Abstract:Track signal circuit has been widely used in the railway control system to detect the presence of a train. The track impedance is one of the most important parameters in designing the track signal circuit. To this end, finite element method (FEM) could be a good choice due to its capacity of handling complex geometries and media. If FEM is adopted, the open boundary problems in 3D must be tackled in the first place, because the ballastless track locates in an air-ground half space. Second, if the skin effect of conductor is included, the size of each element has to be less than the skin depth, which results in a huge number of unknowns. Accordingly, the computational time and the convergence problem would be big obstacles in reality. Thus, an impedance decomposition approach is proposed in virtue of the physical nature of impedance computation. The track impedance is decomposed into two parts, i.e., the inner and external track impedance. Each kind of impedance is calculated using an appropriate method, which can essentially reduce the computational burden. To validate the proposed decomposition approach, the impedance of a single conductor above the ground is taken as an example, and is calculated by the decomposition method and analytical formulation respectively. The calculated results agree with each other very well. The proposed decomposition approach is applied to calculate the impedance of the double-block ballastless track in Southern Shanxi railway. The frequency- dependent characteristic of the impedance is presented. The absolute value and the trend of the numerical results can reach agreement with the measurements if the certain error is considered from viewpoint of the practical engineering.

Research on Train Shunting Impedance Based on Transmission Line Theory

Analysis of Transient Response of Jointless Track Circuit Based on Multiconductor Transmission Lines Theory

Power Flow Algorithm for Traction Power Supply System of Electric Railway Based on Locomotive and Network Coupling

Zpw2000a Jointless Track Circuit System Modeling and Simulation Considering Adjacent Signal Interference

Train–Network Interactions and Stability Evaluation in High-Speed Railways–Part I: Phenomena and Modeling

Analysis of short-circuit model for DC traction supply system

Research on Stray Current Distribution in a Multitrain Subway System using Finite Element Modeling

Evaluation of Rail Potential and Stray Current with Dynamic Traction Networks in Multitrain Subway Systems

Simulation and Analysis Method for the Operation Characteristics of CIT400 High-Speed Comprehensive Inspection Train Based on Predictive Current Control

Research on Fault Location for Direct Traction Network

Study on Short-Circuit Impedance Characteristics in DN Traction Electric Lines

Uninsulated Track Circuit Parameter Adjustment and Ballast Resistance Analysis

Modeling and Simulation of ZPW-2000A Jointless Track Circuit

Impedance Decomposition Method and Its Application in Calculating the Impedance of Ballastless Track

Research on Short-Circuit Characteristics of Subway DC Traction Power Supply System

Investigation on Interturn Short-Circuit Faults in an Onboard Traction Transformer for High-Speed Railway

Analysis of Influence Factors of Ballastless Track Impedance Characteristics

Analysis of Transient Response of ZPW-2000A Jointless Track Circuit Considering Frequency Variation

Theoretical Calculation and Simulation of the Current Distribution of Electrified Railway with AT Traction Power Supply

Fault Model and Travelling Wave Matching Based Single Terminal Fault Location Algorithm for T-Connection Transmission Line: A Yunnan Power Grid Study

Research on virtual coupling technology in rail transit train collision protection