Abstract:Titanium carbides attract attention from both academic and industry fields because of their intriguing mechanical properties and proven potential as appealing candidates in the variety of fields such as nanomechanics, nanoelectronics, energy storage and oil/water separation devices. A recent study revealed that the presence of Ti8C5 not only improves the impact strength of composites as coatings, but also possesses significant strengthening performance as an interlayer material in composites by forming strong bonding between different matrices, which sheds light on the design of impact protection composite materials. To further investigate the impact resistance and strengthening mechanism of Ti8C5, a pilot Molecular Dynamics (MD) study utilizing comb3 potential is carried out on a Ti8C5 nanosheet by subjecting it to hypervelocity impacts. The deformation behaviour of Ti8C5 and the related impact resist mechanisms are assessed in this research. At a low impact velocity ~0.5 km/s, the main resonance frequency of Ti8C5 is 11.9 GHz and its low Q factor (111.9) indicates a decent energy damping capability, which would eliminate the received energy in an interfacial reflection process and weaken the shock waves for Ti8C5 strengthened composites. As the impact velocity increases above the threshold of 1.8 km/s, Ti8C5 demonstrates brittle behaviour, which is signified by its insignificant out-of-plane deformation prior to crack initiation. When tracking atomic Von Mises stress distribution, the elastic wave propagation velocity of Ti8C5 is calculated to be 5.34 and 5.90 km/s for X and Y directions, respectively. These figures are inferior compared with graphene and copper, which indicate slower energy delocalization rates and thus less energy dissipation via deformation is expected prior to bond break. However, because of its relatively small mass density comparing with copper, Ti8C5 presents superior specific penetration. This study provides a fundamental understanding of the deformation and penetration mechanisms of titanium carbide nanosheets under impact, which is crucial in order to facilitate emerging impact protection applications for titanium carbide-related composites.

Estimation of fatigue life of TiN coatings using cyclic micro-impact testing

Estimation of fatigue life of TiN coatings using cyclic micro-impact testing

Atomistic Investigation of Titanium Carbide Ti8C5 under Impact Loading

Study on fatigue and wear behaviors of a TiN coating using an inclined impact-sliding test

Enhancing mechanism of TC4 high-cycle fatigue performance by the introduction of hard nitride mono-and multilayer coatings

Stress-sensitive fatigue crack initiation mechanisms of coated titanium alloy

Micro-scale impact resistance of coatings on hardened tool steel and cemented carbide

The effect of the substrate on the mechanical properties of TiN coatings

Investigations on microstructure, mechanical and tribological properties of TiN coatings deposited on three different tool materials

Substrate and bonding layer effects on performance of DLC and TiN biomedical coatings in Hank's solution under cyclic impact–sliding loads

Nanoindentation and Tribological Behavior of TiN-TiCN-TiAlN Multilayer Coatings on AISI D3 Tool Steel

Cr/CrN coating effect on the fatigue crack nucleation period of Ti-6Al-4V alloy

Study of the Fatigue Wear Behaviors of a Tungsten Carbide Diamond-Like Carbon Coating on 316L Stainless Steel

Prediction of contact stress and wear analysis of nitrided and CAPVD coated AISI H11 steel under dry sliding conditions

Engineering Relationships for Computational and Analytical Prediction of Coating Wear during Tribological Tests

Calculation and Analytical Prediction of Coating Wear during Tribological Tests Based on Models of Contact Fatigue Failure

Effect of carbon content on the tribological behaviour of TiC x coatings prepared by reactive HiPIMS

The study of the adhesion of a TiN coating on steel and titanium alloy substrates using a multi-mode scratch tester

Effect of Multilayered Structure on Properties of Ti/TiN Coating

Mechanical Properties and Fracture Toughness of Multilayer Hard Coatings Using Nanoindentation

Effects of duty cycle on microstructure of TiN coatings prepared using CAE/HiPIMS