Abstract:HfO2-based resistive random-access memory (RRAM) with a Ti buffer layer has been extensively studied as an emerging nonvolatile memory (eNVM) candidate because of its excellent resistive switching (RS) properties and CMOS process compatibility. However, a detailed understanding of the nature of Ti thickness-dependent RS and systematic thermal degradation research about the effect of post-metallization annealing (PMA) time on oxygen vacancy distribution and RS performance still needs to be included. Herein, the impact of Ti buffer layer thickness on the RS performance of the Al/Ti/HfO2/TiN devices is first addressed. Consequently, we have proposed a simple strategy to regulate the leakage current, forming voltage, memory window, and uniformity by varying the thickness of the Ti layer. Moreover, it is found that the device with 15 nm Ti shows the minimum cycle-to-cycle variability (CCV) and device-to-device variability (DDV), good retention (105 s at 85 °C), and superior endurance (104). In addition, thermal degradation of the Al/Ti(15 nm)/HfO2/TiN devices under different PMA times at 400 °C is carried out. It is found that the leakage current increases and the forming voltage and memory window decrease with the increase in PMA time due to the thermally activated oxidation of the Ti. However, when the PMA time increases to 30 min, the Ti can no longer capture oxygen from HfO2 due to the formation of self-limited TiOx. Therefore, the device shows superior thermal stability with a PMA time of 90 min at 400 °C and no degradation of the memory window, uniformity, endurance, or retention. This work demonstrates that the Ti/HfO2-based RRAM shows superior back-end-of-line compatibility with high thermal stability up to 400 °C for over an hour.

Uniform and robust TiN/HfO2/Pt memristor through interfacial Al-doping engineering

Ti/HfO2-Based RRAM with Superior Thermal Stability Based on Self-Limited TiOx

Doping Profile Modification Approach of the Optimization of HfO X Based Resistive Switching Device by Inserting AlO X Layer

Interfacial Memristors in Al-Lanio3 Heterostructures

Transparent HfO x -based memristor with robust flexibility and synapse characteristics by interfacial control of oxygen vacancies movement

Uniformity Improvement of Al-doped HfO2 Resistive Switching Memory Devices Using a Novel Diffusion Approach

Improvement of Resistive Switching Uniformity for Tio2-Based Memristive Devices by Introducing A Thin Hfo2 Layer

Effects of Interaction Between Defects on the Uniformity of Doping HfO2-based RRAM: a First Principle Study

Influence of the TiN diffusion barrier on the leakage current and ferroelectricity in an Al-doped HfOx ferroelectric memristor and its application to neuromorphic computing

Impact of Al Alloying/Doping on the Performance Optimization of HfO2-Based RRAM

Modulation of oxygen transport by incorporating Sb 2 Te 3 layer in HfO 2 -based memristor

Tunable ion energy barrier modulation through aliovalent halide doping for reliable and dynamic memristive neuromorphic systems

Multilevel switching in Mg-doped HfO x memristor through the mutual-ion effect

Enhancing Uniformity, Read Voltage Margin, and Retention in Three-Dimensional and Self-Rectifying Vertical Pt/Ta 2 O 5 /Al 2 O 3 /TiN Memristors

Performance Optimization of Atomic Layer Deposited HfO x Memristor by Annealing With Back-End-of-Line Compatibility

Performance Optimization of Atomic Layer Deposited HfOx Memristor by Annealing with Back-End-of-Line Compatibility

Stable resistive switching characteristics from highly ordered Cu/TiO2/Ti nanopore array membrane memristors

Highly Improved Resistive Switching Performances of the Self-Doped Pt/HfO 2 :Cu/cu Devices by Atomic Layer Deposition

Research on Electronic Synaptic Simulation of HfO2-based Memristor by Embedding Al2O3

Enhancing the Uniformity of a Memristor Using a Bilayer Dielectric Structure

Synaptic Plasticity and Learning Behaviors Mimicked in Single Inorganic Synapses of Pt/HfO X /zno X /tin Memristive System