Abstract:The finite element method (FEM) provides a powerful support for the calculations of superconducting electromagnetic responses. It enables the analysis of large-scale high-temperature superconducting (HTS) systems by the popular H formulation. Nonetheless, modeling of contact resistivity in three-dimensional (3D) FEM is still a matter of interest. The difficulty stems from the large aspect ratio of the contact layer in numerical modeling. Nowadays, an available solution is to model the contact layer with zero thickness but requires the discontinuity conditions of the magnetic field. In this paper, the energy variational method is utilized to incorporate the contribution of contact resistivity into the H formulation. From the perspective of energy transfer, the contact resistivity is related to the energy dissipation of the radial current flowing through the contact interface. In terms of applications, this method can be employed to calculate the charging delay of no-insulation (NI) coils and the current sharing behaviors of CORC cables. One advantage of this model is that the magnetic field is continuous and hence can be easily implemented in FEM. Additionally, it requires fewer degrees of freedom and hence presents advantages in computational efficiency. Moreover, this method can be employed to simplify the 3D H homogeneous model for insulated coils. The above discussions demonstrate that the proposed model is a promising tool for the modeling of contact resistivity.

Considering Capacitive Effects in Foil Winding Homogenization

Homogenization of Foil Windings with Globally Supported Polynomial Shape Functions

Precise General Modeling of Windings for Wireless Power Transfer

Wideband Description of the Finite-Ground Coplanar Waveguide-Type Structures with Discontinuities

Capacitance Extraction of Three-Dimensional Interconnects Using Element-By-Element Finite Element Method (Ebe-Fem) and Preconditioned Conjugate Gradient (pcg) Technique

Electromagnetic-Thermal Characterization Of On On-Chip Coupled (A)Symmetrical Interconnects

A Stabilized Circuit-Consistent Foil Conductor Model

Asymptotic Homogenization and Numerical Implementation to Predict the Effective Mechanical Properties for Electromagnetic Composite Conductor

Homogenization Modeling and Effective Mechanical Constants for Em Composite Conductor with Cooling Channel

Foil Conductor Model for Efficient Simulation of HTS Coils in Large Scale Applications

Current Sharing Analysis and Evaluation of Parallel DC-Link Capacitors in Vehicle Motor Drive

Stepped-shape Field Winding Optimization of a Large Capacity HTS Aircraft Propulsion Machine

Thermal Modeling of an Electrolytic Capacitor Bank

Voltage Distribution Analysis of High Dv/dt Fed Machines Using High Frequency Winding Model

Modeling of contact resistivity and simplification of 3D homogenization strategy for the H formulation

Hysteretic magnetic field analysis with Second-Order homogenization

Effective mechanical properties of EM composite conductors: an analytical and finite element modeling approach

Coupled Simulation of Transient Heat Flow and Electric Currents in Thin Wires: Application to Bond Wires in Microelectronic Chip Packaging

Homogenization Method for Effective Electromagnetic Properties of Composites

Calculation of Current Distribution Inside the Metallized Film Capacitor Element at High Frequency

Heracles: A HfO$\mathrm{_2}$ Ferroelectric Capacitor Compact Model for Efficient Circuit Simulations