Abstract:The main factors that influence the success of observations in the infrared range (central wavelengths of the photometric bands at 3.75 and 4.8~$\mu$m) on the multipurpose optical telescope are considered. Estimates of the sky background brightness are obtained for the Caucasus Mountain Observatory (CMO) of Moscow State University: $1.3\cdot10^6$~photons/(s pixel) in the 3.75~$\mu$m band and $3.4\cdot10^6$~photons/(s pixel) in the 4.8~$\mu$m; and the instrumental background for the 2.5-m CMO telescope at $0^\circ$C: $3.2\cdot10^6$~photons/(s pixel) in the 3.75~$\mu$m band and $4.3\cdot10^6$~photons/(s pixel) in the 4.8~$\mu$m band. It is shown that at this background signal level with the currently available commercial cameras in the $3-5$~$\mu$m spectral range, the telescope-camera coupling capabilities for observing faint objects will still be limited by the thermal background. For different observational conditions, estimates of the limiting magnitudes of objects available for observations in the 3.75 and 4.8~$\mu$m ranges are obtained. For average observation conditions (instrument temperature of $0^\circ$C and stellar image size of 1 arcsec), the limit is $\sim10.6^m$ and $\sim8.4^m$, respectively.

What problem does this paper attempt to address?

### Problems the paper attempts to solve The paper aims to evaluate and determine the influence of the background signal on the observational capabilities when using a commercial mid - infrared (3 - 5 µm) camera for observations on the 2.5 - meter general - purpose optical telescope at the Caucasus Mountain Observatory (CMO). Specifically, the paper mainly focuses on the following issues: 1. **Estimation of background brightness**: - Calculate the sky background brightness and the instrument background brightness, especially the photon fluxes in the 3.75 µm and 4.8 µm bands. - Determine the limitations of these background signals on the ability to observe faint celestial bodies. 2. **Analysis of the sources of background signals**: - Analyze the contributions of the Earth's atmosphere, the telescope structure, and the internal components of the infrared camera to the background signals. - In particular, the influence of thermal background radiation and how it affects the observational effect. 3. **Calculation of the limiting magnitude for observations**: - Calculate the limiting magnitude under different observational conditions according to the background signal level. - Evaluate the influence of different conditions (such as telescope temperature, filter temperature, image quality, etc.) on the observational limit. 4. **Optimization of camera design**: - Propose a simplified design scheme to reduce the instrument background signal while maintaining the cost - effectiveness of the system. - Reduce the influence of reflected radiation by optimizing the positions of the filter and the diaphragm. ### Main conclusions Through a detailed analysis of the background signal, the author draws the following conclusions: - Under the current conditions, when the commercial mid - infrared camera is combined with the 2.5 - meter telescope, the ability to observe faint celestial bodies is still limited by the thermal background. - For the average observational conditions (an instrument temperature of 0°C and a stellar image size of 1 arc second), the limiting magnitude in the 3.75 µm band is approximately magnitude 10.6, and the limiting magnitude in the 4.8 µm band is approximately magnitude 8.4. - In order to improve the observational ability, it is necessary to further optimize the designs of the telescope and the camera, especially to reduce the influence of thermal background radiation. ### Formula summary The key formulas involved in the paper include: - **Photon flux calculation formula**: \[ N_{\text{ph}} = \Omega a^2 \int_{\lambda_1}^{\lambda_2} \frac{\lambda}{hc^2} \frac{1}{\exp\left(\frac{hc}{\lambda kT}\right) - 1} d\lambda \] where $ \Omega $ is the angular area, $ a $ is the pixel linear dimension, $ T $ is the temperature, $ h $ is the Planck constant, $ c $ is the speed of light, and $ k $ is the Boltzmann constant. - **Signal - to - noise ratio formula**: \[ \text{SNR} = \frac{F_0 \cdot 2.512^{-m} \cdot t_p}{\sqrt{F_0 \cdot 2.512^{-m} \cdot t + 2 \left( \left( \frac{a_s}{a_{\text{pix}}} \right)^2 \cdot F_{\text{bg}} \cdot t + \left( \frac{a_s}{a_{\text{pix}}} \right)^2 \cdot \sigma_d^2 / n \right)}} \] where $ t $ is the signal accumulation time, $ F_0 $ is the number of photoelectrons received from a magnitude 0 star, $ m $ is the target magnitude, $ F_{\text{bg}} $ is the number of background photoelectrons, $ a_s $ and $ a_{\text{pix}} $ are the sizes of the stellar image and the pixel respectively, and $ n $ is the number of single frames used to synthesize the final image. Through these studies, the paper provides important reference data and technical suggestions for future mid - infrared observations.

On the Effectiveness of Observations in the Mid-Infrared Wavelength Range on the 2.5-Meter Telescope of the Caucasus Mountain Observatory of Moscow State University with Commercial IR Cameras

New infrared camera of the Caucasian Mountain Observatory of the SAI MSU: design, main parameters, and first light

Transient Double-Beam Spectrograph for the 2.5-m Telescope of the Caucasus Mountain Observatory of SAI MSU

Night-sky brightness and extinction at Mt. Shatdzhatmaz

Detection Limits of Thermal-Infrared Observations with Adaptive Optics: I. Observational Data

Background-Limited Imaging in the Near-Infrared with Warm InGaAs Sensors: Applications for Time-Domain Astronomy

Microwave Receiving System Based on Cryogenic Sensors for the Optical Big Telescope Alt-Azimuth

The night-sky at the Calar Alto Observatory II: The sky at the near infrared

Performance of commercial CMOS cameras for high-speed multicolor photometry

The estimate of sensitivity for large infrared telescopes based on measured sky brightness and atmospheric extinction

Improving mid-infrared thermal background subtraction with Principal Component Analysis

Prospects of observation of gravitationally lensed sources by space submillimeter telescopes

Night Sky Background Analysis for the Cherenkov Telescope Array using the Atmoscope instrument

The Thirty Millimeter Telescope

Simulating Vertical Profiles of Optical Turbulence at the Special Astrophysical Observatory Site

Speckle Interferometry with CMOS Detector

Site-testing at the Muztagh-ata Site.V. Nighttime Cloud Amount during the Last Five Years

Towards a physical understanding of the thermal background in large ground-based telescopes

Thermal Sunyaev-Zeldovich measurements and cosmic infrared background leakage mitigation combining upcoming ground-based telescopes

Analysis of Thermal Conditions of the 6-m BTA Telescope Elements and the Telescope Dome Space

The Infrared Cloud Monitor for the MAGNUM Robotic Telescope at Haleakala