Abstract:The Yb:fiber based high-power and high-energy ultrafast lasers usually feature central wavelength of 1030 nm instead of the more common one of 1064 nm, thus limiting some potential wavelength-dependent applications. In this work, a hectowatt 1064-nm femtosecond chirped pulse amplification (CPA) system based on double-stage rod-type photonic crystal fiber (PCF) amplifier was demonstrated, with a pulse energy of 212-μJ and a repetition rate of 0.5 MHz. Compared with our previous work [Opt. Express 30(6), 3611, 2022], two key measures were employed. Firstly, a Yb:YAG crystal was intentionally introduced as a spectral filter for avoiding 1030-nm amplified spontaneous emission (ASE) oscillation, which hence improved the signal-to-noise ratio (SNR) by 15 dB. Secondly, an additional stage of rod-type PCF amplifier was adopted for further power scaling, achieving an average power of 127 W. Finally, the pulse was compressed to ∼460 fs, with an average power of 106 W and a compression efficiency of ∼83%. The beam quality factors (M2) were measured to be M2 X = 1.12 and M2 Y = 1.09. To the best of our knowledge, this is the highest pulse energy among 1064-nm hectowatt-level femtosecond lasers, thus providing a high-quality source for wavelength-dependent applications. For example, it can be used as a driver for high-repetition-rate vacuum ultraviolet (VUV) sources about 10.5 eV, with an expected conversion efficiency of up to 1%.

High energy and narrow linewidth N2-filled hollow-core fiber laser at 1.4 μm

Fiber-solid, Hybrid, Single-Frequency Laser (100 W) with a 100 MHz Repetition Rate and 1 Ns Pulse Width from a Spherical Aberration Compensated Four-Stage Nd:YVO4 Amplifier

CO2-based hollow-core fiber Raman laser with high-pulse energy at 1.95 um

High Peak-Power and Narrow-Linewidth All-Fiber Raman Nanosecond Laser in 1.65 Μm Waveband.

High-energy 100-ns single-frequency all-fiber laser at 1064 nm

Efficient high-power 1.9 μm picosecond Raman laser in H 2 -filled hollow-core fiber without generation of rotational lines

Ultraviolet to mid-infrared gas-filled anti-resonant hollow-core fiber lasers

Pulsed fiber laser oscillator at 1.7 µm by stimulated Raman scattering in H2-filled hollow-core photonic crystal fibers

Mid IR hollow core fiber gas laser emitting at 4.6 um

A 1014 Nm Linearly Polarized Low Noise Narrow-Linewidth Single-Frequency Fiber Laser

A 102 W High-Power Linearly-Polarized All-Fiber Single-Frequency Laser at 1560 Nm

2.1 μm, 1.52 μJ square-wave noise-like pulse from an all-fiber figure-of-9 Ho-doped oscillator and single-stage amplifier

Nanosecond pulse pumped, fiber-integrated narrow linewidth linearly polarized Raman amplifier at 1120 nm

Low-Noise Narrow-Linewidth Fiber Laser at 1550 nm (June 2003)

3 W tunable 1.65 μm fiber gas Raman laser in D2-filled hollow-core photonic crystal fibers

A Narrow-Linewidth Linearly Polarized 1018-nm Fiber Source for Pumping Diamond Raman Laser

Watt-level all-fiber 1.7-μm picosecond synchronously pumped Raman laser

A Compact Linearly Polarized Low-Noise Single-Frequency Fiber Laser at 1064 Nm

Tunable fiber gas Raman laser of 6 W at 2.9 μm by deuterium-filled hollow-core fiber

All-Fiber High Repetition Rate Short Pulse Generation Around 1030Nm

Old Wavelength, New Performance: Hectowatt 200-μJ-level Femtosecond fiber CPA System at 1064 Nm