Abstract:Nowadays, thermal energy production from solid fuels as biomass materials focused on the densified biofuels to overcome the disadvantages of raw biomass as irregular shape, low bulk density, and high moisture content. The quality of biomass pellets is sensitive to the pelletization conditions. Consequently, in this work the impact of the operating parameters as applied pressure, die temperature, and moisture content on the physical properties of solid and hollow pellets as pellet length (Lp), normal volume expansion (Vexp, n), initial and relaxed pellet densities (ρp, i and ρp, rel), moisture content of pellet (Mp), water absorption rate (k), and absorption volume expansion (Vexp, ab) of rice straw (RS) pellets was studied. Furthermore, the synergic effect of these parameters on the pellet properties was evaluated at the optimum conditions. The operating parameters were optimized using a multi-objective optimization approach of response surface method (RSM) based on the predicted significant models that describe the physical properties of the pellets. The optimization results showed that high-quality pellets could be produced at a pressure of 72.76 MPa, temperature of 110°C, and moisture of 7.23% for solid pellets and 81.5 MPa, 109°C, and 7.72% for hollow pellets. Significant individual and interaction effects of all independent parameters on the pellets properties were investigated using statistical analysis results, main plot curves, and 2D interaction contour plots. New four significant empirical dimensionless relationships that correlate the properties of pellets were proposed for calculating ρp, rel, Mp, k, and Vexp, ab directly based on other physical and mechanical properties and indirectly based on the operating parameters through the predicted models for different properties. These relationships can be generalized to any type of pellets that are produced under various operating conditions. Hollow pellets are recommended being used in the industrial sector due to their enhanced heat transfer which resulted from the high surface to volume ratio besides their ease of production at normal operating condition similar to that required for solid pellets.

Optimizing selected quality metrics of rice husk briquettes: a response surface methodology approach

Experimental studies on chopping cotton stalk and briquetting process

Modeling and optimization of compaction pressure, binder percentage and retention time in the production process of carbonized sawdust-based biofuel briquettes using response surface methodology (RSM)

Valorization and optimization of Prosopis africana pod and cowpea husk wastes for densified hybrid briquette production

Techno-economic evaluation of energy efficient briquetting system for rice straw and quality of briquettes

Thermogravimetric analysis of agricultural residue carbonized briquettes for domestic and industrial applications

Insight into the Biomass-Based Briquette Generation from Agro-Residues: Challenges, Perspectives, and Innovations

Briquetting process optimization of poultry litter and urban wood waste

Combustion properties improvement and economic evaluation of charcoal briquettes from mixed agricultural waste biomass

Production and characterization of coconut shell charcoal-based bio-briquettes as an alternative energy source for rural communities

Quality assessment of briquettes derived from carbonized cassava peel and sawdust as sustainable domestic sources of energy in Oyo State, Nigeria

Influence of Process Parameters on Optimization of Biochar Fuel Characteristics Derived from Rice Husk: a Promising Alternative Solid Fuel

Optimization of Briquette Fuels by Co-Torrefaction of Residual Biomass and Plastic Waste Using Response Surface Methodology

Optimization and statistical analysis of the effect of main operation conditions on the physical characteristics of solid and hollow cylindrical pellets

Energy potential of biomass from rice husks in bangladesh: An experimental study for thermochemical and physical characterization

Parameter Optimization of a Potted Seedling Tray Prepared from a Mixture of Rice Straw and Fermented Cow Manure Using the Response Surface Methodology

The Influence Of Variations In Soaking Time Of Rice Husk Charcoal Briquettes On Its Performance

Process Optimization of Pellet Manufacturing from Mixed Materials in Ultrasonic Vibration-Assisted Pelleting

Utilization of Pine Fruit and Peanut Shell Wastes into Briquettes as an Alternative Fuel

An Experimental And Response-Surface-Based Optimization Approach Towards Production Of Producer Gas In A Circulating Fluidized Bed Gasifier Using Blends Of Renewable Fibre-Based Biomass Mixtures

An Overview on the Production of Bio-briquettes from Agricultural Wastes: Methods, Processes, and Quality