Abstract:Moisture absorption of polyurethane foams (PUFs) lead to its plasticization and swelling deformation, which can affect its precise installation in precision instruments for engineering applications. In addition, changes in mechanical properties after moisture absorption can affect its safety in service in some vibration damping applications. Herein, a series of foams with different compositions were prepared, and the factors influencing the hygroscopicity of polyurethane foams and the mechanism of hygroscopicity were investigated by combining experimental and theoretical simulations to provide data support for the preparation conditions and molecular structure design of foams in this context. The experimental results showed that the adsorption kinetics of the foams were in accordance with FICK's law, and the mechanical properties of the foams were slightly reduced by moisture absorption, Hydrophobically modified PU-5 has the lowest moisture absorption rate (0.616%) and dimensional change rate (0.118%), but its compressive strength is poor, only 10.548 MPa; PU-6 with fluorosurfactant has the least reduction in compressive strength after moisture absorption (1.63%), its moisture absorption rate and dimensional change rate are 0.738% and 0.168%, respectively; while PU-4 with ammonia ether crosslinker has the largest compressive strength with moisture absorption rate and dimensional change rate of 0.818% and 0.150%, respectively, and the compressive strength decreases by 4.6% after moisture absorption. Considering that the application context requires that the changes in dimensional and mechanical properties after moisture absorption are more important, so PU-4 is the best system. In addition, As the temperature and humidity rise, the moisture absorption increases significantly, when the temperature rises from 25 degrees C to 45 degrees C, the moisture absorption rate is three times the original, when the humidity rises from 40% to 80%, the moisture absorption rate has the same change. More importantly, the moisture absorption mechanism and moisture absorption pathway at the atomic scale were revealed by two-dimensional infrared (2D IR) and low-field NMR, and the experimental results were verified by molecular dynamics simulations, and the simulations and experimental results were found to be consistent. It can be seen from low-field NMR and 2D IR that the foam contains four states of water in the initial stage and the largest proportion is bound water, NH is the most moisture-sensitive group in the hygroscopic process, OH is the main reason for the increase of bound water, and bound water absorbs moisture earlier than free water. Kinetic simulation shows that hygroscopicity of PUF was primarily attributed to hydrogen bonds between oxygen atoms and water molecules, at the beginning state of moisture absorption the velocity of water accumulation inside of porous PU block is larger than that in the surface of porous PU block. Basing in the detailed hygroscopic data was presented as well as a reliable and conclusive analysis of polyurethane foam, This work screened the optimal foam system with low moisture adsorption and good mechanical properties and elucidated the moisture absorption mechanism of the foam at the molecular scale, providing data to support the selection of foams in the context of precision instrument installation and vibration-damping applications.

Moisture-Driven Degradation Mechanisms in the Viscoelastic Properties of TPU-Based Syntactic Foams

Moisture-Driven Morphology Changes in the Thermal and Dielectric Properties of TPU-Based Syntactic Foams

Viscoelastic Property Evolution of Thermoplastic Polyurethane During Annealing Treatment and Its Correlation with Segmental Crystallization

Oriented distribution structure, interaction, and performance of thermoplastic polyurethane/selective hindered amine hybrids

Study on Hygroscopic Mechanism and Atomic‐scale Hygroscopic Pathways of Polyurethane Foams

Numerical investigation of fracture behaviour of polyurethane adhesives under the influence of moisture

Supercritical CO2 Foaming and Shrinkage Resistance of Thermoplastic Polyurethane/modified Magnesium Borate Whisker Composite

Fabrication of thermoplastic polyurethane (TPU) / thermoplastic amide elastomer (TPAE) composite foams with supercritical carbon dioxide and their mechanical properties

Microcellular Thermoplastic Polyurethane (TPU) with Multimodal Cell Structure Fabricated Based on Pressure Swing Strategy and Its Compressive Mechanical Properties

Temperature-induced Evolution of Micro-structure and Chain Dynamics in Thermoplastic Polyurethane with Low Hard Segment Content as Studied by In Situ Synchrotron SAXS and Time-Domain NMR Experiments

Kinetic Modeling of Thermal Degradation of TDI/MDI-Based Flexible Polyurethane Foam under Nitrogen and Air Atmospheres with Shuffled Complex Evolution Algorithm: Insights from TG-FTIR Analysis.

A novel semi-continuous preparation mode of ultra-low density thermoplastic polyurethane foam

Tpu/Pla Blend Foams: Enhanced Foamability, Structural Stability, And Implications For Shape Memory Foams

Antishrinking Strategy of Microcellular Thermoplastic Polyurethane by Comprehensive Modeling Analysis

Approach to Fabricating Thermoplastic Polyurethane Blends and Foams with Tunable Properties by Twin‐Screw Extrusion and Microcellular Injection Molding

Assessment of frequency and amplitude dependence on the cyclic degradation of polyurethane foams

Structural and Viscoelastic Properties of Thermoplastic Polyurethanes Containing Mixed Soft Segments with Potential Application as Pressure Sensitive Adhesives

A new microcellular foaming strategy to develop structure-gradient thermoplastic polyurethane foams with enhanced elasticity

Hyperelastic Material Parameter Determination and Numerical Study of TPU and PDMS Dampers

Architected flexible syntactic foams: Additive manufacturing and reinforcing particle driven matrix segregation

Large strain micromechanics of thermoplastic elastomers with random microstructures