Overview of the ATLAS ALFA detectors, performance and physics analysis

Peter J. Bussey

2023-07-20

Abstract:An overview is presented of the ALFA forward detector system in the ATLAS detector at the LHC, CERN. Details of the construction are given, with summaries of the resulting analysis.

High Energy Physics - Experiment,Instrumentation and Detectors

What problem does this paper attempt to address?

Overview of ATLAS Forward Proton (AFP) detectors in Run-2 and outlook for Run-3 analyses

Andre Sopczak

2023-07-19

Abstract:We describe the status of the ATLAS Forward Proton (AFP) detectors in Run-2 and the outlook for Run-3 analyses. The performance is discussed. This includes the Tracking and Time-of-Flight detectors, the luminosity, the alignment, the trigger, and data quality monitoring. Additionally, key physics results from the first AFP analyses are showcased.

High Energy Physics - Experiment,Instrumentation and Detectors
Overview of ATLAS forward proton detectors for LHC Run 3 and plans for the HL-LHC

Maciej Trzebinski

DOI: https://doi.org/10.1016/j.nima.2023.168187

2023-10-18

Abstract:The status of the ATLAS Roman Pot detectors (AFP and ALFA) for LHC Run 3 after all refurbishments and improvements done during Long Shutdown 2 is discussed.

High Energy Physics - Experiment,Instrumentation and Detectors
Status of the Forward Physics Projects in ATLAS

Stefan Ask

DOI: https://doi.org/10.48550/arXiv.0706.0644

2007-06-05

High Energy Physics - Experiment

Abstract:The ATLAS experiment at the LHC is building several detector systems for forward physics studies and to determine the luminosity. The main forward systems consist of a Cerenkov detector called LUCID, a Zero Degree Calorimeter (ZDC) and Roman Pots which will house a scintillating fiber tracker system called ALFA. Here we report some of the forward physics activities that are foreseen in ATLAS together with the status of the related detector systems.
ATLAS Forward Detectors and Physics

N. Soni

DOI: https://doi.org/10.48550/arXiv.1006.5426

2010-06-29

Abstract:In this communication I describe the ATLAS forward physics program and the detectors, LUCID, ZDC and ALFA that have been designed to meet this experimental challenge. In addition to their primary role in the determination of ATLAS luminosity these detectors - in conjunction with the main ATLAS detector - will be used to study soft QCD and diffractive physics in the initial low luminosity phase of ATLAS running. Finally, I will briefly describe the ATLAS Forward Proton (AFP) project that currently represents the future of the ATLAS forward physics program.

High Energy Physics - Experiment
Alice Alignment, Tracking and Physics Performance Results

Andrea Rossi

DOI: https://doi.org/10.48550/arXiv.1101.3491

2011-01-19

Abstract:The ALICE detector was designed to track and identify particles in a wide transverse momentum range, from more than 100 GeV/c down to ~100 MeV/c. The innermost barrel-like detector, the Inner Tracking System (ITS), is dedicated to precise tracking and to primary and secondary vertices reconstruction. In this proceeding we present the ITS performance for tracking, primary vertex reconstruction and particle identification capability. The current understanding of the detector response is the result of an extensive phase of commissioning started with 2008 cosmic-ray run and finalized with data from pp collisions: the alignment status of the three ITS sub-systems (Silicon Pixel Detectors, Silicon Drift Detectors, Silicon Strip Detectors) and the study of the detector material budget via the reconstruction of gamma conversion in the material are presented. Precise tracking is required to reconstruct and separate the primary vertex of interaction from secondary vertices from hyperons and heavy-flavour meson decays: some examples of the achieved results are shown.

Instrumentation and Detectors,High Energy Physics - Experiment,Nuclear Experiment
Getting Ready for Physics - Commissioning of the ALICE Experiment

H.R. Schmidt

DOI: https://doi.org/10.48550/arXiv.0905.4359

2009-05-27

Abstract:ALICE at CERN-LHC is an experiment dedicated to the study of high-energy heavy-ion collision. In this paper we will briefly describe the experimental layout and give an overview on the installation status of the ALICE detector components including an outlook towards the completion of the staged detector setup. We will review the commissioning of the detector components with emphasis on the central detectors, in particular the time projection chamber (TPC). The commissioning took place in summer 2008 awaiting the first beams from the LHC in the fall. The result from commissioning are compared with the performance figures, which are outlined in the ALICE Physics Performance Reports.

Instrumentation and Detectors,High Energy Physics - Experiment
Physics program and performance of the ALICE Forward Calorimeter upgrade (FoCal)

Laura Maria Huhta

2024-09-14

Abstract:The FoCal is a high-granularity forward calorimeter to be installed as an ALICE upgrade subsystem during the LHC Long Shutdown 3 and take data during the LHC Run 4. The FoCal detector, covering a pseudorapidity interval of $3.2 < \eta < 5.8$, extends the ALICE physics program with the capability to investigate gluon Parton Distribution Functions (PDFs) in the low-$x$ regime, down to $x \approx 10^{-6}$. FoCal measurements will provide experimental constraints for PDFs in a region of phasespace where experimental data is scarce, as well as enable the study of non-linear QCD effects like gluon saturation. The FoCal detector consists of two components. The highly-granular Si+W electromagnetic calorimeter (FoCal-E) with pad and pixel longitudinal and transverse segmented readout layers provides high spatial resolution for discriminating between isolated photons and decay photon pairs. The hadronic calorimeter (FoCal-H) is constructed from copper capillary tubes filled with scintillator fibers and is used for isolation energy measurement and jets. With this detector design, FoCal is capable of measuring direct photons, jets, and the photo-production of vector mesons such as the $J/\psi$ in p$-$Pb and Pb$-$Pb ultra-peripheral collisions. In addition, correlations of different probes can be studied, including $\gamma$$-$jet, jet$-$jet and $\pi^{0} - \pi^{0}$ correlations. These measurements will place stringent constraints to various theoretical models incorporating non-linear QCD effects. This contribution gives an overview of the FoCal physics program. Also, recent experimental results of ever-improving prototypes of the detector, which were tested at the Test Beam facilities of CERN in the years 2021$-$2023, as well as simulation studies showcasing the robustness of the detector design and its physics potential are presented.

High Energy Physics - Experiment
Characterization of the ATLAS Liquid Argon Front-End ASIC ALFE2 for the HL-LHC upgrade

D. Matakias,G. Carini,H. Chen,M. Dabrowski,G. Deptuch,L. Duflot,J. Kierstead,T. Liu,H. Ma,N. Morange,S. Rescia,S. Tang,H. Xu

2024-02-14

Abstract:ALFE2 is an ATLAS Liquid Argon Calorimeter (LAr) Front-End ASIC designed for the HL-LHC upgrade. ALFE2 comprises four channels of pre-amplifiers and CR-(RC)2 shapers with adjustable input impedance. ALFE2 features two separate gain outputs to provide 16-bit dynamic-range coverage and an optimum resolution. ALFE2 is characterized using a Front-End Test Board (FETB) based on a Zynq UltraScale+ MPSoC and two octal-channel 16-bit high-speed ADCs. The test results indicate that ALFE2 fulfills or greatly exceeds all specifications on gain, noise, linearity, uniformity, and radiation tolerance.

Instrumentation and Detectors
The Pixel Detector of the ATLAS experiment for the Run2 at the Large Hadron Collider

Yosuke Takubo

DOI: https://doi.org/10.1088/1748-0221/10/12/C12001

2014-11-20

Abstract:The Pixel Detector of the ATLAS experiment has shown excellent performance during the whole Run-1 of LHC. Taking advantage of the long shutdown, the detector was extracted from the experiment and brought to surface, to equip it with new service quarter panels, to repair the modules and to ease installation of the Insertable B-Layer (IBL). The IBL is a fourth layer of pixel detectors, and has been installed in May 2014 between the existing Pixel Detector and a new smaller radius beam-pipe at a radius of 3.3 cm. To cope with the high radiation and pixel occupancy due to the proximity to the interaction point, a new read-out chip and two different silicon sensor technologies (planar and 3D) have been developed. Furthermore, the physics performance will be improved through the reduction of pixel size while, targeting for a low material budget, a new mechanical support using light weight staves and CO2 based cooling system have been adopted. An overview of the refurbishing of the Pixel Detector and the IBL project as well as the experience in its construction will be presented, focusing on adopted technologies, module and stave production, qualification of assembly procedure, integration of staves around the beam pipe and commissioning of the detector.

Instrumentation and Detectors
First tracking performance results from the ATLAS Fast TracKer

Benjamin Hooberman

DOI: https://doi.org/10.48550/arXiv.1911.07962

2019-11-19

Abstract:Particle physicists at the Large Hadron Collider investigate the properties of matter at subatomic length scales by colliding together bunches of high-energy protons and observing the decay products of the collisions. ATLAS is one of two general-purpose detectors that reconstruct the interactions and, as part of a wide range of physics goals, measure the production of Higgs bosons and searches for exotic new phenomena including supersymmetry, extra dimensions of spacetime, and dark matter. Selecting the interesting collision events using hardware- and software-based triggers is a major challenge that will become more difficult as the luminosity increases in future data. The ATLAS Fast TracKer (FTK) is a custom electronics system that performs fast hardware-based tracking of charged particles for use in trigger decisions. In 2018, two FTK "Slices" covering portions of the ATLAS detector were installed and commissioned using proton-proton collisions, to prepare for physics data-taking in Run 3. The FTK track-finding and track-fitting strategies and the tracking performance for the FTK Slices are presented. Strategies for coping with changing beamspot and other conditions in future data are discussed. A strategy for triggering on displaced tracks from long-lived particles is also presented.

Instrumentation and Detectors,High Energy Physics - Experiment
Performance of the ATLAS Detector using First Collision Data

ATLAS Collaboration

DOI: https://doi.org/10.1007/JHEP09%282010%29056

2010-05-28

Abstract:More than half a million minimum-bias events of LHC collision data were collected by the ATLAS experiment in December 2009 at centre-of-mass energies of 0.9 TeV and 2.36 TeV. This paper reports on studies of the initial performance of the ATLAS detector from these data. Comparisons between data and Monte Carlo predictions are shown for distributions of several track- and calorimeter-based quantities. The good performance of the ATLAS detector in these first data gives confidence for successful running at higher energies.

High Energy Physics - Experiment
Early B-physics at ATLAS

S. Oda

DOI: https://doi.org/10.48550/arXiv.1010.3675

2010-10-19

Abstract:The B-physics program at the ATLAS experiment, which covers the mid-rapidity region, complements that at the dedicated LHCb experiment, which covers the forward rapidity region. At the early stage of the LHC operation, the program concentrated on understanding of detector performance and measurements of quarkonia and D mesons. This article presents recent results of the B-physics program at ATLAS.

High Energy Physics - Experiment
Prospects for Proton-Proton Measurements with Tagged Protons in ATLAS

Maciej Trzebinski

DOI: https://doi.org/10.48550/arXiv.1909.10827

2019-09-24

Abstract:In 2017, ATLAS has been equipped with a new, dedicated detector system allowing measurements of forward protons scattered at small angles in diffractive and electromagnetic processes. These ATLAS Forward Proton detectors (AFP) can operate during the standard high-luminosity LHC runs and collect large amounts of integrated luminosity. This gives a possibility to study rare interactions, in particular, the two-photon processes. The physics programme includes measurements of photon-photon interactions present in the Standard Model, as well as using searches for new physics. In this paper, the AFP detectors and physics goals are briefly presented.

Instrumentation and Detectors,High Energy Physics - Experiment
The ALICE 3 detector concept for LHC Runs 5 and 6 and its physics performance

Robert Vertesi

2024-09-16

Abstract:The LHC Run 5 and 6 data taking phases will bring unprecedented luminosity in high-energy proton-proton and in heavy-ion collisions. The ALICE Collaboration proposes a next-generation experiment, ALICE 3, specifically designed to operate with the future LHC. ALICE 3 will feature a large pixel-based tracking system covering eight units of pseudorapidity, complemented by advanced particle identification systems. These include silicon time-of-flight layers, a ring-imaging Cherenkov detector, a muon identification system, and an electromagnetic calorimeter. By placing the vertex detector on a retractable plate inside the beam pipe, a track pointing resolution better than 10 microns can be achieved for the transverse momentum range $p_T$>200 MeV/c. ALICE 3 will be capable of innovative measurements of the quark-gluon plasma (QGP) and explore new frontiers in quantum chromodynamics (QCD). The detailed study of thermal and dynamical properties of QGP will be made possible by measuring low-$p_T$ heavy-flavour production, including beauty hadrons, multi-charm baryons, and charm-charm correlations. Precise multi-differential measurements of dielectron emission will allow for the exploration of chiral-symmetry restoration and the time-evolution of QGP temperature. In addition to QGP studies, ALICE 3 will make unique contributions to the physics of the hadronic phase, through femtoscopic studies of charm meson interaction potentials and searches for nuclei containing charm. This contribution covers the detector design, expected physics performance, and the current status of detector research and development.

Instrumentation and Detectors,Nuclear Experiment
Performance of the ATLAS forward proton Time-of-Flight detector in Run 2

ATLAS Collaboration

DOI: https://doi.org/10.1088/1748-0221/19/05/P05054

2024-05-31

Abstract:We present performance studies of the Time-of-Flight (ToF) subdetector of the ATLAS Forward Proton (AFP) detector at the LHC. Efficiencies and resolutions are measured using high-statistics data samples collected at low and moderate pile-up in 2017, the first year when the detectors were installed on both sides of the interaction region. While low efficiencies are observed, of the order of a few percent, the resolutions of the two ToF detectors measured individually are 21 ps and 28 ps, yielding an expected resolution of the longitudinal position of the interaction, $z_{vtx}$, in the central ATLAS detector of $5.3 \pm 0.6$ mm. This is in agreement with the observed width of the distribution of the difference between $z_{vtx}$ measured independently by the central ATLAS tracker and by the ToF detector, of $6.0 \pm 2.0$ mm.

Instrumentation and Detectors,High Energy Physics - Experiment
ALICE Overview

Francesco Prino

DOI: https://doi.org/10.48550/arXiv.1112.0700

2011-12-04

Abstract:A general overview of the results obtained by the ALICE experiment from the analysis of the $\PbPb$ data sample collected at the end of 2010 during the first heavy-ion run at the LHC is presented.

Nuclear Experiment,High Energy Physics - Experiment
The ATLAS Level-1 Trigger: Status of the System and First Results from Cosmic-Ray Data

David Berge

DOI: https://doi.org/10.1016/j.nima.2007.08.031

2007-07-27

Abstract:The ATLAS detector at CERN's Large Hadron Collider (LHC) will be exposed to proton-proton collisions from beams crossing at 40 MHz. At the design luminosity of 10^34 cm^-2 s^-1 there are on average 23 collisions per bunch crossing. A three-level trigger system will select potentially interesting events in order to reduce the read-out rate to about 200 Hz. The first trigger level is implemented in custom-built electronics and makes an initial fast selection based on detector data of coarse granularity. It has to reduce the rate by a factor of 10^4 to less than 100 kHz. The other two consecutive trigger levels are in software and run on PC farms. We present an overview of the first-level trigger system and report on the current installation status. Moreover, we show analysis results of cosmic-ray data recorded in situ at the ATLAS experimental site with final or close-to-final hardware.

Instrumentation and Detectors
Performance and operation experience of the Atlas Semiconductor Tracker

Zhijun Liang

DOI: https://doi.org/10.1142/S2010194514602956

2014-02-26

Abstract:We report on the operation and performance of the ATLAS Semi-Conductor Tracker (SCT), which has been functioning for 3 years in the high luminosity, high radiation environment of the Large Hadron Collider at CERN. We also report on the few improvements of the SCT foreseen for the high energy run of the LHC. We find $99.3\%$ of the SCT modules are operational, the noise occupancy and hit efficiency exceed the design specifications; the alignment is very close to the ideal to allow on-line track reconstruction and invariant mass determination. We will report on the operation and performance of the detector including an overview of the issues encountered. We observe a significant increase in leakage currents from bulk damage due to non-ionizing radiation and make comparisons with the predictions.

Instrumentation and Detectors,High Energy Physics - Experiment
Performance of the ALICE Electromagnetic Calorimeter

ALICE Collaboration

DOI: https://doi.org/10.1088/1748-0221/18/08/P08007

2023-09-30

Abstract:The performance of the electromagnetic calorimeter of the ALICE experiment during operation in 2010-2018 at the Large Hadron Collider is presented. After a short introduction into the design, readout, and trigger capabilities of the detector, the procedures for data taking, reconstruction, and validation are explained. The methods used for the calibration and various derived corrections are presented in detail. Subsequently, the capabilities of the calorimeter to reconstruct and measure photons, light mesons, electrons and jets are discussed. The performance of the calorimeter is illustrated mainly with data obtained with test beams at the Proton Synchrotron and Super Proton Synchrotron or in proton-proton collisions at $\sqrt{s}=13$ TeV, and compared to simulations.

Instrumentation and Detectors,High Energy Physics - Experiment,Nuclear Experiment

Overview of the ATLAS ALFA detectors, performance and physics analysis

Overview of ATLAS Forward Proton (AFP) detectors in Run-2 and outlook for Run-3 analyses

Overview of ATLAS forward proton detectors for LHC Run 3 and plans for the HL-LHC

Status of the Forward Physics Projects in ATLAS

ATLAS Forward Detectors and Physics

Alice Alignment, Tracking and Physics Performance Results

Getting Ready for Physics - Commissioning of the ALICE Experiment

Physics program and performance of the ALICE Forward Calorimeter upgrade (FoCal)

Characterization of the ATLAS Liquid Argon Front-End ASIC ALFE2 for the HL-LHC upgrade

The Pixel Detector of the ATLAS experiment for the Run2 at the Large Hadron Collider

First tracking performance results from the ATLAS Fast TracKer

Performance of the ATLAS Detector using First Collision Data

Early B-physics at ATLAS

Prospects for Proton-Proton Measurements with Tagged Protons in ATLAS

The ALICE 3 detector concept for LHC Runs 5 and 6 and its physics performance

Performance of the ATLAS forward proton Time-of-Flight detector in Run 2

ALICE Overview

The ATLAS Level-1 Trigger: Status of the System and First Results from Cosmic-Ray Data

Performance and operation experience of the Atlas Semiconductor Tracker

Performance of the ALICE Electromagnetic Calorimeter