Abstract:This paper introduces a compact picosecond laser system using tapered double cladding fiber-single crystal fiber hybrid amplification technology for the first time. By modifying the Ginzburg-Landau equation, we established a simulation model and designed a passive mode-locked picosecond oscillator based on a semiconductor saturable absorber mirror. The oscillator outputs laser with a pulse width of 7.75 ps, a center wavelength of 1030.55 nm, and a spectrum width of 0.58 nm. The seed laser is stretched and amplified by the all-fiber front stage, and then injected into the tapered double cladding fiber-single crystal fiber hybrid amplifier. The laser power is amplified from 820 mw to 103.1 W, obtaining a gain of 21 dB. We used zero-phonon line pumping technology in single crystal fiber amplifier to reduce the thermal effects caused by quantum loss, thereby increasing the length of the crystal and increasing the power loading capacity. We designed a single crystal fiber amplification module using Yb:YAG with 60 mm long, 1 mm diameter and a 1 at.% doping rate for the first time. Finally a hundred-watt level picosecond laser output with a repetition frequency of 26.33 MHz, an average power of 103.1 W, a pulse width of 244.72 ps, a spectrum width of 1.16 nm, and a beam quality of M2 x = 1.368 and M2 y = 1.511 was obtained. To the best of our knowledge, this is the highest picosecond laser output power for an all-fiber front-stage combined with a single-stage single crystal fiber amplifier.

Watt-level all-fiber 1.7-μm picosecond synchronously pumped Raman laser

589 nm laser generation by frequency doubling of a single-frequency Raman fiber amplifier in PPSLT.

High Peak-Power and Narrow-Linewidth All-Fiber Raman Nanosecond Laser in 1.65 Μm Waveband.

Efficient high-power 1.9 μm picosecond Raman laser in H 2 -filled hollow-core fiber without generation of rotational lines

1.7 µm - 1.73 µm tunable ultrafast Raman fiber laser pumped by 1.6 µm dissipative soliton pulses

Ultrafast Raman fiber laser: a review and prospect

High power Raman soliton generation at 1.7 μm in all-fiber polarization-maintaining erbium-doped amplifier

1.7 Μm - 1.73 Μm Tunable Ultrafast Raman Fiber Laser Pumped by 1.6 Μm Dissipative Soliton Pulses

220 W Raman Fiber Laser at 1.24 Μm Based on Phosphosilicate Fiber

Femtosecond Mode-locked Fiber Laser at 1 Μm Via Optical Microfiber Dispersion Management

Ultrafast Raman fiber Laser with Random Distributed Feedback

Nanosecond pulse pumped, fiber-integrated narrow linewidth linearly polarized Raman amplifier at 1120 nm

High Order Cascaded Raman Random Fiber Laser with High Spectral Purity

Watt-level 2.8 μm ultrashort pulse generation from an all-fiber Er:ZBLAN fiber amplifier

Triple-clad-fiber-based kilowatt-level tunable Raman laser

Pulsed fiber laser oscillator at 1.7 µm by stimulated Raman scattering in H2-filled hollow-core photonic crystal fibers

Self-phase modulation enabled, wavelength-tunable ultrafast fiber laser sources: an energy scalable approach.

All-Fiber Tunable Pulsed 1.7 μm Fiber Lasers Based on Stimulated Raman Scattering of Hydrogen Molecules in Hollow-Core Fibers

High power tunable Raman fiber laser at 1.2 μm waveband

Femtosecond Red and Near-Infrared Lasers Due to Cascaded-Raman-Assisted Four-Wave Mixing in a Nonlinear Yb-Doped Fiber Amplifier

Compact hundred-watt level picosecond laser system based on tapered double cladding fiber-single crystal fiber hybrid amplifier