Abstract:Astronomical observations with gamma rays in the range of several hundred keV to hundreds of MeV currently represent the least explored energy range. To address this so-called MeV gap, we designed and built a prototype CsI:Tl calorimeter instrument using a commercial off-the-shelf (COTS) SiPMs and front-ends which may serve as a subsystem for a larger gamma-ray mission concept. During development, we observed significant non-linearity in the energy response. Additionally, using the COTS readout, the calorimeter could not cover the four orders of magnitude in energy range required for the telescope. We, therefore, developed dual-gain silicon photomultiplier (SiPM) boards that make use of two SiPM species that are read out separately to increase the dynamic energy range of the readout. In this work, we investigate the SiPM's response with regards to active area ($3\times3 \ \mathrm{mm}^2$ and $1 \times 1 \ \mathrm{mm}^2$) and various microcell sizes ($10$, $20$, and $35 \ \mu \mathrm{m}$). We read out $3\times3\times6 \ \mathrm{cm}^3$ CsI:Tl chunks using dual-gain SiPMs that utilize $35 \ \mu \mathrm{m}$ microcells for both SiPM species and demonstrate the concept when tested with high-energy gamma-ray and proton beams. We also studied the response of $17 \times 17 \times 100 \ \mathrm{mm}^3$ CsI bars to high-energy protons. With the COTS readout, we demonstrate a sensitivity to $60 \ \mathrm{MeV}$ protons with the two SiPM species overlapping at a range of around $2.5-30 \ \mathrm{MeV}$. This development aims to demonstrate the concept for future scintillator-based high-energy calorimeters with applications in gamma-ray astrophysics.

What problem does this paper attempt to address?

The main problem that this paper attempts to solve is to expand the energy dynamic range of gamma - ray detectors used for astronomical observations, especially in the energy range from several hundred keV to several hundred MeV, which is known as the "MeV gap". Currently, this energy range is one of the least explored regions in the astronomical sky. To meet this challenge, the research team designed and built a prototype CsI:Tl calorimeter instrument, using commercially available silicon photomultipliers (SiPMs) and front - end read - out circuits. However, during the development process, they observed significant non - linearity in the energy response, and the calorimeter using commercially available read - out circuits could not cover the four - order - of - magnitude energy range required by the telescope. Therefore, they developed a dual - gain silicon photomultiplier (SiPM) board, using two different types of SiPMs for separate read - outs to increase the read - out energy dynamic range. Specifically, the study solved the problem in the following ways: 1. **Developing a dual - gain SiPM board**: By using two SiPMs with different characteristics (one optimized for the low - energy range and the other for high - energy events), each having a different effective area and possibly mixed micro - cell sizes, to reduce the saturation of SiPMs and electronics. 2. **Experimental verification**: Experiments were carried out at the High - Intensity Gamma - ray Source (HIGS) facility and the Crocker Nuclear Laboratory at the University of California, Davis, to test the responses of these custom - made SiPMs to gamma - rays and high - energy protons. 3. **Data analysis and correction**: By analyzing the experimental data, the overlap of the two SiPMs in the energy range from 2.6 to 20 MeV was demonstrated, and the data of the two SiPMs were unified through linear correction, thus verifying the effectiveness of the dual - gain concept. Ultimately, this study aims to provide technical support for future high - energy calorimeters based on scintillators, especially for applications in the field of gamma - ray astrophysics.

Development of Dual-Gain SiPM Boards for Extending the Energy Dynamic Range

Design of a high-dynamic-range prototype readout system for VLAST calorimeter

Exploring Large-Volume GAGG Scintillators for use in MeV Gamma-Ray Astrophysics

Development of a CsI:Tl calorimeter subsystem for the All-Sky Medium-Energy Gamma-Ray Observatory (AMEGO)

Development of a CsI Calorimeter for the Compton-Pair (ComPair) Balloon-Borne Gamma-Ray Telescope

Scintillation detectors constructed with an optimized 2x2 silicon photomultiplier array

Light-Trap: A SiPM Upgrade for VHE Astronomy and Beyond

Development of a SiPM Pixel Prototype for the Large-Sized Telescope of the Cherenkov Telescope Array

A Novel High Dynamic-Range SiPM for Scintillator-Based Hadronic Calorimetry

Development of a 3” LaBr3 SiPM-Based Detection Module for High Resolution Gamma Ray Spectroscopy and Imaging

The Light-Trap: A novel concept for a large SiPM-based pixel for Very High Energy gamma-ray astronomy and beyond

Design and Performance of SiPM-based Readout of PbF2 Crystals for High-Rate, Precision Timing Applications

Low power implementation of high frequency SiPM readout for Cherenkov and scintillation detectors in TOF-PET

Direct Comparison of SiPM and PMT Sensor Performances in a large-size imaging air Cherenkov telescope

Characterization of SiPM and development of test bench modules for the next-generation cameras for Large-Sized Telescopes for Cherenkov Telescope Array

A study on Performance Boost of a 17~m class Cherenkov telescope with a SiPM-based camera

Silicon Photomultiplier selection for Large Array of Imaging Atmospheric Cherenkov Telescopes

Compact Back-End Electronics with Temperature Compensation and Efficient Data Management for In Situ SiPM-Based Radiation Detection

First operation of undoped CsI directly coupled with SiPMs at 77 Kelvin

Front-End Design for SiPM-Based Monolithic Neutron Double Scatter Imagers