Abstract:LaBr3:Ce crystals have good scintillation properties for X-ray spectroscopy. Initially, they were introduced for radiation imaging in medical physics with either a photomultiplier or SiPM readout, and they found extensive applications in homeland security and gamma-ray astronomy. We used 1 inch round LaBr3:Ce crystals to realize compact detectors with the SiPM array readout. The aim was a good energy resolution and a fast time response to detect low-energy X-rays around 100 keV. A natural application was found inside the FAMU experiment, at RIKEN RAL. Its aim is a precise measurement of the proton Zemach radius with impinging muons, to contribute to the solution to the so-called proton radius puzzle. Signals to be detected are characteristic X-rays around 130 KeV. A limit for this type of detector, as compared to the ones with a photomultiplier readout, is its poorer timing characteristics due to the large capacity of the SiPM arrays used. In particular, long signal falltimes are a problem in experiments such as FAMU, where a prompt background component must be separated from a delayed one (after 600 ns) in the signal X-rays to be detected. Dedicated studies were pursued to improve the timing characteristics of the used detectors, starting from hybrid ganging of SiPM cells; then developing a suitable zero pole circuit with a parallel ganging, where an increased overvoltage for the SiPM array was used to compensate for the signal decrease; and finally designing ad hoc electronics to split the 1 inch detector SiPM array into four quadrants, thus reducing the involved capacitances. The aim was to improve the detectors timing characteristics, especially falltime, while keeping a good FWHM energy resolution for low-energy X-ray detection.

The Intrinsic Energy Resolution of LaBr$_3$(Ce) Crystal for GECAM

The Energy Response of LaBr3(Ce), LaBr3(Ce,Sr) and NaI(Tl) Crystals for GECAM

Localisation of gamma-ray interaction points in thick monolithic CeBr3 and LaBr3:Ce scintillators

Characterization of Large Volume 3.5 x 8 inches LaBr3:Ce Detectors

Comparative Characterization Study of a LaBr3(Ce) Scintillation Crystal in Two Surface Wrapping Scenarios: Absorptive and Reflective

The Scintillation properties of Pr 3+ doped and Pr 3+ , Ce 3+ doubly doped LaBr 3

FAST TIMING: LIFETIME MEASUREMENTS WITH LaBr3(Ce) SCINTILLATORS

Study on the scintillation performance of CLLB:Ce scintillator and optimization of measurement method

Crystal Growth and Structural Characterization of Cs2LiLaBr6:Ce Using Neutron Diffraction

Ionization-density-dependent Scintillation Pulse Shape and Mechanism of Luminescence Quenching in LaBr 3 :Ce

Experimental study on gamma ray induced light output deterioration in LaBr3:Ce scintillator

Origin of resolution enhancement by co-doping of scintillators: Insight from electronic structure calculations

Nonproportional response of LaBr3:Ce and LaCl3:Ce scintillators to synchrotron X-ray irradiation

Growth and Scintillation Properties of Cs2LiLa0·1Y0·9Cl6:Ce Crystal

Quantitative Analysis and Efficiency Study of PSD Methods for a LaBr3:Ce Detector

The Rsearch Progress of LaBr 3 : Ce 3+ Scintillator Crystal

Measurement of the non-linearity in the gamma-ray response of the GAGG:Ce inorganic scintillator

The Fundamental Gamma Rays and Charge Particle Interactions of the CeBr3 Scintillator

A Large Area LaBr3/NaI Phoswich for Hard X-ray Astronomy

Performance tests of a large volume cerium tribromide (CeBr3) scintillation detector

Improving the Time Resolution of Large-Area LaBr3:Ce Detectors with SiPM Array Readout