Abstract:As a typical hexagonal close-packed structure metal, the dendritic morphology and preferential orientation of Mg would be influenced by many factors. Current investigations still fall short on the thorough description of the diversity and complexity of dendrites growth patterns and their origination, therefore, this paper reviewed recent research progress of this group on 3D characterization of microstructure in solidified magnesium alloys. Using synchrotron X-ray tomography and phase-field modeling, the formation mechanism of the diverse alpha-Mg (X) dendrites and the affections of alloying element (such as Al, Ca, Zn, and Sn), solute concentration on the growth selection and evolution of alpha-Mg dendrites during solidification were studied. The results indicate that the alloying elements and solute concentration would impose a significant influence on the morphology and orientation selection of the primary alpha-Mg dendrites. In Mg-Ca and Mg-Al (hcp-fcc) alloys, dendrites tend to grow with preferred orientation of <11<(2)over bar>0> or <22<(4)over bar>5> which is in good agreement with the traditional expected direction. The equiaxed growth dendrites in Mg-Sn (hcp-bct) alloys evolve as a structure with 18 branches, six of which grow on the basal plane along <11<(2)over bar>0> and the remaining 12 along <11<(2)over bar>X> (X approximate to 2) off the basal plane. For the case in Mg-Zn alloys, an orientation transition from <11<(2)over bar>0> on the basal plane to <11<(2)over bar>1> off the basal plane are observed with the increasing addition of Zn alloying element, a hyperbranched seaweed structure is also revealed with an interim composition. A probable explanation is that the addition of high anisotropy Zn would slightly alter the anisotropy of interfacial free energy in front of the growth interface which results in a dendrite orientation transition (DOT). These findings partially reveal the underlying formation mechanism and origination of the diversity dendritic morphologies and branching structures of alpha-Mg dendrites in Mg alloys. Furthermore, with the fast X-ray imaging facility, in situ observations of the 3D microstructure evolution in Mg alloys during solidification are also carried out and the evolution of alpha-Mg dendrites are obtained for further analysis.

Morphology evolution of abnormal tertiary dendrite by diffusion- controlled remelting/resolidification in directionally solidified Sn–Mn peritectic alloy

Thermal and Solute Diffusion During Dendrite Growth of Mg-5wt.%Zn Alloy

Dendrite Coarsening in Directionally Solidified Sn–36 At.%ni Peritectic Alloy in the Presence of the Migration of Secondary Dendrite Arms

The Diffusion-Controlled Remelting/resolidification Process in Directionally Solidified Sn-Mn Peritectic Alloy

Secondary Dendrite Arm Migration Caused by Temperature Gradient Zone Melting in the Directionally Solidified Sn–40 At.% Mn Peritectic Alloy

Observation of Dendrite Growth Velocity and Microstructure Transition in Highly Undercooled Single Phase Alloys

Dendritic Solidification of Highly Undercooled Dilute Alloys

Phase-field Simulation of Secondary Dendrite Growth in Directional Solidification of Binary Alloys

Secondary Dendrite Arm Migration Caused by Temperature Gradient Zone Melting During Peritectic Solidification

Phase-field Numerical Simulation of Three-Dimensional Competitive Growth of Dendrites in a Binary Alloy

Phase-field Simulation of Competitive Growth of Grains in a Binary Alloy During Directional Solidification

On the dendrite deformation and evolution mechanism of Ni-based superalloy during directional solidification

Anomalous Α -Mg Dendrite Growth During Directional Solidification of a Mg-Zn Alloy

The Mechanism of Dendrite Formation in a Solid-State Transformation of High Aluminum Fe-Al Alloys

Detachment of Secondary Dendrite Arm in A Directionally Solidified Sn-Ni Peritectic Alloy under Deceleration Growth Condition

Study of Dendrite Growth with Natural Convection in Superalloy Directional Solidification Via a Multiphase-Field-lattice Boltzmann Model

Dendritic to globular morphology transition in ternary alloy solidification

Three-Dimensional Dendritic Morphology and Branching Mechanism in Directionally Solidified Mg-Zn Alloy

Effect of Peritectic Reaction on Dendrite Coarsening in Directionally Solidified Sn–36 At.%ni Alloy

The Morphology and Solute Segregation of Dendrite Growth in Ti-4.5% Al Alloy: A Phase-Field Study

RESEARCH PROGRESS ON 3D DENDRITE MORPHOLOGY AND ORIENTATION SELECTION DURING THE SOLIDIFICATION OF Mg ALLOYS: 3D EXPERIMENTAL CHARACTERIZATION AND PHASE FIELD MODELING