Abstract:In this paper, we analyze the impact of characteristic impedance variations among standards on the accuracy of the thru-reflect-line (TRL) calibration technique. The impedance transformer method is adopted to derive the expressions of the calibration coefficient errors due to the manufacturing tolerances. It is found that three factors can affect the magnitude of the errors in the calibration coefficients (c/a and b terms), which are crucial to get the final calibrated results. The first factor is related to the original parameters of the error networks (test fixtures): the larger the insertion losses, the smaller the error in b; the error in c/a may see an opposite trend if the error network is lossy instead of lossless. The second factor is denoted as the phase contribution (one of the three multipliers of the derived error expression): the magnitude of this error contributing item is approximately equal to the ratio of two hyperbolic sine functions, the variables of which are the length of Line and the length difference between Line and Thru, respectively. The third factor comes from the impedance differences between Thru and Line: the smaller the impedance variation, the smaller the error. The error analysis, presented here, can help engineers evaluate the calibration accuracy by analyzing the error contributing items. It also can be further used to guide test fixture designs to maximize TRL's error immunity to the transmission line characteristic impedance variations.

A Thru-free Multiline Calibration

A calibration method for vector network analyzers using a line and three or more offset-reflect standards

Validation of the Reference Impedance in Multiline Calibration with Stepped Impedance Standards

An enhanced Line-Reflect-Reflect-Match calibration

Thru-Reflect-Line Calibration Technique: Error Analysis for Characteristic Impedance Variations in the Line Standards

A Unified Approach for Reformulations of LRM/LRMM/LRRM Calibration Algorithms Based on the T-Matrix Representation

A hybrid probe-tip calibration for multiport vector network analyzers

High Accuracy Calibration Method for Multi-Line Structured Light Three-Dimensional Scanning Measurement System Based on Grating Diffraction.

Symmetric-Reciprocal-Match Method for Vector Network Analyzer Calibration

Material Measurements Using VNA-Based Material Characterization Kits Subject to Thru-Reflect-Line Calibration

Calibrate the Non-Orthogonal Error of AFM with Two-Dimensional Self-Traceable Grating.

A Method to Determine LRRM Calibration Standards in Measurement Configurations Affected by Leakage

MMIC on-Wafer Test Method Based on Hybrid Balanced and Unbalanced RF Pad Structures

Monte Carlo Analysis of Measurement Uncertainties for On-Wafer Multiline TRL Calibration Including Dynamic Accuracy

Calibration of a Multi-Beam LIDAR by Using Linear Instrumental Error Model

One-Port Direct/Reverse Method for Characterizing VNA Calibration Standards

Application of Weighting Algorithm for Enhanced Broadband Vector Network Analyzer Measurements

A Novel Four-Port Symmetric Probe Calibration Method for On-Wafer S-Parameter Measurement

2-Port GSG Probe Calibration Using TRL and 16-Term Error Model Up to 100Ghz