Abstract:Fujiyabu et al. have experimentally reported that mixing of 3-arm star prepolymers into 4-arm analog improves the toughness of the resultant polymer networks compared to the base network composed of 4-arm star polymers only. For the mechanism of this phenomenon, this study conducted phantom chain simulations for polymer networks composed of mixtures of star branch prepolymers with equal arm length and different arm numbers, (f_1,f_2 )=(3,4), (3,6) and (3,8), for various f_1=3 prepolymer fractions {\phi}_3. The networks were created via end-linking reactions between prepolymers traced by a Brownian dynamics scheme, and the network structure was stored at different conversion ratios {\phi}_c, ranging from 0.6 and 0.9. The cycle rank of the gelated networks {\xi} is fully consistent with the mean field theory, demonstrating that the examined network structure is statistically fair. The networks were stretched with energy minimization until the break, and fracture characteristics including strain at break {\epsilon}_b, stress at break {\sigma}_b, work for fracture W_b, and the ratio of broken strands {\phi}_bb, were obtained. {\epsilon}_b, {\sigma}_b/{\phi}_bb, and W_b/{\phi}_bb data plotted against {\xi} roughly follow the master curves reported for the base networks without mixing, implying that the change of fracture properties by the mixing of f_1=3 mainly corresponds to a decrease of {\xi}. The mixing slightly suppresses {\sigma}_b/{\phi}_bb and W_b/{\phi}_bb for large f_2 cases compared to the base networks because of a biased breakage at the network strands without extenders, which are prepolymers with only two reacted arms. The analysis for broken strands exhibited a new master curve for the {\xi}-dependence of the molecular weight of broken strands.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to explore the influence of star - polymer mixtures with different functionality degrees (i.e., the number of arms at the branch point, denoted as \( f \)) on the fracture properties of polymer networks. Specifically, the author studied the fracture characteristics of mixtures composed of star - prepolymers with different functionality degrees (such as \( f_1 = 3 \) and \( f_2 = 4, 6, 8 \)) under different proportions \( \varphi_3 \) of \( f_1 = 3 \) prepolymers and cross - linking reaction conversion rates \( \varphi_g \) through simulation. ### Main problems: 1. **Changes in fracture properties**: Study how mixing star - prepolymers with different functionality degrees affects the fracture properties of polymer networks, especially the fracture strain \( \varepsilon_b \), fracture stress \( \sigma_b \), fracture energy \( W_b \) and the proportion of broken chains \( \varphi_{bb} \). 2. **Mechanism analysis**: Explore the mechanisms behind these changes, especially how mixing prepolymers with different functionality degrees affects the network structure and fracture behavior. ### Research background: - **Experimental observations**: Fujiyabu et al. experimentally found that mixing 3 - arm star prepolymers into 4 - arm star prepolymers can significantly improve the toughness of polymer networks. - **Theoretical predictions**: Previous studies have shown that multi - functional nodes (i.e., \( f>4 \)) can generally improve the robustness of the network, but at high conversion rates, networks with low functionality degrees may perform better. - **Simulation verification**: Verify the experimental results and explore the mechanisms behind them through simulation studies. ### Simulation methods: - **Model establishment**: Use the phantom chain simulation method to simulate the cross - linking reaction of star - prepolymers through the Brownian dynamics scheme to generate polymer networks. - **Parameter setting**: The network structure and fracture characteristics under different proportions \( \varphi_3 \) of \( f_1 = 3 \) prepolymers and cross - linking reaction conversion rates \( \varphi_g \) were studied. - **Data processing**: Obtain the fracture characteristics of the network through energy minimization and step - by - step uniaxial tensile simulation, and analyze the statistical laws of these characteristics. ### Key conclusions: - **Relationship between fracture characteristics and mixing ratio**: As \( \varphi_3 \) increases, the fracture strain \( \varepsilon_b \) increases monotonically, and the fracture stress \( \sigma_b \) and fracture energy \( W_b \) also increase at high conversion rates \( \varphi_g \). - **Influence of cycle rank**: The changes in fracture characteristics with the cycle rank \( \xi \) generally conform to the master curve of the baseline network, indicating that mixing prepolymers with different functionality degrees mainly affects the fracture properties by changing \( \xi \). - **Fracture bias**: In the case of high functionality degree \( f_2 \), fractures mainly occur on network chains without extended chains, resulting in a slight decrease in fracture stress and fracture energy. Through these studies, the author revealed the influence of mixing star - prepolymers with different functionality degrees on the fracture properties of polymer networks and the mechanisms behind it, providing a theoretical basis for designing polymer materials with excellent mechanical properties.

Phantom chain simulations for fracture of polymer networks created from star polymer mixtures of different functionalities

Phantom chain simulations for fracture of star polymer networks on the effect of arm molecular weight

Phantom-Chain Simulations for the Effect of Node Functionality on the Fracture of Star-Polymer Networks

Phantom chain simulations for the effect of stoichiometry on the fracture of star-polymer networks

Phantom chain simulations for fracture of star polymer networks with various strand densities

Phantom Chain Simulations for Fracture of End-linking Networks

Brownian simulations for fracture of star polymer phantom networks

Elastic behavior of uniform star polymer chains

Molecular simulation of networks formed by end-linking of tetra-arm star polymers: Effects of network structures on mechanical properties

Rationally Leveraging Polymer Chain-Length Heterogeneity for Robust Structural Engineering

Primitive Chain Network Simulations of Entangled Melts of Symmetric and Asymmetric Star Polymers in Uniaxial Elongational Flows

Higher order structures and toughening mechanisms for simultaneously polymerized polymethacrylate/polyurethane

Fracture Mechanism Change at a Heterogeneous Polymer-Polymer Interface Reinforced with in Situ Graft Copolymers

The ARGO-YBJ Detector and high energy GRBs

Molecular Dynamics Simulation of Fracture Mechanism in the Double Interpenetrated Cross-Linked Polymer

Response of Biopolymer Networks Governed by the Physical Properties of Cross-Linking Molecules.

Primitive chain network simulations for double peaks in shear stress under fast flows of bidisperse entangled polymers

The effect of scatter of polymer chain length on strength

Improving the Fracture Property of Polymer Nanocomposites by Employing Nanoparticles As Cross-Linking Points

Fracture and fatigue of entangled and unentangled polymer networks

Sharing the load: stress redistribution governs fracture of polymer double networks