Abstract:This paper is the third in the series on the technology development for the EXCEDE (EXoplanetary Circumstellar Environments and Disk Explorer) mission concept, which in 2011 was selected by NASA's Explorer program for technology development (Category III). EXCEDE is a 0.7m space telescope concept designed to achieve raw contrasts of 1e6 at an inner working angle of 1.2 l/D and 1e7 at 2 l/D and beyond. This will allow it to directly detect and spatially resolve low surface brightness circumstellar debris disks as well as image giant planets as close as in the habitable zones of their host stars. In addition to doing fundamental science on debris disks, EXCEDE will also serve as a technological and scientific precursor for any future exo-Earth imaging mission. EXCEDE uses a Starlight Suppression System (SSS) based on the PIAA coronagraph, enabling aggressive performance. We report on our continuing progress of developing the SSS for EXCEDE, and in particular (a) the reconfiguration of our system into a more flight-like layout, with an upstream deformable mirror and an inverse PIAA system, as well as a LOWFS, and (b) testing this system in a vacuum chamber, including IWA, contrast, and stability performance. The results achieved so far are 2.9e-7 contrast between 1.2-2.0 l/D and 9.7e-8 contrast between 2.0-6.0 l/D in monochromatic light; as well as 1.4e-6 between 2.0-6.0 l/D in a 10% band, all with a PIAA coronagraph operating at an inner working angle of 1.2 l/D. This constitutes better contrast than EXCEDE requirements (in those regions) in monochromatic light, and progress towards requirements in broadband light. Even though this technology development is primarily targeted towards EXCEDE, it is also germane to any exoplanet direct imaging space-based telescopes because of the many challenges common to different coronagraph architectures and mission requirements.

Optimization of an Optical Testbed for Characterization of EXCLAIM u-Spec Integrated Spectrometers

Optimization of an Optical Testbed for Characterization of EXCLAIM μ-Spec Integrated Spectrometers

Developing a New Generation of Integrated Micro-Spec Far Infrared Spectrometers for the EXperiment for Cryogenic Large-Aperture Intensity Mapping (EXCLAIM)

μ-Spec Spectrometers for the EXCLAIM Instrument

Optical Design of the EXperiment for Cryogenic Large-Aperture Intensity Mapping (EXCLAIM)

Superfluid-tight cryogenic receiver with continuous sub-Kelvin cooling for EXCLAIM

Overview and status of EXCLAIM, the experiment for cryogenic large-aperture intensity mapping

Design and Optimization of a Spectrometer for High-Resolution SD-OCT

Status of SuperSpec: A Broadband, On-Chip Millimeter-Wave Spectrometer

Precision Projector Laboratory: Detector Characterization with an Astronomical Emulation Testbed

Testing the optical components for the National Ignition Facility time-resolved soft x-ray opacity spectrometer (OpSpecTR)

Geostationary Full-Spectrum Wide-Swath High-Fidelity Imaging Spectrometer: Optical Design and Prototype Development

SCExAO, a testbed for developing high-contrast imaging technologies for ELTs

Optical performance of prototype horn-coupled TES bolometer arrays for SAFARI

Low Noise Titanium Nitride KIDs for SuperSpec: A Millimeter-Wave On-Chip Spectrometer

EXCEDE Technology Development III: First Vacuum Tests

CuRIOS-ED: The Technology Demonstrator for the CubeSats for Rapid Infrared and Optical Surveys Mission

Optical alignment of contamination-sensitive Far-Ultraviolet spectrographs for Aspera SmallSat mission

Performance of a focal plane detector for soft X-ray imaging spectroscopy based on back-illuminated sCMOS

Optimization and Testing of a novel Photoacoustic Spectromicroscopy Cell in the Mid-IR Spectrum

Optical Design and Characterization of an Advanced Computational Imaging System