Topological description of near-wall flows around a surface-mounted square cylinder at high Reynolds numbers

Yong Cao,Tetsuro Tamura,Dai Zhou,Yan Bao,Zhaolong Han

DOI: https://doi.org/10.1017/jfm.2021.1043

IF: 3.7

2021-12-29

Journal of Fluid Mechanics

Abstract:This study topologically describes near-wall flows around a surface-mounted cylinder at a high Reynolds number ( $Re$ ) of $5\times 10^4$ and in a very thick boundary layer, which were partially measured or technically approximated from the literature. For complete and rational flow construction, we use high-resolution simulations and critical-point theory. The large-scale near-wake vortex is composed of two connected segments rolled up from the sides of the cylinder and from the free end. Another large-scale side vortex clearly roots on two notable foci on the lower side wall. In the junction region, the side vortex moves upwards with a curved trajectory, which induces the formation of nodes on the ground surface. In the free-end region, the side vortex is compressed, which results in a smaller trailing-edge vortex and its downstream movement. Only tip vortices are observed in the far wake. The origin of the tip vortices and their distinction from the near-wake vortex are discussed. Further analyses suggest that $Re$ independence should be treated with high caution when $Re$ increases from 500 to ${O}(10^4)$ . The occurrence of upwash flow behind the cylinder strongly depends on the increase in $Re$ , the mechanism of which is also provided. The separation–reattachment process in the junction region and the trailing-edge vortices are discovered only at a high $Re$ . The former should significantly affect the strength of the side vortex in the junction region and the latter should cause a sharp drop in pressure near the trailing edge.

mechanics,physics, fluids & plasmas