Abstract:Railway track is a linearly inhomogeneous object that consists of geometrical and elastic discontinuities such as bridges, transition zones, rail joints and crossings. The zones are subjected to the development of local instabilities due to quicker deterioration than the other tracks. Until now, there have been no efficient approaches that could fully exclude the problem of accelerated differential settlements in the problem zones. Many structural countermeasures are directed at controlling the sleeper/ballast loading with the help of fastenings/under-sleeper pad elasticities, sleeper forms and additional bending stiffness reinforcements. However, the efficiency of the methods is difficult to compare. The current paper presents a systematic approach in which the loading distribution effect in the rail support by application of two bending reinforcement methods is compared: auxiliary rail and under-sleeper beam. The study considers only the static effects to reach a clear understanding the influence of the main factors. The track equivalent bending stiffness criterion is proposed for comparing reinforcement solutions. The analysis shows that the activation of the bending stiffness of the reinforcement beams depends on the relative ratio of the rail fastenings stiffness and track support stiffness under sleepers (or under the under-sleeper beam). The comparison demonstrates that conventional auxiliary rail reinforcement solutions are ineffective due to their weak bending because of the high elasticity of fastening clips and the main rail fastenings. The share of an auxiliary rail is maximally 20% in the track bending stiffness and cannot be significantly improved by additional rails. The under-sleeper beam-based reinforcement solutions show noticeably higher efficiency. The highest effect can be achieved by the activation of the horizontal shear interaction between the under-sleeper beam and the rail. The additional track bending stiffness of the under-sleeper-based solutions is about 3.5 times more of the rail one and could be potentially increased to 6–10 times.

Design of railway transition zones: a novel energy-based criterion

Design of railway transition zones: A novel energy-based criterion

Three-dimensional Finite Element Simulation on Moving Load Induced Track Response over Stiffness-varied Base

Dynamic Responses of Ballastless High-Speed Railway Due to Train Passage with Excitation of Uneven Trackbed Settlement

Energy redistribution in railway transition zones by geometric optimisation of a novel transition structure

Improved performance of ballasted tracks at transition zones: A review of experimental and modelling approaches

Gradient Descent Based Restoration Method of Track Irregularity in Asymmetric Chord Reference Method

Vision for Mechanistic-Empirical Railway Track System and Component Analysis and Design

Influence of ballast and railway substructure on the degradation of local geometry defects

Accumulative Deformation in Railway Track Induced by High-Speed Traffic Loading of the Trains

Degradation of railway track geometry – Correlation between track stiffness gradient and differential settlement

Dynamic Performance of Pile-supported Bridge-embankment Transition Zones under High-speed Train Moving Loads

On stress and deformation accumulation of continuously welded rails under cyclic thermal loading in high-speed railways

Riding safety prediction of a high-speed train running on transition zone under foundation settlement

Analysis of Track Bending Stiffness and Loading Distribution Effect in Rail Support by Application of Bending Reinforcement Methods

Study of Problems Related to Laying Ballastless Track in the Turnout of Ballasted Track at High-Speed Railway Stations

Mapping Relation between Rail and Bridge Deformation Considering Nonlinear Contact of Interlayer

Track Geometry Degradation Modelling Considering Multiple Indicators

Mechanical Performance of a Ballastless Track System for the Railway Bridges of High-Speed Lines: Experimental and Numerical Study under Thermal Loading

Evaluating the impact of rail surface roughness post-grinding: An experimental and elastoplastic modelling approach

Identification method of cyclic top defects in track geometry measurements in its early stage