prototype chip HVStripV1

A facility for radiation hardness studies based on a medical cyclotron

Irradiation Tests for Commercial Off-the Shelf Components with Atmospheric-like Neutrons and Heavy-Ions

Irradiation Tests and Expected Performance of Readout Electronics of the ATLAS Hadronic Endcap Calorimeter for the HL-LHC

Radiation Hard & High Light Yield Scintillator Search for CMS Phase II Upgrade

ATLAS Pixel Opto-Electronics

Development of Radiation Hard Scintillators

Total Ionizing Dose Effects on a Radiation-Hardened CMOS Image Sensor Demonstrator for ITER Remote Handling

Radiation Damage by Heavy Ions in Silicon and Silicon Carbide Detectors

Radiation Damage in Silicon Detectors Caused by Hadronic and Electromagnetic Irradiation