Abstract:Among high-temperature sorbents, the remarkable stability, low regeneration temperature, and high cyclic sorption capacity of Li4SiO4 sorbent have attracted considerable attention. However, the high cost of lithium sources during the synthesis of Li4SiO4 has restricted its practical application. Meanwhile, the extensive utilization of lithium-ion batteries (LIBs) in renewable energy development has sparked concerns regarding the proper management of numerous discarded LIBs. The successful combination of the recycling of spent LIBs with carbon capture technology using Li4SiO4 sorbent can not only alleviate the waste problem of a large number of LIBs, but also effectively reduce the cost of materials required to capture CO2. Herein, LIBs were utilized to synthesize low-cost Li4SiO4 sorbents for CO2 capture, and the CO2 sorption/desorption performance was evaluated. The optimal regeneration temperatures of Li4SiO4 sorbents from LIBs are generally lower than the traditional regeneration temperature (>700 ℃) because of the existence of Li2SiO3 in fresh Li4SiO4 sorbents from LIBs, thereby reducing the energy consumption of CO2 capture. The results showed that the extraction rate of Li2CO3 increased by 69.92 % and 77.28 % respectively when graphitic carbon (GC) and banana peel activated carbon (BAC) were introduced during the extraction process compared to the absence of reductant. However, Li4SiO4 modified with graphitic carbon (Li4SiO4-GC) shows better cyclic CO2 capture performance than that modified with activated carbon from banana peels (Li4SiO4-BAC). It is found that Li4SiO4-GC could maintain a high sorption of 0.23 g/g after 50 cycles under the conditions of sorption temperature of 525 ℃, desorption temperature of 650 ℃, and 15 vol%CO2, owing to its more diverse variety of crystal phase substances, particularly Li3NaSiO4 crystal phase that plays a positive promoting role in the cyclic sorption/desorption. In addition, Li4SiO4-GC has more developed pore structure after cyclic reactions that other sorbents, which provides more channels for the diffusion of lithium ions, oxygen ions, and sodium ions, making it easier to adsorb more CO2 and increasing the overall reaction rate.

CO2 capture by Li4SiO4 Sorbents: From fundamentals to applications

Unveiling the Porosity Effect of Superbase Ionic Liquid-Modified Carbon Sorbents in CO 2 Capture from Air

In-Situ observation and quantitative analysis on sintering process of Li4SiO4 sorbents

Enhanced high temperature cyclic CO2 capture on Li4SiO4 sorbent from two-dimensional SiO2 nanomeshes

The Carbon Challenge: Design, Synthesis, and Chemisorption Behavior of Solid Sorbents in Direct Air Capture of Carbon Dioxide

Recent Advances in CO2 Capture by Functionalized Ionic Liquids

CO2 capture properties of lithium silicates with different ratios of Li2O/SiO2: an ab initio thermodynamic and experimental approach

The Strategies for Improving Carbon Dioxide Chemisorption by Functionalized Ionic Liquids

Development of sorbent materials for direct air capture of CO2

Efficient carbon dioxide adsorption properties of cellular structure Li 4 SiO 4 sorbents prepared by additive manufacturing based on polymer-derived ceramics strategy

Recent Advances on Kinetics of Carbon Dioxide Capture Using Solid Sorbents at Elevated Temperatures

Advances in Post‐Combustion CO 2 Capture by Physical Adsorption: From Materials Innovation to Separation Practice

Recent Advances of Porous Solids for Ultradilute CO2 Capture

CO2 Capture at Medium to High Temperature Using Solid Oxide-Based Sorbents: Fundamental Aspects, Mechanistic Insights, and Recent Advances.

Molten shell-activated, high-performance, un-doped Li4SiO4 for high-temperature CO2 capture at low CO2 concentrations

Evaluation of the formation and carbon dioxide capture by Li4SiO4 using in situ synchrotron powder X-ray diffraction studies

Synthesis of high-performance Li4SiO4 sorbent for CO2 capture using Li2CO3 extracted from spent lithium batteries

Emerging porous materials for carbon dioxide adsorptive capture: progress and challenges

CO2 capture by Li2CaSiO4 and enhancement with alkali carbonates

State of the art of ionic liquid‐modified adsorbents for CO 2 capture and separation

CO2 high-temperature sorbent (Al, Fe, Ti) CO-doped Li4SiO4 from fly ash-derived SiO2 aerogel: In-situ synthesis, enhanced capture ability and long cycle stability