Acoustic absorption and generation in ducts of smoothly varying area sustaining a mean flow and a mean temperature gradient
Saikumar Reddy Yeddula,Renaud Gaudron,Aimee S. Morgans
DOI: https://doi.org/10.1016/j.jsv.2021.116437
2021-09-28
Abstract:In ducts with varying cross-sectional area and sustaining a subsonic non-isentropic mean flow, the axially varying flow conditions affect the acoustic energy balance of the system. This is significant in understanding and controlling thermo-acoustic phenomena, particularly in combustors. This work aims at quantifying the acoustic energy change in such configurations, using the acoustic absorption coefficient, $\Delta$. The acoustic response of the duct to acoustic forcing is determined using an analytical model, neglecting the effect of entropy fluctuations on the acoustic field, and subsequently, $\Delta$ is estimated. The model predictions of $\Delta$ are validated using a linearised Euler equations (LEEs) solver. The model was found to be accurate for Mach numbers below $0.25$, provided the lower frequency limit set by the analytical solution is satisfied. For conically varying area ducts with linear mean temperature gradient, it was observed that $\Delta$ showed very little dependence on frequency, and that the absolute value of $\Delta$ tended to be maximised when the upstream boundary was anechoic rather than non-anechoic. More importantly, $\Delta$ was also observed to show stronger dependence on the mean temperature gradient than area gradient variation for such configurations. Further parametric and optimisation studies for $\Delta$ revealed a crucial finding that a positive mean temperature gradient, representing a heated duct caused acoustic energy absorption. Similarly, a negative mean temperature gradient, representing a cooled duct caused acoustic energy generation -- a key result of this analysis. This behaviour was shown to be consistent with a simplified analysis of the acoustic energy balance. Based on this finding, a linearly proportional reduction in acoustic energy generation was achieved by changing the mean temperature gradient.
Fluid Dynamics