Abstract:The wake topology developing behind a wall-mounted square cylinder in a turbulent boundary layer has been investigated using a high-resolution large-eddy simulation (LES). The boundary-layer thickness at the obstacle location is fixed, the Reynolds number based on the cylinder h and the incoming free-stream velocity $u_\infty$ is 10,000 while the aspect ratio (AR), defined as obstacle height divided by its width, ranges from 1 to 4. The Reynolds stresses, anisotropy-invariant maps (AIM) and the turbulent kinetic energy (TKE) budget are analyzed to investigate the influence of AR on the wake structures and on the turbulence production and transport. In particular, the transition from a dipole configuration for low AR to a quadrupole wake is extensively discussed and examined. The necessity of more data to express this critical AR as a function of the momentum-thickness-based Reynolds number $Re_{\theta}$ is thus highlighted. As an effect of the AR, the wake is deformed in both streamwise and spanwise directions. This contraction of the wake, attributed to the occurrence of the base vortices for the cases AR = 3 and 4, impacts the size of the positive production region that stretches from the roof and the flank of the obstacle to the wake core. The AIMs confirm the wake three-dimensionality and are used to describe the redistribution of the turbulent kinetic energy (TKE) along the three normal directions, in agreement with the literature [A. J. Simonsen and P. Krogstad, Phys. Fluids 17, 088103, (2005)]. The present analysis on the TKE budget displays a stronger turbulence production for the cases AR = 3 and 4, demonstrating the strong influence of the tip and base vortices in generating turbulence at the wall location behind the cylinder.

What problem does this paper attempt to address?

### Problems the paper attempts to solve This paper aims to study the variation of the wake vortex structure of a square cylinder mounted on the wall in a turbulent boundary layer with the aspect ratio (Aspect Ratio, AR). Specifically, the research focuses on the following aspects: 1. **Changes in wake vortex topological structure**: Through high - resolution large - eddy simulation (Large - Eddy Simulation, LES), study the wake vortex topological structure at different aspect ratios, especially the transition process from dipole configuration to quadrupole configuration. 2. **Influence on turbulence generation and transport**: Analyze Reynolds stress, anisotropy - invariant maps (Anisotropy - Invariant Maps, AIM), and turbulent kinetic energy (Turbulent Kinetic Energy, TKE) budgets to explore the influence of aspect ratio on wake vortex structure and turbulence generation and transport. 3. **Determination of critical aspect ratio**: Try to determine a critical aspect ratio (Critical Aspect Ratio, ARc). At this critical value, the wake vortex structure changes from a symmetric dipole configuration to an asymmetric quadrupole configuration. The research also discusses the relationship between this critical value and the momentum - thickness - based Reynolds number (Reθ). 4. **Three - dimensional characteristics of wake vortex structure**: Confirm the three - dimensional characteristics of the wake vortex through AIMs and describe the redistribution of turbulent kinetic energy in three orthogonal directions. ### Main findings - **Influence of aspect ratio on wake vortex structure**: As the aspect ratio increases, the wake vortex structure gradually changes from dipole configuration to quadrupole configuration. In particular, when AR = 3 and 4, the wake vortex structure is significantly deformed, manifested as the appearance of contracted wake vortices and base vortices. - **Enhancement of turbulence generation**: For AR = 3 and 4 cases, due to the presence of tip vortices and base vortices, turbulence generation is significantly enhanced. - **Uncertainty of critical aspect ratio**: The existing data are not sufficient to accurately express the relationship between the critical aspect ratio ARc and the momentum - thickness - based Reynolds number Reθ, and more experimental data are required for further verification. ### Conclusion This research, through high - resolution large - eddy simulation, has explored in detail the influence of aspect ratio on the wake vortex structure of a square cylinder mounted on the wall, especially the changes in turbulence generation and transport. The research results provide an important reference for understanding the turbulence characteristics around buildings in urban environments, which is helpful for optimizing drone path planning and reducing the influence of turbulence during flight.

Aspect-ratio effect on the wake of a wall-mounted square cylinder immersed in a turbulent boundary layer

On the characteristics of the turbulent wake behind a wall-mounted square cylinder

Experimental and numerical investigation of turbulent wake flow around wall-mounted square cylinder of aspect ratio 2

Vortex Separation and Interaction in the Wake of Inclined Trapezoidal Plates

The wake of a wall-mounted rectangular cylinder: Cross-sectional aspect ratio effect

The Dynamics of Cylinder-Wake/boundary-layer Interaction Revealed by Turbulent Transports

Influence of Wall Proximity on Characteristics of Wake Behind a Square Cylinder: PIV Measurements and POD Analysis

Vortex Dynamics and Boundary Layer Transition in Flow Around a Rectangular Cylinder with Different Aspect Ratios at Medium Reynolds Number

Numerical Investigation of Strouhal Number Discontinuity and Flow Characteristics Around Single Rectangular Cylinder at Low Aspect Ratios and Reynolds Numbers

The wake and force statistics of flow past tandem rectangles

Aeroacoustics of a Square Finite-Wall-Mounted Cylinder in Pressure-Gradient Flows

Wake Dynamics of Circular Finite Wall-mounted Cylinders in Different Boundary Layers

Evolution of Lagrangian Coherent Structures in a Cylinder-Wake Disturbed Flat Plate Boundary Layer

Turbulent wake characteristics for a circular cylinder in proximity to a moving wall

Topological description of near-wall flows around a surface-mounted square cylinder at high Reynolds numbers

Effect of inclined angle on a wall-mounted finite-height square cylinder with a passive vertical suction

Water-channel study of flow and turbulence past a two-dimensional array of obstacles

Unsteady large-scale wake structure behind levitated freestream-aligned circular cylinder

Turbulent Transports in the Flow Around a Rectangular Cylinder with Different Aspect Ratios

Turbulent wake of two non-identical-height tandem cantilevered prims: Sheltering effect

Flows over backward-facing steps with different spanwise widths