Abstract:High-performance polysilicon (P-Si) is fundamental as a resource for manufacturing semiconductor devices with high photoelectric properties. However, experimentally characterizing the solidification process in detail has been difficult on account of the extremely rapid cooling rate and limited available characterization methods. Therefore, this study used molecular dynamics (MD) to investigate Si crystallization behavior through directional solidification at different cooling rates. The entire system was first analyzed in terms of energy and radial distribution function, after which the microstructural evolution was characterized by visualization. Results indicated that the cooling rate significantly affected the directional solidification of Si, and an excessively high cooling rate resulted in a decrease in the long-range order of the system. At the same cooling rate, the crystallization rates of (1 0 0), (1 1 0), and (1 1 1) crystal faces followed a descending order. The configurations of the S-L interface with different crystal faces were distinct. Specifically, while the atom numbers of defect structures that were formed in systems of (1 0 0) and (1 1 0) crystal faces were few, those formed in the (1 1 1) crystal face were more. It was difficult for the (1 0 0) crystal face to form dislocations regardless of the crystallization degree at different cooling rates, and the (1 1 0) crystal face only formed a few dislocations at high cooling rates. Dislocations formed at all cooling rates during the directional solidification of the (1 1 1) crystal face, and there was a weak correlation between the number of dislocations and cooling rates. Twinning mainly occurred during the solidification process of the (1 1 1) crystal face, and there was no obvious linear relation between its number and the cooling rate. Moreover, when high-energy dislocations occurred more often, the system stability decreased. Overall, this work will be helpful to understand the commonness and difference in directional solidification of Si with different crystal faces at different cooling rates.

Numerical and experimental investigation of the effect of the solid–liquid interface shape on grown-in defects in a silicon single crystal

Atomistic Investigations of Single-Crystal Silicon with Pre-Existing Defects

Numerical Simulation of Directional Solidification Process for the Polycrystalline Silicon Ingot

Impact of Thermal Stress on Intrinsic Point Defect in Czochralski Crystal Growth: Developing a Quantitative Model for Defect Formation and Distribution

Properties of the structural defects during SiC–crystal–induced crystallization on the solid–liquid interface

Interface diagnostics: In-situ determination of crystal-melt interface shape evolutions via probing growth interface electromotive force

In situ observation and numerical analysis of temperature gradient effects on growth velocity during directional solidification of silicon

Numerical Investigation on the Effect of Thermal Gate Moving Rate on Directional Solidification Process

Analysis of Structural Development and Defects during the Anisotropic Growth of Silicon

Optical anisotropy and strain-induced birefringence in dislocation-free silicon single crystals

Grown-in Defects in Heavily Phosphorus-Doped Czochralski Silicon

Study of Effects of Varying Parameters on the Dislocation Density in 200 Mm Sic Bulk Growth

Grown-In Defects in Heavily Boron-Doped Czochralski Silicon

To investigate interface shape and thermal stress during sapphire single crystal growth by the Cz method

(Invited) Defects in Cast-Mono Crystalline Silicon

Fundamental Study of Crystal/melt Interface Shape Change in Czochralski Crystal Growth

Grain Boundary Development of Silicon during Directional Solidification: A Phase-Field Study

Recognition and Imaging of Point Defect Diffusion, Recombination, and Reaction During Growth of Czochralski-Silicon Crystals

Growth of Curved Crystals: Competition Between Topological Defect Nucleation and Boundary Branching.

Faceting Simulation of Bulk Crystal Growth with 2d Nucleation and Screw Dislocation Theory

Advances of interface, flow, and stress control for VB crystal growth: An overview