Abstract:The process-structure-property relationship in Large Area Additive Manufacturing (LAAM) technology is an ongoing area of research as the inherent microstructural properties (chiefly fibers and voids) affect the performance of printed parts. Unfortunately, we currently lack adequate understanding of micro void nucleation and evolution during the LAAM and fused deposition modelling (FDM) processes. Modeling of the polymer melt flow during the extrusion process is important in understanding the underlying microstructural formation and associated properties of the print, that determines the part performance in service conditions. In this paper we compute fiber-induced local pressure fluctuations which may promote void formation in the bead's microstructure. On a macro-scale, we determine flow fields of a purely viscous, Newtonian planar polymer deposition flow through a LAAM nozzle which are utilized on a micro-scale model where we simulate the evolution of a single ellipsoidal fiber along streamlines obtained from the macro-model. On the micro-scale, we determine instantaneous values of the translational and rotational velocities of the rigid ellipsoidal fiber that satisfies a balance of hydrodynamic forces and couples on the fiber's surface based on a Newton Raphson algorithm and we track the fiber's motion along the flow path via an explicit numerical iterative algorithm. Model verification is achieved by benchmarking results with solutions from well-known Jeffery's equation of motion of a particle in homogeneous simple shear flow. We account for rotary diffusivity due to short-range fiber-fiber interaction in the FEA simulation by determining an effective fluid domain size representative of the interaction coefficient of the melt flow through a correlation analysis that yields an equivalent steady state orientation based on the Advani-Tucker equation. We also consider different possible motions of the fiber along individual LAAM flow paths from a given set of random initial fiber conditions to determine pressure bounds on the fiber surface along each streamline. For improved computational efficiency, calculations are carried out with respect to the fiber's local coordinate axes to overcome the rigor of adaptive remeshing during the quasi-transient analysis. Results show low pressure extremes near the fiber's surface which varies across the printed bead as well as through its thickness. Discussion is provided to gain insight into the effect of low-pressure extremes on micro void formation, particularly at the nozzle exit and during die swell/expansion.

Assessing nozzle flow dynamics in Fused Filament Fabrication through the parametric map $α-λ$

Pressure drop non-linearities in material extrusion additive manufacturing: A novel approach for pressure monitoring and numerical modeling

Numerical simulation of filling flow of polymer melt in injection molding

Investigation on the Coalescence of Filaments in Fused Filament Fabrication Process for Amorphous Polyether Ketone Ketone for Varying Nozzle Diameters and Chamber Temperatures

Numerical Simulation and Printability Analysis of Fused Deposition Modeling with Dual-Temperature Control

Real-time polymer flow state monitoring during fused filament fabrication based on acoustic emission

Online Measurement for Parameter Discovery in Fused Filament Fabrication

Simulation of Fiber-Induced Melt Pressure Fluctuations within Large Scale Polymer Composite Deposition Beads

Temperature Analyses in Fused Filament Fabrication: From Filament Entering the Hot-End to the Printed Parts

Fused Deposition Modelling (FDM) of Thermoplastic-Based Filaments: Process and Rheological Properties-An Overview

Deformation of an Amorphous Polymer during the Fused-Filament-Fabrication Method for Additive Manufacturing

Optimal shape design of printing nozzles for extrusion-based additive manufacturing

Finite Difference Modeling and Experimental Investigation of Cyclic Thermal Heating in the Fused Filament Fabrication Process

Processing of Highly Filled Polymer–Metal Feedstocks for Fused Filament Fabrication and the Production of Metallic Implants

Application of Numerical Modeling and Finite Element Analysis in Fused Filament Fabrication: A Review

Effect of particle size on the properties of highly-filled polymers for fused filament fabrication

Experimental and numerical investigations on heat transfer in fused filament fabrication 3D-printed specimens

Analysis of PLA Geometric Properties Processed by FFF Additive Manufacturing: Effects of Process Parameters and Plate-Extruder Precision Motion

Numerical investigation on the viscoelastic polymer flow in material extrusion additive manufacturing

Validation of a Finite Element Model for Fused Filament Fabrication Additive Manufacturing