Abstract:The scaling characteristic of surface roughness could reveal the fractal property of a surface, which is common for the thin films fabricated via physical vapor deposition. In our previous study, a roughness scaling extraction (RSE) method was proposed to accurately calculate the fractal dimension (D), which is an effective parameter to represent the irregularity and fragmental property of a fractal surface. RSE method was based on a single morphological image of the concerned surface, and was much more accurate than the traditional methods with a low mean relative error of 0.64%. In this study, RSE method was firstly optimized by using the planarization modification on the morphological images of artificial surfaces with ideal dimensions (D-i) ranging from 2.1 to 2.9, which were generated through Weierstrass-Mandelbrot (W-M) function. The calculation accuracy of RSE method could be enhanced by using the second order planarization modification, with a lowest mean relative error of only 0.42% between D-i and the calculated dimensions (D-c). Secondly, artificial surfaces with high resolution and D-i from 2.2 to 2.8 were utilized to investigate the influence of atomic force microscopy (AFM) probe-tip geometry on the calculation accuracy. A typical geometry with a probe-tip radius (r) of 10 nm was employed to carry out the simulation of morphological filtering for the surface images, and the filtered images with various scales (L) from 0.5 mu m to 7.5 mu m were generated. RSE method was found to be robust only when the ratio of L/r was above 400, while a significant deviation occurred at lower ratio values, which would be instructive for the fractal analysis on the AFM images of various surface morphologies.

Sphractal: Estimating the Fractal Dimension of Surfaces Computed from Precise Atomic Coordinates via Box-Counting Algorithm

Sphractal: Estimating the Fractal Dimension of Surfaces Computed from Precise Atomic Coordinates via Box‐Counting Algorithm (Adv. Theory Simul. 6/2024)

Fractal Description of Surface Topography of Ultrathin Au Films

Reconstruction of a fractal rough surface

Volume fractal dimensionality: a useful parameter for measuring the complexity of 3D protein spatial structures.

Research on the Box Counting Algorithm in Fractal Dimension Measurement

Statistical Study of the Bias and Precision for Six Estimation Methods for the Fractal Dimension of Randomly Rough Surfaces

Disk Harmonics for Analysing Curved and Flat Self-affine Rough Surfaces and the Topological Reconstruction of Open Surfaces

BOX DIMENSION OF BILINEAR FRACTAL INTERPOLATION SURFACES

Roughness Scaling Extraction Method for Fractal Dimension Evaluation Based on a Single Morphological Image

Fractal Characteristics of Film Surface

Influences of Planarization Modification and Morphological Filtering by AFM Probe-Tip on the Evaluation Accuracy of Fractal Dimension

Approach to characterize rock fracture surface: Insight from its roughness and fractal dimension

Quantification of the atomic surfaces and volumes of a metal cluster based on the molecular surface model

Computation methods for fractal dimension of surface profile

Fractal Characterisation of Inhomogeneous Rough Surfaces

Enhanced mesoscale and macroscale parameters for accurate 3D shape characterization

Two 3D Fractal-Based Approaches for Topographical Characterization: Richardson Patchwork versus Sdr

Scattering from surface fractals in terms of composing mass fractals

Surface area estimation of digitized 3D objects using quasi-Monte Carlo methods

"Ultima Ratio": Simulating wide-range X-ray scattering and diffraction