Abstract:Thin features are integral components of most lightweight cellular lattice structures; however, limited studies are carried out to understand their property/quality aspects. This experimental study investigates the influence of powder feedstock size, feature geometry, and process parameters on the property/quality of thin lightweight features fabricated using a laser powder bed fusion additive manufacturing (L-PBF-AM) system. Three different Ti6Al4V powder feedstocks (fine, medium, and coarse) were utilized, and the dimensions of the features were varied in the range of 0.1 to 0.5 mm. The experimental data were analyzed to gain insights into the powder feedstock-geometry-process-property/quality (PGPP/PGPQ) characteristics, which had not been previously explored but are crucial for designing lightweight structures using L-PBF-AM. The results indicated that both powder feedstock size and feature dimension significantly influenced the properties and quality of the fabricated thin features. Additionally, feature type, volumetric energy density, and their interactions exhibited varying effects on geometrical accuracy, porosity, grain size, and flexural properties. Struts showed lower success rates, grain sizes, and dimensional errors but higher mechanical properties compared to walls. However, both features exhibited similar porosity characteristics. Regarding powder feedstock size, smaller powder sizes were found to be advantageous for fabricating lower-dimensional features and improving their mechanical properties. The feature geometry type also significantly influences the final material properties. A notable observation was that the 0.1 mm wall features exhibited the lowest mechanical properties, particularly in terms of yield strength, while the 0.5 mm strut features exhibited lower mechanical properties among the struts. The findings of the study underscored the importance of understanding the compound relationships between powder feedstock, feature geometry, process parameters, and the resulting properties/quality for lightweight features in L-PBF-AM. Further research is necessary to establish the knowledge and understanding of L-PBF-AM thin features and elucidate the PGPP/PGPQ characteristics in greater detail.

Structure–Property Variations in L-PBF Additively Manufactured Ti6Al4V Parts: Process Control Considerations for Repeatability and Reproducibility in Mission-Critical Part Production

Stability of Ti-6Al-4V Mechanical Properties Across Laser Powder Bed Fusion Vendors and Platforms: Insights on Material Maturity

Process-structure-property Modeling for Postbuild Heat Treatment of Powder Bed Fusion Ti-6Al-4V

Investigation of the Effect of Artificial Internal Defects on the Tensile Behavior of Laser Powder Bed Fusion 17–4 Stainless Steel Samples: Simultaneous Tensile Testing and X-Ray Computed Tomography

Influence of the physicochemical properties of reusable powders on the mechanical properties of Ti6Al4V manufactured via laser powder bed fusion additive manufacturing

In-situ Investigation of the Anisotropic Mechanical Properties of Laser Direct Metal Deposition Ti6Al4V Alloy

Measuring the tensile properties of Ti6Al4V fabricated by laser powder bed fusion: Influence of specimen dimensions

Microstructure Tailoring for High Strength Ti-6Al-4V without Alloying Elements through Optimized Preheating and Post-Heating Laser Scanning in Laser Powder Bed Fusion

Laser powder bed fusion additive manufacturing (LPBF-AM): the influence of design features and LPBF variables on surface topography and effect on fatigue properties

Effect of Particle Size Distribution on the Printing Quality and Tensile Properties of Ti-6Al-4V Alloy Produced by LPBF Process

Laser powder bed fusion additively manufactured thin lightweight Ti6Al4V features: an experimental investigation on the influence of powder feedstock, geometry, and process parameters on property/quality

Mechanical Properties of Ti Grade 2 Manufactured Using Laser Beam Powder Bed Fusion (PBF-LB) with Checkerboard Laser Scanning and In Situ Oxygen Strengthening

Additively manufactured β-Ti5553 with laser powder bed fusion: microstructures and mechanical properties of bulk and lattice parts

Understanding the fatigue behaviour of Ti–6Al–4V manufactured via various additive processes

Innovative Fabrication Design for In Situ Martensite Decomposition and Enhanced Mechanical Properties in Laser Powder Bed Fused Ti6Al4V Alloy

Study on the organization and properties of Ti–6Al–4 V fabricated by laser powder bed fusion based on the thickness of the gradient layer

Research Viewpoint on Performance Enhancement for Very-High-Cycle Fatigue of Ti-6Al-4V Alloys via Laser-Based Powder Bed Fusion

The effects of submerged laser peening, cavitation peening, and shot peening on the improvement of the torsional fatigue strength of powder bed fused Ti6Al4V produced through laser sintering

Unveiling the impact of layerwise laser preheating on microstructure and mechanical response in laser powder bed fusion

Mechanical properties of additively manufactured variable lattice structures of Ti6Al4V

Machining properties of as-built additive manufactured Ti6Al4V titanium alloy through selective laser melting: a comprehensive investigation