Positive situational focusing: Pollyanna or a powerful stress prevention strategy?

B. Lyon

Abstract:

What problem does this paper attempt to address?

The Effect of Slip Distribution on Flow Past a Circular Cylinder

Dandan Li,Shichen Li,Yahui Xue,Yantao Yang,Weidong Su,Zhenhua Xia,Yipeng Shi,Hao Lin,Huiling Duan

DOI: https://doi.org/10.1016/j.jfluidstructs.2014.07.017

IF: 3.482

2014-01-01

Journal of Fluids and Structures

Abstract:A slip boundary has been shown to have a significant impact on flow past bluff bodies. In this work and using a circular cylinder as a model system, the effects of various slip configurations on the passing flow are investigated. A theoretical analysis using matched-asymptotic expansion is first performed in the small-Reynolds number regime following Stokes and Oseen. A slip boundary condition is shown to lead to only higher-order effects (~1/ln(Re)) on the resulting drag coefficient. For higher Reynolds numbers (100–500), the effects of five types of symmetric slip boundary conditions, namely, no slip, fore-side slip, aft-side slip, flank slip, and all slip on the flow field and pertinent parameters are investigated with numerical simulations. Detailed results on the flow structure and force distribution are presented. Flank slip is found to have the best effect for drag reduction with comparable coverage of slip area. For asymmetric slip distributions, torque and lift are found to generally occur.
Charge-dependent slip flow of ionic liquids through the non-uniform microfluidic device: pressure drop and electroviscous effects

Jitendra Dhakar,Ram Prakash Bharti

DOI: https://doi.org/10.1016/j.cep.2022.109041

2022-06-05

Abstract:This work investigates electroviscous effects in presence of charge-dependent slip in steady pressure-driven laminar flow of a symmetric (1:1) electrolyte liquid through a uniformly charged slit contraction - expansion (4:1:4) microfluidic device. The mathematical model comprising Poisson's, Nernst-Planck, Navier-Stokes, and current continuity equations are solved numerically using finite element method (FEM). The flow fields (electrical potential, charge, induced electric field strength, pressure drop, and electroviscous correction factor) have been obtained and presented for a wide range of parameters like inverse Debye length (K=2-20), surface charge density (S=4-16) and slip length ($0\le B_0\le 0.20$) at fixed Schmidt number (Sc=1000) and low Reynolds number (Re=0.01). The flow fields have shown complex dependence on governing parameters. The charge-dependent slip has further enhanced complexity of dependency in comparison to no-slip condition. The total electrical potential ($|\Delta U|$) maximally increases by 78.68%, and pressure drop ($|\Delta P|$) maximally decreases by 63.42%, relative to no-slip flow, over the ranges of conditions. The electroviscous correction factor ($Y=$ ratio of apparent to physical viscosity) increases by 33.58% under the no-slip ($B_0=0$) condition. It ($Y$) increases maximally by 72.10% for charge-dependent slip than in no-slip flow for considered ranges of the conditions. A simple analytical model to estimate the pressure drop in the electroviscous flow has been developed based on the Poiseuille flow in individual uniform sections and pressure loss due to thin orifice. The model overpredicts pressure drop by 2 - 4% from the numerical values. Finally, the predictive relations, depicting the functional dependence of numerical results on governing parameters, are presented for their practical use in design and engineering of microfluidic devices.

Fluid Dynamics
Pressure Modulation of Ion Conductance and Selectivity in Nano-channels with Weakly Overlapping Electrical Double Layers

Xingye Zhang,Xin Zhu,Zhen Cao,Yang Liu

DOI: https://doi.org/10.1109/3M-NANO.2018.8552235

2018-01-01

Abstract:This work numerically investigates the I-V responses of nanofluidic channels under external pressure difference. Poisson-Nernst-Planck-Stokes simulations demonstrate that ion conductance in nano-channels is influenced by the interplay between convective flow and concentration polarization. The extending degree of the ion depletion zone inside the channel is found to be improved at a forward pressure, resulting in a lower ionic conductance and vice versa. Furthermore, the ionic selectivity is increased (or decreased) by a positive (or negative) pressure in comparison with the case driven by electro-osmosis only. All these findings suggest that nano-channel's electrical property can be modulated by external pressures, thus implying potentials in practical nanofluidic applications.
Combined effect of surface charge and boundary slip on pressure-driven flow and convective heat transfer in nanochannels with overlapping electric double layer

Changzheng Li,Zheng Liu,Xuyang Liu,Zhenfei Feng,Xiaobao Mo

DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2021.121353

IF: 5.2

2021-09-01

International Journal of Heat and Mass Transfer

Abstract:The electroviscous effect and convective heat transfer of pressure-driven flow in micro/nanochannels have been widely studied in the past decade. However, previous studies often used constant physical parameters in calculations and overlooked the situation of probable overlapping electric double layers (EDL). In this work, we report the combined effect of concentration-dependent surface charge and surface charge-dependent boundary slip on the flow and related heat transfer in nanochannels with overlapping EDL. The results show that the solution concentration-dependent surface charge and boundary slip apparently affect the electric conductivity and velocity distribution in the nanochannel, subsequently affect the fluidic behavior and heat transfer. The dimensionless flow rate and the Nusselt number (Nu) decrease first and then increase with the increasing solution concentration. Besides, the slip significantly improves the dimensionless flow rate and Nu, especially in small nanochannels with thick overlapping EDL. These results provide useful guidelines for the design and performance optimization of micro/nano fluidic devices.

engineering, mechanical,thermodynamics,mechanics
Analysis of electroviscous effect and heat transfer for flow of non-Newtonian fluids in a microchannel with surface charge-dependent slip at high zeta potentials

Debanjan Banerjee,Sukumar Pati,Pankaj Biswas

DOI: https://doi.org/10.1063/5.0123964

IF: 3.5

2022-10-25

Physics Today

Abstract:Hydrophobic surfaces in pressure-driven flows induce electrokinetic flow retardation, where the slip length decreases due to the surface charge. In the current work, we investigate the thermal transport and fluid flow behavior of a pressure-driven flow of shear-thinning fluid with an electroviscous effect, accounting for the influence of surface charge on the slip. The electrical potential field induced in the electrical double layer (EDL), velocity, streaming potential, and temperature are obtained after solving the Poisson-Boltzmann equation, mass, momentum and energy conservation equations without invoking the Debye-Hückel linearization. Results are presented for a broad range of dimensionless parameters, such as surface charge-independent slip length, Debye-Hückel parameter, zeta potential, heat flux and flow consistency index ( n ). The flow velocity decreases after considering the effect of surface charge on slip and such decrement is more for lower values of n , higher magnitude of zeta potential and thicker EDL. Moreover, for lower values of n , the alteration of the Nusselt number with the surface charge is non-monotonic, whereas, it increases with the surface charge for higher values of n . Further, for lower values of n (1/3) , the Nusselt number enhances by the surface charge effect on the slip, whereas, for higher values of n (1/2) , the trend is the opposite. Also, there is a strong interplay of the rheology of the fluid and EDL thickness in dictating the variation of the Nusselt number.

physics, multidisciplinary
Slip effects on electroosmotic flow in a microchannel with squeezing wall motion

Yasser Aboelkassem

DOI: https://doi.org/10.1063/5.0213353

IF: 4.6

2024-06-01

Physics of Fluids

Abstract:This study investigates the effects of slip boundary conditions on the electroosmotic flow of an electrolyte solution in a microchannel with a squeezing upper wall and a charged lower wall. The mathematical model is derived by utilizing a tight coupling between the nonlinear Poisson–Boltzmann equation and the flow Navier–Stokes equations. An analytical solution to the problem is acquired through the application of lubrication theory, enabling the resolution of the Poisson–Boltzmann equation without resorting to any approximation techniques. The study thoroughly investigates the impact of various electrokinetic parameters, including the Helmholtz–Smoluchowski velocity, wall zeta potential, Debye length, and electric field, on fluid shear stress, pressure distributions, velocity field, and net flow rate. The results demonstrate that the time-averaged net flow rate is significantly influenced by the collective impact of wall slip velocity, Helmholtz–Smoluchowski velocity, zeta potential, and electric double layer. The data clearly show that altering the Helmholtz–Smoluchowski velocity direction can also impact the direction of the net flow rate, regardless of the slip effects. These results further confirm that applying slip boundary conditions to both walls can improve pumping efficiency.

mechanics,physics, fluids & plasmas
Study of a Newtonian Fluid Through Circular Channels with Slip Boundary Taking into Account Electrokinetic Effect

Qian Sun,Yonghong Wu,Lishan Liu,B. Wiwatanapataphee

DOI: https://doi.org/10.1155/2013/718603

2013-01-01

Abstract and Applied Analysis

Abstract:We study the slip flow of fluids driven by the combined effect of electrical force and pressure gradient. The underlying boundary value problem is solved through the use of Fourier series expansion in time and Bessel function in space. The exact solutions and numerical investigations show that the slip length and electrical field parameters have significant effects on the velocity profile. By varying these system parameters, one can achieve smooth velocity profiles or wave form profiles with different wave amplitude and frequency. This opens the way for optimizing the flow by choosing the slip length, the electrical field, and electrolyte solutions.
Alterations in electroosmotic slip velocity: combined effect of viscoelasticity and surface potential undulation

Bimalendu Mahapatra,Aditya Bandopadhyay

DOI: https://doi.org/10.1140/epjs/s11734-022-00756-7

2022-11-19

Abstract:In computational models of microchannel flows, the Helmholtz-Smoluchowski slip velocity boundary condition is often used because it approximates the motion of the electric double layer without resolving the charge density profiles close to the walls while drastically reducing the computational effort needed for the flow model to be solved. Despite working well for straight channel flow of Newtonian fluids, the approximation does not work well for flow involving complex fluids and spatially varying surface potential distribution. To treat these effects using the slip velocity boundary condition, it is necessary to understand how the surface potential and fluid properties affect the slip velocity. The present analysis shows the existence of a modified electroosmotic slip velocity for viscoelastic fluids, which is strongly dependent upon Deborah number and viscosity ratio, and this modification differs significantly from the slip velocity of Newtonian fluids. An augmentation of fluid elasticity results in an asymmetric distribution of slip velocity. Nonintuitively, the modulation wavelength of the imposed surface potential contributes to changing the slip velocity magnitude and adding periodicity to the solution. The proposed electroosmotic slip velocity for viscoelastic fluid can be used in computational models of microchannel flows to approximate the motion of the electric double layer without resolving the charge density profiles close to the walls.

Fluid Dynamics
CFD analysis of electroviscous effects in pressure-driven flow of electrolyte liquid through an asymmetrically charged non-uniform microfluidic device

Jitendra Dhakar,Ram Prakash Bharti

DOI: https://doi.org/10.1016/j.jtice.2023.105230

2023-11-03

Abstract:The electroviscous effects in the pressure-driven flow of electrolyte liquid through an asymmetrically charged contraction-expansion (4:1:4) slit microfluidic device have been investigated numerically. The mathematical model (i.e., Poisson's, Navier-Stokes, and Nernst-Planck equations) is solved using the finite element method to obtain the electrical potential, velocity, pressure, ion concentration fields, excess charge, an induced electric field strength for the following ranges of parameters: Reynolds number (${Re=0.01}$), Schmidt number (${\mathit{Sc}=1000}$), inverse Debye length (${2\le K\le 20}$), top wall surface charge density (${4\le S_t\le 16}$), surface charge ratio (${0\le S_r\le 2}$) and contraction ratio (${d_{\text{c}}=0.25}$). Results show that the charge asymmetry at the different walls of the microfluidic device plays a significant role in the induced electric field development and microfluidic hydrodynamics. The total potential (${|\Delta U|}$) and pressure drop (${|\Delta P|}$) maximally increase by 197.45\% and 25.46\%, respectively, with asymmetry of the charge. {The electroviscous correction factor (ratio of apparent to physical viscosity) maximally increases by 20.85\% (at ${K=2}$, ${S_t=16}$ for ${0\le S_r\le 2}$), 25.46\% (at ${S_t=16}$, ${S_r=2}$ for ${2\le K\le 20}$), and 39.13\% (at ${K=2}$, ${S_r=2}$ for ${0\le S_t\le16}$).} Further, a simpler analytical model is developed to predict the pressure drop in electroviscous flow considering asymmetrically charged surface, based on the Poiseuille flow in the individual uniform sections and pressure losses due to orifice, estimates the pressure drop 1--2\% within the numerical results. The robustness of this model enables the use of present numerical results for design aspects in microfluidic applications.

Fluid Dynamics
Effect of boundary slip on electroosmotic flow in a curved rectangular microchannel

Yong-Bo Liu

DOI: https://doi.org/10.1088/1674-1056/ad3340

2024-03-14

Chinese Physics B

Abstract:The aim of this study is to numerically investigate the impact of boundary slip on electroosmotic flow (EOF) in curved rectangular microchannels. Navier slip boundary conditions were employed at the curved microchannel walls. The electric potential distribution was governed by the Poisson-Boltzmann equation, whereas the velocity distribution was determined by the Navier-Stokes equation. The finite-difference method was employed to solve these two equations. The detailed discussion focuses on the impact of the curvature ratio, electrokinetic width, aspect ratio, and slip length on the velocity. The results indicate that the present problem is strongly dependent on these parameters. The results demonstrate that by varying the dimensionless slip length from 0.001 to 0.01 while maintaining a curvature ratio of 0.5, there is a two-fold increase in the maximum velocity. Moreover, this increase becomes more pronounced at higher curvature ratios. In addition, the velocity difference between the inner and outer radial regions increases with increasing slip length. Therefore, the incorporation of the slip boundary condition results in an augmented velocity and a more non-uniform velocity distribution. The findings presented here offer valuable insights for the design and optimization of EOF performance in curved hydrophobic microchannels featuring rectangular cross-sections.

physics, multidisciplinary
The effect of fluoride and molybdate on caries activity in monkeys (Macaca fascicularis)

W. Bowen

DOI: https://doi.org/10.1038/sj.bdj.4803104

1973-12-04

Abstract:
CFD analysis of electroviscous effects in electrolyte liquid flow through heterogeneously charged uniform microfluidic device

Jitendra Dhakar,Ram Prakash Bharti

2024-08-07

Abstract:This study has numerically investigated the charge-heterogeneity effects in the electroviscous flow of symmetric ($1$:$1$) electrolyte liquid through a uniform slit microfluidic device. The Poisson's, Nernst-Planck (N-P), Navier-Stokes (N-S), and continuity equations are solved using the finite element method (FEM) to obtain the flow fields, such as total electrical potential ($U$), excess charge ($n^\ast$), induced electric field strength ($E_\text{x}$), and pressure ($P$) fields for following conditions: inverse Debye length ($2\le K\le 20$), surface charge density ($4\le \mathit{S_\text{1}}\le 16$), and surface charge-heterogeneity ratio ($0\le \mathit{S_\text{rh}}\le 2$). Results have shown that the total potential ($|\Delta U|$) and pressure ($|\Delta P|$) drop maximally increase by 99.09% (at $K=20$, $\mathit{S_\text{1}}=4$) and 12.77% (at $K=2$, $\mathit{S_\text{1}}=8$), respectively with overall charge-heterogeneity ($0\le \mathit{S_\text{rh}}\le 2$). Electroviscous correction factor (i.e., the ratio of effective to physical viscosity) maximally enhances by 12.77% (at $K=2$, $\mathit{S_\text{1}}=8$), 40.98% (at $\mathit{S_\text{1}}=16$, $\mathit{S_\text{rh}}=1.50$), and 41.35% (at $K=2$, $\mathit{S_\text{rh}}=1.50$), with the variation of $\mathit{S_\text{rh}}$ (from 0 to 2), $K$ (from 20 to 2), and $\mathit{S_\text{1}}$ (from 0 to 16), respectively. Further, a simple pseudo-analytical model is developed to estimate the pressure drop in the electroviscous (EV) flow, accounting for the influence of charge-heterogeneity based on the Poiseuille flow in the uniform channel. This model predicts the pressure drop $\pm$2-4% within the numerical results. The robustness and simplicity of this model enable the present numerical results for engineering and design aspects of microfluidic applications.

Fluid Dynamics
Modelling Slip Flow in Micro/nano Gaps with Moving Boundary

Hui Chen,Xin Fu,Qi Liu

DOI: https://doi.org/10.1016/j.mee.2014.07.027

IF: 2.3

2014-01-01

Microelectronic Engineering

Abstract:The analytical solution models have been constructed to describe the slip flow in the micro/nano gaps with moving boundary, including the case of immersion lithography. The two-dimensional computational fluid dynamics models are established to validate them. The results show that the slip flow varies with time and tends to a steady state quickly. The transient and steady states are investigated respectively to overall describe the slip flow, and there are significant differences between the slip and non-slip flow. Moreover, the stationary liquid on moving wall may be generated when the direction of pressure-driven flow is opposite to the direction of shear flow. This phenomenon is important to prevent liquid leakage during wafer scanning, and the corresponding parameters are optimized to improve the quality of advanced immersion lithography. (C) 2014 Elsevier B.V. All rights reserved.
Liquid Flow Retardation In Nanospaces Due To Electroviscosity: Electrical Double Layer Overlap, Hydrodynamic Slippage, And Ambient Atmospheric Co2 Dissolution

Chih-Chang Chang,Ruey-Jen Yang,Moran Wang,Jiun-Jih Miau,Vadim Lebiga

DOI: https://doi.org/10.1063/1.4732547

IF: 4.6

2012-01-01

Physics of Fluids

Abstract:A theoretical investigation is performed into the electroviscous-induced retardation of liquid flows through finitely long nanochannels or nanotubes with large wells at either end. Given the assumption of equilibrium conditions between the ionic solution in the wells and that within the nanochannel or nanotube, an exact solution is derived for the overlapped electrical double layer (EDL) for the case where the concentrations of the positive and negative ions in the wells may be unequal. The ion concentrations in the wells are determined by the conditions of global electroneutrality and mass conservation. It is shown that the overlapped EDL model proposed by Baldessari and Santiago [J. Colloid Interface Sci. 325, 526 (2008)] is in fact the same as the "thick EDL model" (i.e., the traditional Poisson-Boltzmann model) when the positive and negative ion concentrations in the large enough wells are both equal to the bulk concentration of the salt solution. Utilizing the proposed overlapped EDL analytical model, an investigation is performed to evaluate the effects of hydrodynamic slippage on the flow retardation caused by electroviscosity in nanochannels or nanotubes. Furthermore, exact and approximate solutions are derived for the electroviscosity in ion-selective nanochannels and nanotubes. It is shown that in the absence of slip, the maximum electroviscosity in nanochannels and nanotubes containing a unipolar solution of simple monovalent counter-ions occurs at surface charge densities of h vertical bar sigma vertical bar = 0.32 nm x C/m2 and a vertical bar sigma vertical bar approximate to 0.4 nm x C/m(2), respectively. In addition, it is shown that the electroviscosity in a nanotube is smaller than that in a nanochannel. For example, given a LiCl solution, the maximum electroviscosites in a non-slip nanochannel and non-slip nanotube are eta(a)/eta approximate to 1.6 and 1.47, respectively. For both nanospaces, the electroviscosity is greatly increased when the liquid slip effect is taken into account. Significantly, under slip conditions, the electroviscosity in the nanotube is greater than that in the nanochannel. Finally, an investigation is performed into the effects of ambient atmospheric CO2 dissolution on the electroviscosities of salt/buffer solution and deionized (DI) water in silica nanochannels. The results show that the electroviscosity of CO2-saturated DI water (pH = 5.6) can be reasonably neglected in silica nanochannels with a height of less than 100 nm. (C) 2012 American Institute of Physics. [http://dx.doi.org/10.1063/1.4732547]
Effect of magnetic field and hydrodynamic slippage on electro-osmotic Brinkman flow through patterned zeta potential microchannel

Vishal Chhabra,Chandra Shekhar Nishad,Manoj Sahni,Vineet Kumar Chaurasiya

DOI: https://doi.org/10.1007/s10665-024-10391-x

2024-08-21

Journal of Engineering Mathematics

Abstract:An analytical investigation is conducted to analyze the impact of magnetic field and hydrodynamic slippage on two-dimensional electro-osmotic Brinkman flow in a microchannel with cosine surface zeta potential. The Brinkman equation is utilized to govern the fluid flow within a fully saturated, homogeneous, and isotropic porous medium. We consider a very small magnetic Reynolds number to eliminate the induced magnetic field equation. The Navier slip boundary condition is applied to assess the impact of hydrodynamic slippage. We utilize the Debye–Huckel length approximation to linearize the Poisson–Boltzmann equation, which governs the potential of the electrical double layer. The stream function is obtained analytically, and contour plots, velocity fields, shear stresses, and pressure gradients are assessed to gain a proper understanding of flow physics. We utilize the stream function to plot the streamline plots for distinct assumed flow parameters. We observed that for a fixed Darcy number, the intensity of flow vortices decreases with increasing Hartman number while increasing with increasing slip length. Further, altering the wave number in the assumed cosine-waved zeta potential causes asymmetrical recirculations in the flow, which helps in increasing the scalar mixing process in microdevices. Further, the proposed investigation has various crucial applications, such as microfluidic cooling systems, drug delivery systems, and so on.

engineering, multidisciplinary,mathematics, interdisciplinary applications
Analysis of electroviscous effects in electrolyte liquid flow through heterogeneously charged uniform microfluidic device

Jitendra Dhakar,Ram Prakash Bharti

DOI: https://doi.org/10.1088/1402-4896/ad7231

2024-08-24

Physica Scripta

Abstract:Charge-heterogeneity (i.e., surface charge variation in the axial direction of device) introduces non-uniformity in flow characteristics in the microfluidic device. Thus, it can be used to control practical microfluidic applications, such as mixing, mass, and heat transfer processes. This study has numerically investigated the charge-heterogeneity effects in the electroviscous (EV) flow of symmetric ( : ) electrolyte liquid through a uniform slit microfluidic device. The Poisson's, Nernst-Planck (N-P), Navier-Stokes (N-S), and continuity equations are numerically solved using the finite element method (FEM) to obtain the flow fields, such as total electrical potential (U), excess charge (n*), induced electric field strength (Ex), and pressure ( ) fields for following ranges of governing parameters: inverse Debye length (K = 2 - 20), surface charge density (S1 = 4 - 16), and surface charge-heterogeneity ratio (Srh = 0 - 2). Results have shown that the total potential ( ) and pressure ( ) drop maximally increase by 99.09% (from 0.1413 to 0.2812) (at K=20, S1=4) and 12.77% (from 5.4132 to 6.1045) (at K=2, S1=8), respectively with overall charge-heterogeneity (Srh = 0 - 2). Electroviscous correction factor (Y, i.e., ratio of effective to physical viscosity) maximally enhances by 12.77% (from 1.2040 to 1.3577) (at K=2, S1=8), 40.98% (from 1.4135 to 1.0026) (at S1=16, Srh=1.50), and 41.35% (from 1 to 1.4135) (at K=2, Srh=1.50), with the variation of Srh (from 0 to 2), K (from 20 to 2), and S1 (from 0 to 16), respectively. Further, a simple pseudo-analytical model is developed to estimate the pressure drop in EV flow, accounting for the influence of charge-heterogeneity based on the Poiseuille flow in a uniform channel. This model predicts the pressure drop 2--4% within the numerical results. The robustness and simplicity of this model enable the present numerical results for engineering and design aspects of microfluidic applications.

physics, multidisciplinary
Effects of interface wettability on microscale flow by molecular dynamics simulation

Gyoko Nagayama,Ping Cheng

DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2003.07.013

IF: 5.2

2004-01-01

International Journal of Heat and Mass Transfer

Abstract:Non-equilibrium molecular dynamic simulations have been carried out to study the effect of the interface wettability on the pressure driven flow of a Lennard–Jones (LJ) fluid in a nanochannel. The results show that the hydrodynamic boundary condition at the solid–liquid interface depends on both the interface wettability and the magnitude of the driving force. For a LJ fluid in a nanochannel with hydrophilic surfaces, the velocity profiles have the traditional parabolic shape. The no-slip boundary condition may break down when the driving force exceeds a critical value that overcomes the interfacial resistance. In such a case, the MD results show a pattern of an adsorbing layer sliding along the solid wall. For a LJ fluid in a nanochannel with hydrophobic interfaces, the results show that a gap exists between the liquid and the surface, resulting in almost frictionless resistance; the velocity shows a plug flow profile and the slip length is not constant but depends on the driving force. Furthermore, it is found that the non-uniform temperature and pressure profiles near the solid walls are owing to the effect of interface wettability.

engineering, mechanical,thermodynamics,mechanics
Analytical solution to heat transfer for mixed electroosmotic and pressure-driven flow through a microchannel with slip-dependent zeta potential

Debanjan Banerjee,Sumit Kumar Mehta,Sukumar Pati,Pankaj Biswas

DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2021.121989

IF: 5.2

2021-12-01

International Journal of Heat and Mass Transfer

Abstract:The use of hydrophobic surfaces in electrokinetic flows results in an intricate analysis due to the coupling of surface potential and interfacial slip which challenges their independent measurement. Thus, it becomes significant to consider the slip-dependent surface potential which can decouple the interfacial slip from the zeta potential. In this article, we develop an analytical model to investigate the heat transfer characteristics for combined electroosmotic and pressure-driven flow through a plane microchannel considering the slip-dependent zeta potential. We solve analytically the Poisson–Boltzmann (PB) equation, the mass, momentum and energy conservation equations for hydrodynamically and thermally fully developed flow with appropriate boundary conditions to obtain closed form expressions for the induced potential within the electrical double layer (EDL), the velocity and temperature profiles and the Nusselt number in terms of different physico-chemical parameters. The results reveal that interfacial slip-dependent surface potential has a strong influence on the thermal transport phenomenon along with other parameters, like Joule heating, applied pressure-gradient, electrokinetic parameter, slip length and viscous dissipation. The velocity in the core region is always under-predicted considering the slip-independent surface potential and the under-prediction is amplified for thinner EDL and pure electroosmotic flow. Beyond the critical values of the slip length, the consideration of the slip-independent surface potential in the paradigm of thermal transport dynamics for electrokinetic flows, over-predicts the Nusselt number and the over-prediction is amplified for thinner EDL. Moreover, a critical Brinkman number, Br k is also identified such that for Br Br k. The relative enhancement in Nusselt number due to the interfacial slip increases with the applied pressure-gradient and slip length at smaller values of Brinkman number. Furthermore, the sensitivity of Nusselt number on slip is highly dependent on the Debye parameter, Brinkman number and applied pressure-gradient.
The effect of boundary slippage and nonlinear rheological response on flow of nanoconfined water

Amandeep Sekhon,Ajith VJ,Shivprasad Patil

DOI: https://doi.org/10.1088/1361-648X/aa682c

2017-04-18

Abstract:The flow of water confined to nanometer-sized pores is central to a wide range of subjects from biology to nanofluidic devices. Despite its importance, a clear picture about nanoscale fluid dynamics is yet to emerge. Here we measured dissipation in less than 20 nm thick water films and it was found to decrease for both wetting and non-wetting confining surfaces. The fitting of Carreau-Yasuda model of shear thinning to our measurements implies that flow is non-Newtonian and for wetting surfaces the no-slip boundary condition is valid. On the contrary, for non-wetting surfaces boundary slippage occurs with slip lengths of the order of few nm. The findings suggest that both, the wettability of the confining surfaces and nonlinear rheological response of water molecules under nano-confinement play a dominant role in transport properties.

Soft Condensed Matter
The electroviscous effect in nanochannels with overlapping electric double layers considering the height size effect on surface charge

Changzheng Li,Zheng Liu,Nan Qiao,Zhenfei Feng,Zhi Qun Tian

DOI: https://doi.org/10.1016/j.electacta.2022.140421

IF: 6.6

2022-07-01

Electrochimica Acta

Abstract:The electroviscous effect has been extensively investigated in micro/nano scale ions transport, fluidic flow and heat transfer, etc. Previous researches often used constant surface charge in theoretic calculation and numerical simulations. However, for thick overlapping electric double layer (EDL) nanochannels, the channel height size effect on surface charge cannot be neglected. In this work, we consider the channel height size effect on surface charge to investigate the related ions transport, fluidic flow and heat transfer in nanochannels. The corresponding results show that the deviation considering the height effect or not is significant, especially in the situation of boundary slip. The relative errors of local ionic concentration and potential can reach 50% and 8%, respectively. The maximum relative errors of induced electrical field strength and the ratio of apparent viscosity to fluidic viscosity reach 10% and 9%, respectively, indicating strong height size effect on the fluidic flow. The deviation of Nu is relatively small and almost not affected by the surface charge. These deviations will decrease to zero when the channel height is large enough or the solution concentration is high enough to reach a non-overlapping EDL situation. The results of this work are meaningful to further understand the electroviscous effect in nanochannels, which may provide useful guidelines for the design and performance optimization of nanofluidic devices.

electrochemistry

Positive situational focusing: Pollyanna or a powerful stress prevention strategy?

The Effect of Slip Distribution on Flow Past a Circular Cylinder

Charge-dependent slip flow of ionic liquids through the non-uniform microfluidic device: pressure drop and electroviscous effects

Pressure Modulation of Ion Conductance and Selectivity in Nano-channels with Weakly Overlapping Electrical Double Layers

Combined effect of surface charge and boundary slip on pressure-driven flow and convective heat transfer in nanochannels with overlapping electric double layer

Analysis of electroviscous effect and heat transfer for flow of non-Newtonian fluids in a microchannel with surface charge-dependent slip at high zeta potentials

Slip effects on electroosmotic flow in a microchannel with squeezing wall motion

Study of a Newtonian Fluid Through Circular Channels with Slip Boundary Taking into Account Electrokinetic Effect

Alterations in electroosmotic slip velocity: combined effect of viscoelasticity and surface potential undulation

CFD analysis of electroviscous effects in pressure-driven flow of electrolyte liquid through an asymmetrically charged non-uniform microfluidic device

Effect of boundary slip on electroosmotic flow in a curved rectangular microchannel

The effect of fluoride and molybdate on caries activity in monkeys (Macaca fascicularis)

CFD analysis of electroviscous effects in electrolyte liquid flow through heterogeneously charged uniform microfluidic device

Modelling Slip Flow in Micro/nano Gaps with Moving Boundary

Liquid Flow Retardation In Nanospaces Due To Electroviscosity: Electrical Double Layer Overlap, Hydrodynamic Slippage, And Ambient Atmospheric Co2 Dissolution

Effect of magnetic field and hydrodynamic slippage on electro-osmotic Brinkman flow through patterned zeta potential microchannel

Analysis of electroviscous effects in electrolyte liquid flow through heterogeneously charged uniform microfluidic device

Effects of interface wettability on microscale flow by molecular dynamics simulation

Analytical solution to heat transfer for mixed electroosmotic and pressure-driven flow through a microchannel with slip-dependent zeta potential

The effect of boundary slippage and nonlinear rheological response on flow of nanoconfined water

The electroviscous effect in nanochannels with overlapping electric double layers considering the height size effect on surface charge