Abstract:Biomass is generally regarded as a significant renewable resource, which can be used as the raw material for bioproducts. In the study, a mixture of rice straw and fermented cow manure was utilized to produce potted seedling trays, which are biodegradable and environmentally friendly. The effects of process parameters on the quality of final products were assessed by measuring damage resistance (DR) and expansion ratio (ER). Single-factor experiments and the response surface methodology (RSM) were used to optimize process parameters, including moisture content, forming pressure, mass percentage of straw (the ratio of rice straw to the mixture), and forming temperature as variables, and DR and ER of potted seedling trays as responses. The results showed that moisture content had the largest effect on DR and ER, followed by forming pressure, forming temperature, and mass percentage of straw. The optimal conditions were identified as a moisture content of 13%, forming pressure of 124 kN, mass percentage of straw equal to 8%, and forming temperature of 132 °C. There was a good agreement between the experimental data and the predicted results, indicating the reliability of the optimization process. Under the optimal conditions, the effectiveness of the regression model was further validated by the desirability of 0.97. Our findings shed new light on the perfect utilization of straws and animal manure and provided a reliable reference for the preparation of potted seedling trays from other types of biomass produced by agriculture.This article has not yet been cited by other publications.
What problem does this paper attempt to address?
The main problem that this paper attempts to solve is to optimize the parameters of seedling - raising pots made from a mixture of straw and fermented cow dung, in order to improve their quality and achieve environmentally - friendly applications. Specifically, the research optimized the key process parameters that affect the final product quality of seedling - raising pots, including moisture content, molding pressure, mass percentage of straw, and molding temperature, through the Response Surface Methodology (RSM), and evaluated the impact of these parameters on the product's Damage Resistance (DR) and Expansion Ratio (ER).
### Main problem decomposition
1. **Resource utilization problems**:
- Straw and animal manure, as important renewable biomass resources, usually contain organic materials such as protein, lignin, cellulose, and hemicellulose. However, these resources cause environmental pollution and safety hazards in traditional treatment methods (such as incineration, discarding, and landfilling).
- A large amount of straw and cow dung produced in China every year has not been effectively utilized, resulting in resource waste and environmental problems.
2. **Product quality problems**:
- The seedling - raising pots currently used in the market are mainly made of plastic, which are not environmentally friendly and have a short service life. In addition, when transplanting, the plastic seedling - raising pots need to remove the seedlings from the holes, which increases the difficulty of mechanized agriculture and limits their large - scale application.
- Therefore, developing efficient and degradable seedling - raising pot materials is of great significance for simplifying the transplanting process and protecting the environment.
3. **Process parameter optimization problems**:
- In order to ensure that the seedling - raising pots made from a mixture of straw and fermented cow dung have good physical properties (such as damage resistance and expansion ratio), it is necessary to optimize the key process parameters.
- Through single - factor experiments and the Response Surface Methodology, the research determined the optimal moisture content, molding pressure, mass percentage of straw, and molding temperature.
### Research objectives
- **Optimize process parameters**: Optimize the moisture content, molding pressure, mass percentage of straw, and molding temperature through the Response Surface Methodology to maximize the damage resistance of seedling - raising pots and minimize the expansion ratio.
- **Improve product quality**: Ensure that the seedling - raising pots made from a mixture of straw and fermented cow dung have good physical properties to meet the actual application requirements.
- **Promote effective resource utilization**: Provide a reliable reference for the effective utilization of straw and animal manure, and promote the rational transformation and reuse of agricultural waste.
### Conclusions
The research results show that the moisture content has the greatest impact on the damage resistance and expansion ratio of seedling - raising pots, followed by molding pressure, molding temperature, and mass percentage of straw. The optimal conditions are: moisture content of 13%, molding pressure of 124 kN, mass percentage of straw of 8%, and molding temperature of 132 °C. Under these conditions, the predicted damage resistance and expansion ratio are 302.5 kN and 2.68% respectively, and the difference from the experimental values is less than 3%. The reliability of the regression model has been verified by an expected value of 0.97.
Through this research, not only new ideas are provided for the effective utilization of straw and animal manure, but also a reliable reference is provided for the preparation of seedling - raising pots from other types of agricultural biomass.