Abstract:Motivated by recent advancements highlighting Ta as a promising material in low-loss superconducting circuits and showing long coherence times in superconducting qubits, we have explored the effect of cryogenic temperatures on the growth of Ta and its integration in superconducting circuits. Cryogenic growth of Ta using a low temperature molecular beam epitaxy (MBE) system is found to stabilize single phase $\alpha$-Ta on several different substrates, which include Al$\mathrm{_2}$O$\mathrm{_3}$(0001), Si(001), Si(111), SiN${_x}$, and GaAs(001). The substrates are actively cooled down to cryogenic temperatures and remain < 20 K during the Ta deposition. X-ray $\theta$-2$\theta$ diffraction after warming to room temperature indicates the formation of polycrystalline $\alpha$-Ta. The 50 nm $\alpha$-Ta films grown on Al$\mathrm{_2}$O$\mathrm{_3}$(0001) at a substrate manipulator temperature of 7 K have a room temperature resistivity ($\mathrm{\rho _{300 K}}$) of 13.4 $\mathrm{\mu \Omega}$cm, a residual resistivity ratio (RRR) of 17.3 and a superconducting transition temperature (T$_C$) of 4.14 K, which are comparable to bulk values. In addition, atomic force microscopy (AFM) indicates that the film grown at 7 K with an RMS roughness of 0.45 nm was significantly smoother than the one grown at room temperature. Similar properties are found for films grown on other substrates. Results for films grown at higher substrate manipulator temperatures show higher $\mathrm{\rho _{300 K}}$, lower RRR and Tc, and increased $\beta$-Ta content. Coplanar waveguide resonators with a gap width of 3 $\mathrm{\mu}$m fabricated from cryogenically grown Ta on Si(111) and Al$\mathrm{_2}$O$\mathrm{_3}$(0001) show low power Q$_i$ of 1.9 million and 0.7 million, respectively, indicating polycrystalline $\alpha$-Ta films may be promising for superconducting qubit applications even though they are not fully epitaxial.

Epitaxial α-Ta (110) film on a-plane sapphire substrate for superconducting qubits on wafer scale

High-quality superconducting α-Ta film sputtered on heated silicon substrate

Investigation of the deposition of $α$-tantalum (110) films on a-plane sapphire substrate by molecular beam epitaxy for superconducting circuit

alpha-Ta Films on c-plane Sapphire with Enhanced Microstructure

Stable and low loss oxide layer on α-Ta (110) film for superconducting qubits

Tantalum thin films sputtered on silicon and on different seed layers: material characterization and coplanar waveguide resonator performance

Growth and Structure of alpha-Ta films for Quantum Circuit Integration

Revealing the Origin and Nature of the Buried Metal-Substrate Interface Layer in Ta/Sapphire Superconducting Films

Superconductivity and Quantum Oscillations in Ternary Weyl Semimetal TaIrTe4

Molecular beam epitaxy growth of superconducting tantalum germanide

Cryogenic growth of tantalum thin films for low-loss superconducting circuits

Why Superconducting Ta Qubits Have Fewer Tunneling Two-Level Systems at the Air-Oxide Interface Than Nb Qubits

Grain size in low loss superconducting Ta thin films on c-axis sapphire

Two-Level Systems in Nucleated and Non-Nucleated Epitaxial alpha-Tantalum films

Tantalum airbridges for scalable superconducting quantum processors

Ultrathin Magnesium-based Coating as an Efficient Oxygen Barrier for Superconducting Circuit Materials

Chemical Mechanical Planarization for Ta-based Superconducting Quantum Devices

Structure and Formation Mechanisms in Tantalum and Niobium Oxides in Superconducting Quantum Circuits

Fabrication of Al/AlOx/Al junctions with high uniformity and stability on sapphire substrates

Superconductivity in tantalum self-intercalated 4$Ha$-Ta$_{1.03}$Se$_2$