Abstract:This work describes a novel finite strain hypo-elastic formulation for amorphous thermoset polymers working in the glassy regime. The constitutive formulation is able to describe time and pressure-dependent behaviour under loading rates ranging from quasi-static to impact-type loading conditions and to account for thermo-mechanical coupling effects. A non-linear pressure dependent potential function is introduced to capture the non-associative visco-plastic potential flow for volumetric plastic strain control. The formulation also incorporates an internal state or deformation resistance variable to enable the description of the polymer hardening - softening behaviour, as well as a novel relation for the dissipative fraction of the plastic work in terms of the equivalent accumulated plastic strain. The constitutive model is formulated within a finite strain kinematics framework, and full details of its numerical implementation into the finite element method using a fully implicit Euler Backward algorithm are given. Model calibration is carried out for three different thermosetting resins (PR520 and RTM6 Epoxies, and MMA adhesives).To illustrate the model capabilities, two case studies are investigated: (i) the de-formation behaviour of epoxy under moderate and impact-type loading conditions under isothermal and fully adiabatic conditions, and (ii) the fracture behaviour of adhesive layers used to bond stiff metallic substrates. Results on RTM6 epoxy show that at, e.g., 60% true strain, 48.5% of the rate of plastic work is dissipative, and that the corresponding predicted increase in temperature due to the locally dissipated heat is consistent with published calorimetry data on a similar thermoset polymer. It was also found that, by coupling the proposed constitutive model with a cohesive zone model, it was possible to predict accurately the effect of an MMA adhesive layer thickness and pressure-dependency on the growth of an interfacial crack between the MMA adhesive and the metallic substrates. The proposed model should constitute a generic phenomenological formulation for the mechanical behaviour prediction of a wide range of thermoset polymers under confined and quasi-adiabatic conditions such as in composites and adhesive joints.

Numerical explorations of solvent borne adhesives: A lattice-based approach to morphology formation

Modeling the Solvent-Induced Shape-Memory Behavior of Glassy Polymers

Mesoscale modeling of the rheology of pressure sensitive adhesives through inclusion of transient forces

Adhesion and non-linear rheology of adhesives with supramolecular crosslinking points

Quantitative analysis of the debonding structure of soft adhesives

Solvent-Dependent Critical Properties of Polymer Adsorption

Non-classical water diffusion in an industrial adhesive

A Mesoscopic Lattice Model for Morphology Formation in Ternary Mixtures with Evaporation

A simple microscopic model for the dynamics of adhesive failure

Peeling an elastic film from a soft viscoelastic adhesive: experiments and scaling laws

Model Based on the River Meander Curve for Simulating the Adhesion of Cross-Linked Polymers to Rough Surfaces

Nonlinear Viscoelastic Modeling of Adhesive Failure for Polyacrylate Pressure-Sensitive Adhesives

Contact with coupled adhesion and friction: Computational framework, applications, and new insights

Numerical modelling and experimental validation of squeezing flows in the automobile production

SUPPLEMENTARY INFORMATION Adhesive Loose Packing of Small Dry Particles

A Finite Deformation Formulation for Amorphous Glassy Polymers under Moderate and Impact Strain Rates: Application to Adhesive Films

Structure and Dynamics of Solvated Polymers near a Silica Surface: On the Different Roles Played by Solvent

Large-scale simulation of adhesion dynamics for end-graphed polymers

Tensile and Shear Creep Behavior of Structural Adhesives: Experiments and Modeling

Bulk and Interfacial Contributions to the Debonding Mechanisms of Soft Adhesives: Extension to Large Strains

Viscoelastic Adhesive Interfacial Model and Experimental Characterization for Interfacial Parameters