Abstract:Interfacial free energy is a quantitative basis for explaining and predicting interfacial behavior that is ubiquitous in nature. The contact angle (CA) method can determine the surface free energy (γ) as well as Lifshitz-van der Waals (γLW) and Lewis acid/base (γ+/γ-) components of a solid material from its CAs with a set of known test liquids according to the extended Young-Dupré equation. However, the reliability of the "known" parameters of the test liquids is questioned due to the long-neglected surface roughness effect during calibration of the liquids. This study proposed a simple and practicable two-step approach to correct the energy parameters of several test liquids by incorporating Wenzel's surface roughness relationship into CA measurement. Step 1: water and two apolar liquids (diiodomethane and α-bromonaphthalene) were used as benchmarks to calibrate the surface roughness and energy parameters of two reference solids [apolar poly(tetrafluoroethylene) and monopolar poly(methyl methacrylate)], and step 2: the reference solids were used to calibrate any other test liquids by solving the energy parameters from their CAs in the extended Young-Dupré-Wenzel model. Monte Carlo simulation was used to evaluate error transmission and robustness of the model solutions. The obtained energy parameters (γLW/γ+/γ-) of four test liquids (dimethyl sulfoxide, formamide, ethylene glycol, and glycerol) are 28.01/13.68/4.67, 34.95/3.53/37.62, 26.26/7.51/15.74, and 32.99/9.24/26.02 mJ/m2, respectively, and different from the literature values. The liquids were applied to characterize an example solid surface with true γLW/γ+/γ- values of 28.00/1.00/8.00 mJ/m2 and a roughness index (r) of 1.60. Without correction of the liquid parameters, the calculated surface energy, hydration energy, and hydrophobic attraction energy of the solid sample can deviate by 50, 13, and 27%, respectively. This proves the necessity of correcting parameters of the test liquids before they can be used in CA and interfacial energy studies in the presence of surface roughness.

Surface free energies of solid metals: Estimation from liquid surface tension measurements

Calculation of the Surface Energy of Metals: Agreement of the Thermodynamic Vacancy Model with the First-Principles Theory

Surface free energy calculation of the solid–fluid interfaces from molecular simulation

Absolute surface energy determination

Finite-temperature surface elasticity of crystalline solids

Measurement principles for room temperature liquid and fusible metals' surface tension

First-principles calculation of entropy for liquid metals

On estimating the intrinsic surface tension of liquid aluminum and its temperature coefficient

CORRELATION AND CALCULATION OF THE SURFACE TENSION DATA OF MELTING METALLIC SUB STANCES AT SATURATION CONDITIONS

Surface tensions in NaCl-water-air systems from MD simulations

Surface Tension and Its Temperature Coefficient for Liquid Metals

Temperature and oxygen adsorption coupling effects upon the surface tension of liquid metals

Prediction of the surface and interface stress of metallic elements

CORRELATION AND CALCULATION OF THE SURFACE TENSION DATA OF QUANTUM FLUIDS AT LOW TEMPERATURES

Estimating Critical Surface Tension from Droplet Spreading Area

Extended Generic Nature of Surface Entropy

Interfacial thermodynamics of water and six other liquid solvents

Surface tension of liquid metal: role, mechanism and application

Revisiting the Surface Energy Parameters of Standard Test Liquids with a Corrected Contact Angle Method over Rough Surfaces.

Surface Tension Prediction for Pure Fluids

Surface Tension Prediction for Liquid Mixtures