Abstract:In the upgrade of ATLAS experiment, the front-end electronics components are subjected to a large radiation background. Meanwhile high speed optical links are required for the data transmission between the on-detector and off-detector electronics. The GBT architecture and the Versatile Link (VL) project are designed by CERN to support the 4.8 Gbps line rate bidirectional high-speed data transmission which is called GBT link. In the ATLAS upgrade, besides the link with on-detector, the GBT link is also used between different off-detector systems. The GBTX ASIC is designed for the on-detector front-end, correspondingly for the off-detector electronics, the GBT architecture is implemented in Field Programmable Gate Arrays (FPGA). CERN launches the GBT-FPGA project to provide examples in different types of FPGA. In the ATLAS upgrade framework, the Front-End LInk eXchange (FELIX) system is used to interface the front-end electronics of several ATLAS subsystems. The GBT link is used between them, to transfer the detector data and the timing, trigger, control and monitoring information. The trigger signal distributed in the down-link from FELIX to the front-end requires a fixed and low latency. In this paper, several optimizations on the GBT-FPGA IP core are introduced, to achieve a lower fixed latency. For FELIX, a common firmware will be used to interface different front-ends with support of both GBT modes: the forward error correction mode and the wide mode. The modified GBT-FPGA core has the ability to switch between the GBT modes without FPGA reprogramming. The system clock distribution of the multi-channel FELIX firmware is also discussed in this paper.

JTAG-based Remote Configuration of FPGAs over Optical Fibers

Romote Test System of FPGA based on USB and LVDS

A Front-End Electronics Prototype Based on Gigabit Ethernet for the ATLAS Small-Strip Thin Gap Chamber

Technology research and performance analysis of optical interconnection network based on FPGA

Application of ATCA in trigger and DAQ system for experimental physics

A Back-End Electronics Based on Fiber Communication for Small to Medium-Scale Physics Experiments

The Development of the Global Feature Extractor for the LHC Run-3 Upgrade of the L1 Calorimeter Trigger System

A Fully Fledged TDC Implemented in Field-Programmable Gate Arrays

FPGA-based Fast Track Reconstruction for the Conceptual Design of STCF MDC Trigger

ATCA-based Computation Platform for Data Acquisition and Triggering in Particle Physics Experiments

Trigger Algorithm Development on FPGA-based Compute Nodes

FABLE-DTS: Hardware-Software Co-Design of a Fast and Stable Data Transmission System for FPGAs

A Trigger Inspection Platform for sTGC Detector Front-End Electronic Boards

An FPGA-based Timing and Control System for the Dynamic Compression Sector

FPGA Based High Speed Data Transmission with Optical Fiber in Trigger System of BESIII

Optimization on Fixed Low Latency Implementation of the GBT Core in FPGA

Development of FEB Configuration Test Board for ATLAS NSW Upgrade.

Hardware/software co-design of an ATCA-based computation platform for data acquisition and triggering

Development and data path integration test of the global Feature EXtractor for the ATLAS Level-1 calorimeter trigger system Phase-I upgrade

Design Of Real-Time Measurement For Optical Fiber Positioning Based On Fpga

A multi-channel DAQ system based on FPGA for long-distance transmission in nuclear physics experiments